Solar EVA encapsulant is made by ethylene vinyl acetate (EVA) , eva encapsulant 2008B especially for crystal and polycrystalline silicon module encapsulation, after cured, it is characterized with high adhesion, excellent weather and uv resistance, good insulation, low shrinkage, high optical transmission. V-gool EVA Encapsulant outstanding property: 1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61215 2. Excellent adhesive strength with glass and TPT 60N/cm 3. Light transmission > 91% 4. Cross-linking rate is ranged from 80-85%. Cartons with pallet.
Solar EVA encapsulant is made by ethylene vinyl acetate (EVA), EVA encapsulant 2008a especially for thin film module encapsulation, after cured, it is characterized with high adhesion, excellent weather and UV resistance, good insulation, low shrinkage, high optical transmission. V-gool EVA Encapsulant outstanding property: 1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61730 2. Excellent adhesive strength with glass and TPT £¾80N/cm, suitable for double glass structure, no bubbles and Delamination. 3. Light transmission > 91% 4. Cross-linking rate is ranged from 80-90%. Cartons with pallet.
Solar EVA encapsulant is made by ethylene vinyl acetate (EVA) , EVA encapsulant 2009 especially for C-SI module encapsulation , after cured , it is characterized with high adhesion , excellent weather and uv resistance, good insulation , low shrinkage , high optical transmission. V-gool EVA Encapsulant outstanding property: 1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61215 2. Excellent adhesive strength with glass and TPT £¾80N/cm. 3. Light transmission up to 92% 4. Cross-linking rate is ranged from 80-90%. Carton with pallets.
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Solar Sheets: We are doing trading of solar back sheet & eva sheets also based on customers requirement. Maximum we are keeping stock in our factory and supply the same as per customers requirement.
Supplier: Solar EVA film, solar EVA foil, solar EVA sheet, solar panel material
Supplier: Solar raw materials, solar glass, back sheet, EVA, solar cells, junction boxes
Features of Dwell s EPE(EVA/POE/EVA) solar film extrusion line: Film Layers structure: According to the finished film, EVA/POE/EVA film has three layers(EPE film). It will be based on the customer requirements, EPE solar film extrusion line can also produce EVA or POE single layer. China EVA / POE / EPE solar film is used for solar cell encapsulation. After lamination and curing, it is bonded and sealed. It plays the role of high light transmittance, preventing water vapor penetration, high and low-temperature resistance, and ultraviolet light resistance to ensure the stable and efficient use of battery modules. It is a durable and reliable packaging material. The EVA / POE / EPE packaging film extrusion line of Dwell machinery is in a leading position in the world. Advantages of the Dwell EPE(EVA/POE/EVA) solar film extrusion line If producing EPE film, the line speed of the EPE solar film extrusion line can reach 12m/min-15m/min, if EVA, can reach15-18m/min, and if POE, can reach 10-13m/min. Cooling parts to ensure shrinkage rate is less than 3%. DWELL special winder to ensure micro-tension, and achieve automatic winding and cutting. Comparison of the Dwell EPE(EVA/POE/EVA) solar film and EVA solar film and POE solar film 1.Transparent EVA solar film: with high light transmittance, it is used for bonding glass and cells; The raw materials are EVA resin and various modifiers, which are cheaper. 2.White EVA solar film: compared with transparent EVA solar film, the pretreatment of white fillers such as titanium dioxide is added. It has a strong barrier, low light transmittance, and high reflectivity, which can improve the power generation of components. It has strong resistance to damp-heat aging and ultraviolet aging and can inhibit the aging and cracking of the back sheet. 3.Poe solar film: Poe solar film has a higher water vapor barrier rate and stronger anti-PID performance so the module can be used for a long time. It is the main packaging adhesive film of a double-sided double glass module and film module at present. 4.EPE(EVA/POE/EVA)solar film: It has both the anti-PID performance of POE and lamination efficiency of EVA solar film and reduces the use of POE particles to achieve cost reduction and efficiency increase. At present, it is mainly used in high-efficiency components.
The monocrystalline silicon solar module are composed of solar cells with the average conversion efficiency above 15%, EVA sheet, solar glass and Tedlar (TPT) back sheet compounded from fluoric-plastic and dacron. The module adopts reliable welding technology and high-vacuum heating lamination process and is equipped with anticorrosion-treated aluminum alloy frame and watertight terminal box, According with IEC61215 and the II grade standard electrically. As a result, it takes on a rational structure, has an ultraviolet aging resistance. Design the characteristics: Even under the condition that the light is dim , the monocrystalline silicon solar cell of above 15% of the efficiency can produce the electricity greatly in the greatest power output; Power output match with the most ideal solar module; With defended and reflected membrane and high transparentglass, the module can increase the energy greatly . Firm frame reliably: Only for 46mm thick extremely thin positive pole anticorrosion-treated aluminum frame; Safety glass and protect back sheet can avoid damage and water ; Pour into the terminal box that the silicon froze the glue; Utilize EVA and TPT can prevent water entering effectively; Seamless system conformity: On the frame opens has 4 - 6 holes, is easy to install in all systems structure; Provides the standard MC attachment and the 1m long electric cable Has 3 diodes in the joint box, greatly reduced the system power loss which camouflaged from the module. The multicrystalline silicon solar modules are composed of solar cells with the average conversion efficiency above 15%, EVA sheet, solar glass and Tedlar (TPT) back sheet compounded from fluoric-plastic and dacron. The module adopts reliable welding technology and high-vacuum heating lamination process and is equipped with anticorrosion-treated aluminum alloy frame and watertight terminal box, According with IEC61215 and the II grade standard electrically. As a result, it takes on a rational structure, has an ultraviolet aging resistance. Design the characteristics: Even under the condition that the light is dim , the multicrystalline silicon solar cell of above 15% of the efficiency can produce the electricity greatly in the greatest power output; Power output match with the most ideal solar module With defended and reflected membrane and high transparent glass, the module can increase the energy greatly; Firm frame reliably: Only for 46mm thick extremely thin positive pole anticorrosion-treated aluminum frame; Safety glass and protect back sheet can avoid damage and water; Pour into the terminal box that the silicon froze the glue; Utilize EVA and TPT can prevent water entering effectively. Seamless system conformity: On the frame opens has 4 - 6 holes, is easy to install in all systems structure; Provides the standard MC attachment and the 1m long electric cable Has 3 diodes in the joint box, greatly reduced the system power loss which camouflaged from the module.
