100% quality inspection !! Nozzle orifices : 0.08mm ~ 1.20mm Threads : 10/24, 12/24, 1/8npt Materials : stainless steel, nickel plated brass, brass Flow rate : various choices. Customization available.( + / - 5% tolerance) Droplet size : 6 microns ~ 70 microns (depend on working pressure) Spray angle : 50 degree above
Replacement nozzle set for aluminum spray can G012
Material:PP. Features: 1.All the parts are precisely manufactured, the spray particles is 20-40 micro , 2.Spray Angle: 80-90 degrees, 3. Water output: 1.6-3.4/hr, 4.Water system pressure: 3-14 kg, 5.The cove Adveantages:it features a strainer inside which can gurantee no-clogging being blocked and more durable. It also has the function of anti-drip that the nozzle will not drip when the pressre system is closed.
Nozzle body is made of brasss, with stainless steel nozzle core and stainless steel flow leading vane(include a leakproof device) inside. Under hydraulic pressure of 70kg/cmâ² to 120kg/cmâ², it flows with high speed and forms centrifugal volution in flow leading vane. Then it sprays tiny hollow spraying drop of around 50 um with teflon which can be widely applied in moisturization and man-made mist. Mesh, it introduced american driller for drill of spray hole, with hole diameter of 0.1mm to 0.15mm. Compared with air moisturization, it cuts cost by ten times.
Mist nozzle.
AAZ fine mist nozzle utilizes the fluid pressure to produce the extremely fine particle, and the spray pattern is a uniform hollow cone, which can make the spray like fogs. Application: 1. Humidification/moistening: Greenhouse humidifying 2. Cooling: evaporative cooling, gas cooling, metal cooling 3. Diffusion of liquid: chemical, pharmaceutical, disinfectant 4. Light misting/fogging 5. Dust control Customization of Material and connections upon request.
The nozzle is used for moistening and coating which requires accurate spraying and coating area Hole diameter: 0.5, 1., 1.3, 2mm Common application Coating Moistening Viscous liquid spraying Circulation system Design features Automatic fine atomizing nozzle could independently control liquid atomizing gas pressure and fan gas pressure to adjust flow rate, droplet size, spraying Distribution and coverage area accurately. Resulting from the scientific and rational design, the nozzle can spray viscous liquid ideally. Lso, the single gas atomizing pipeline can be adjusted to alter the droplet size without altering the flow rate.With an accessional entrance/exit passage, the viscous liquid circles to keep itself flowing. Carton
The 6160 fixed tank washing nozzleassemblyfeatures a large flow capacity for cleaningtanks up to 3.1 meters in diamter. The fw rate can be changed by using the size of 1/4" or 1/8" full cone spray nozzle. The 6160 nozzle can pass throught tank mouth of 130mm of large in diameter. For cleaning large tanks where extra-large flow capacity is use to clean the tank which diameter reaches 6.7 meter. It uses size of 1/2", 3/4" or 1" ufll cone to change the flow rates. The 10250-1 nozzle assembly can pass throught tank mouth of 230mm in diameter. For deep tanks the 10250-1 version is available with a 1.5 inch bottom outlet connection for use with a pipe extension and a 6160 nozzle assembly. Common Application: 1.Washbox defoaming 2.Stock tank cleaning
This kind of nozzle is used for the trimming of the paper that supply a precise, clean cut. It can produce a straight needle solid stream. It can work at high pressure of 140 bar. This nozzle orifice material we have the SS316 and ceramic. NOTE Material: CY38170 brass nozzles for the main materials, filter materials for stainless steel, ceramic nozzle for the inlay.
