Product: thermoplastic road marking paint Used for: asphalt and concrete Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦ Appearance: powder Color: white/yellow (or other colors according to buyer's requirement) Coating thickness: 1.6mm-2.0mm Abrasion resistance: 56.8 Glass beads: 0%/10%/20%/25%/30% Softening temperature: 90-104â°c Heating temperature180-220â°c Drying time after marking touch dryâ??3 mins full dryâ??10 mins Shelf life 1 year Storage: store in a tightly sealed container in a cool & dry place Area of line: 1 ton thermoplastic paint can mark about 200 m2
Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.
Other Names: Traffic Hot-melt Paint, Road marking Paint High-reflective Thermoplastic JOLINE Place of Origin: Ho Chi Minh City, Vietnam Main Raw Material: Thermoplastic Ester Gum, Maleic Resin, Glass beads Usage: Road Marking Paint Application Method: Road marking applicator State: Powder Coating Brand Name: JOTON JOLINE Model Number: JOLINE CA Intermix glass beads ratio: >30% Daytime Reflective index: min 80% Film thickness: 1.5 -2 mm Density:
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
The biggest difference between thermoplastic spraying road marking paint and common thermoplastic screeding coating material is that the viscosity and density of the coating and the construction process are different. During the construction, the molten paint is applied to the road surface by centrifugal force to form a road marking paint. The thermoplastic spraying road marking is thinner, the construction is fast and efficient, and the durability is close to the ordinary hot-melt coating line, which makes it economically more advantageous than the ordinary hot-melt type. Generally applicable to the old road over coating and road sections with very rough road structure.
Road Marking Paint
Road Marking Reflexive Paint (yellow, Black)
It is the most typical cold paint road marking machine, oftentimes called cold paint striper or cold striping machine as well, is widely used for spraying cold-solvent paint, water-based paint and other single-component paint, can be applicable to various construction environments as well. It has the characteristics of stable performance, flexible operation and convenient construction and so on. Engine 5.5HP Honda gasoline engine Marking method High pressure airless spraying Paint pump flow 9L/min Rated maximum working pressure 20Mpa Paint pump and control mode Piston reciprocating, single pump Applicable paint Cold-solvent, water-based and other single-component paint Marking width 100-600mm adjustable Spray gun quantity 2 manual fixed spray gun Dimension 1780x980x1200mm Weigh 150Kg
The waterbone road marking paint is made of water as the dispersion medium, emulsified polyacrylic resin as the binder, and processed with the corresponding pigments, fillers and additives. During the construction process, the VOC emission is very small. A green product that can achieve clean production.