Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
We are one of the best supliers of scrap mettallic products here in cameroon we are also supply our products at moderate prices to interteed buyers so intereted buyers should contact us via for more info on our products below are some of our products been supplied by us Billets,Aluminum Billets,Other Billets,Steel Billets,Ingots,Aluminum Ingots,Antimony Ingots,Bismuth Ingots,opper Ingots,antimonial lead ingots,Lead Ingots ,Magnesium Ingots,Manganese Ingots,Silicon Ingots,Steel Ingots,Tin Ingots,Titanium Ingots ,Zinc Ingots,Pig Iron,aluminium scrap,copper scrap etc
Seller guarantees to the Buyer that the Goods delivered under the present Contract shall correspond to the characteristics shown below: ISRI USA GOST 2787-75 Russia HMS 1&2 (80/20) IRSI 200-206Steel scrap Defined as HMS 1 & 2 in an 80/20 mix under IRSI c odes 200 through 206. No n- metal impurities total 1 % (one percent) or less - no radiation, arms, ammunition, bombs, shells, mines, cartridges, Sealed gas carbon steel is not included in this scrap -we sell that as a separate item.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
Hallo Good day we can supply Iron Scrap HMS 1 & 2 Origin - Japan Quantity 20 to 100K per month Interested importers kindly contact Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to end seller we assure best price and mark up ( conditional )
R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants
HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. HMS 1/2 SCRAP / METAL SCRAP / HEAVY STEEL SCRAP / /Heavy Melting Steel Scrap Metals for sale. We can supply you HMS scraps, HMS 1, HMS 1/2, Used rails scraps. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Used clean rail, without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive for armour plated materials, mud or wastes and maximum harmless impurities is less than 0.1%;
Hallo we have ready stock Iron scrap Origin - Philippine Factory Dismantled Scrap Quantity - 8,50,000 MT Buyer can visit site after sign SPA and Provide BCL Payment - LC Interested importers kindly contact NO LONG CHAIN BROKERS PLEASE Direct buyers , Mandates , Intermediaters who knows the end buyer well are welcome first to First come sale MOQ 50k MT Partial shipment acceptable
