Automotive Dashboard and Leather Wax Spray Contains silicone UV resistant Cleans and Restores For Rubber and Plastic Scented spray Factory supports OEM order Lemon/Strawberry/New Car/Jasmine/Lavender/Vanilla and more 300ml/450ml/750ml
Basic Characteristics Appearance: slightly yellow transparent liquid Ionic: slight cationic PH value: 4.5-6.5 Solubility: can be dissolved in water at any ratio Hand feeling: special soft, smooth Features And Advantages This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing; Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect. Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing; Dilution and use the method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 Package And Storage 50kg or 200kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated. The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed. Adding appropriate beeswax can increase the hardness of the finished wax Animal oil and fat extracted from honeycomb nest, granular, good toughness, suitable for mixing with other waxes, melting point 65 degrees Celsius, can also be used to make difficult silicone mold wax alone.
Supplier: Calcium carbonate, silicone oils, waxes, petroleum jelly, defoamers, acid-slurry, pigments, acitic acid, all acids, soap noodles
Citru-Etch II Emulsion is a stable, micro particle, (O/W) oil in water emulsion, formulated for use in investment casting to remove silicone release coating deposits and, with minimum etching, chemically modify wax pattern surfaces to enhance refractory slurry coat adhesion. Citru-Etch II Emulsion is formulated to provide both an environmentally responsible and safe method of use. The emulsion is sufficiently stable to function as a uniform cleaner for wax patterns and allows several months shelf life for unopened drums stored under ambient conditions. CAUTION: Heat destabilizes the Citru-Etch II Emulsion; drums should be stored inside in an air-conditioned environment, such as the slurry room. In use, Citru-Etch II Emulsion functions as a typical nonionic detergent to effect removal of silicone deposits from wax pattern surfaces. Wax patterns on removal from a CitruEtch II Emulsion bath tend to retain a "hydrophobic" surface that assures good drainage. The surface, however, is also "oleophilic" and strongly couples to water based baths such as rinse, prewet, or refractory slurry that contains a suitable surfactant level. Price Range: 400 - 450 INR Minimum Quantity: 30 Kg Product Type: Wax Pattern Cleaner Appearance: White Form: Liquid Ph Level: 6.5 to 8.0 Density: @ 20o C 0.90 - 1.00 g/ml FOB: Greater Noida (India) Payment Terms: Cash In Advance (CIA)
The Polywax hard wax is a full body depilatory wax . The Polywax hard wax can be applied safely in areas of the body such as the face and the delicate areas. Available in block (500 gr) and bead form (250 gr). For more information about the product and or quoation, contact us.
POLYWAX BITE REGISTRATION WAX stays stable when warm and when cooled down, giving excellent registration without any distortion and deformation. Comes in two forms: straight and curved. Availaible in packaging of 500 gr or 1000 gr.
The POLYWAX WAX BLANK are used in the fabrication of wax modeling, in the lost wax process for casting, making denture restorations and for frameworks for crown and bridge models . It was developed for cast and pressing techniques. Various thickness available, with step and without step in different colours.
The Polywax Orthodontic wax ensures the gums and the linings of your cheeks and lips. It protects from the sharp parts of the orthodontic braces and wires. It is easily applied and conveniently packed. Each box contains 50 packs. Available in different flavours.
