for sale used filtered Transformer oil
Vfd-double-stage high-efficiency vacuum insulation oil purifier Application(oil filtration, oil purification, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, oil filter, oil purifier, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil processing) Vfd series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. From the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. Vfd series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Used Engine Oil
I. Series zyd double-stage vacuum transformer oil purifier machine is mainly used for purifying the insulating oil, transformer oil, mutual oil, switch oil, dielectric oil and so on. Specially, it works with the regeneration system, can decolor for the badly waste transformer oil with a high efficiency. V. It can vacuum filling oil to transformer, vacuum dry transformer and on-line operation transformer . Vi. The standard zyd system is designed for processing oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers). Vii. The oil technical data after series zyd oil purifier machine treatment: 1. Gas content less than 0.1% 2. Impurity size less than 1m without free carbon 3. Oil dielectric strength (breakdown voltage) more than 75kv 4. Acidity value less than 0.01 mgkoh/g 5. Dielectric loss factors at 90c less than 0.001 500kg, 1200*1000*1300(mm)
Series ZYD Double-Stage Vacuum Transformer Oil Purification Systems is used for transformer oil dehydration and transformer oil degasification as well as other electrical insulating liquids such as silicone fluids. The ZYD Process is able to increase and maintain the oil's dielectric strength and includes the removal of free and soluble water, free and dissolved air and gases and other particulate matter. The standard ZYD system is designed for processing oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers). Series ZYD oil purifier can be used as an independent vacuum source with functions of vacuum drying and vacuum oiling. Feature 1. ZYD can evacuate the vacuum for the electric equipments separately, such as the transformer. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state. 2. This machine have two vacuum pumps (one is the vacuum pump, other one is the roots pump), which can improve the working value highly. Making sure the water-content of the treated oil is less than 3 ppm. 3. The machine adopts the double-infrared liquid automatic controller, pressure automatic-protector which can make sure the machine works online for 150 hours continuously without person. So it is a reliable and high automatically machine. 4. Besides the common vacuum oil purifiers function of dewatering, degassing, and removing the impurity, this machine can regenerate the seriously bad oil by separating the electric-polarity materials, such as deeply oxides and free carbon from the oil effectively. The treated oil can reach the specifications of the new oil, such as the oil dielectric strength, flash point, acid value and oxidation resisting etc. 5 Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 6. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 8. Functions of live line work onsite, vacuum drying and vacuum oiling. Advantages: Comparing with single stage transformer oil purifier, Series ZYD oil purifier can increase the effectiveness more than three times, more quickly and completely dewater, degas, remove particles to get higher dielectric strength. This equipment can be used as independent vacuum source with the functions of vacuum drying and vacuum oiling for the electric plants.
Supplier: Base oil sn60, 70, 100, 150, 350, 400, 500, 550, 600, 650; jet fuel a1, jp54, crude oil, bitumen 50,60/70, 90/100 & all grades of bitumen, used cooking oil, transformer oil, industrial oil, all types of grease, lng/lpg, used motor or engine oil, all types of motor oil, lubricants, additives and types of petroleum products
Supplier: Used transformer oil
Buyer: Used transformer oil
BASE Oil-SN 60, 70, 150, 300, 500, 600, 650 & BS 150.
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
