PP , Melt blown filter cartridge, 5 micron. ID:1.1(28mm) OD:2.5(63mm) L:10 (254mm)
Price description 1. Material: pp, stainless steel, absorbent cotton fiber; 2. Precision: 0.5-100um; 3. Working temperature: ¤90°c; 4. Pressure: 20°c:0.34mpa, 70°c:0.24mpa; 5. Flow:632-1890l/min; 6. Efficiency: 99.99%. Feature--- pp melt blown filter cartridge for water filter 1. Set adsorption, filtration, intercept, catalysis in a body; 2. Acid, alkali, salt and different kinds of organic solvent; 3. Big flow, high filters efficiency, change convenience .Etc; 4. High filtrating precision, big flow, small differential pressure , high compression strength , big Quantity accept dirt . Non-toxic, tasteless , non secondary pollution. Advantages--- pp melt blown filter cartridge for water filter 1. Stainless steel pleated filter element has low pressure drop due to high porosity; 2. Easily cleanable and with long life-span; 3.Under iso9001-2000 quality certificate
OD 6 152.4mm L 40 1016mm 60 1524mm Flow 110m3h 60 Rate 1,3,5,10,30,50,70 Micron. Material PP Glass fiber Replacement PALL Pentair, Aquatec, Eaton, Graver, Mahle, Aqua
RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media in between, it removes sediments as well as organic pollution from water. Specification RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media (usually GAC) in between, it removes sediments as well as organic pollution from water. Compare to traditional UDF filter, RFC filter provides higher flow rate and better sediment reduction. Features NSF Certified activated carbon High flow rate Low pressure drop Rapid dechlorination Technical data Maximum temperature
Polypropylene pleated filter is the product for large flow having maximum filtration area due to its continuous pleated structure, and not only has long service life by the precision filtration performance (more than 90%) and low differential pressure, but also does not have breakaway of the filter materials and matter erupted by making out perfect structure to prevent solution leak with structural stability through heat sealing. Inner diameter:28mm Outer diameter:70/83/130mm Length:10"/20"/30"/40"
Pall Ultipleat Replacement Filter Media: PP Melt blown,Pleated glass fiber,Pleated depth PP Length: 20"(508 mm),40"(1016 mm),60"(1524 mm) Outside Diameter: 6 inch (152 mm) Filtration Rating: 1¼m,4.5¼m,6¼m,10¼m,20¼m,40¼m,70¼m,100¼m Support/Drainage: Polypropylene (PP) End Cap Material: Glass fiber reinforced Polypropylene (PP) Seal Material: EPDM,NBR Features: 1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original Pall Ultipleat filter use outer hard netting. 2.Beta Rating can reach 5000 (99.98% efficiency) & Highest flow rate 110 m³/h 3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required. 4.Absolute rated filter medium for reproducible performance. 5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter
Pall Ultipleat Replacement Filter Media: PP Melt blown,Pleated glass fiber,Pleated depth PP Length: 20"(508 mm),40"(1016 mm),60"(1524 mm) Outside Diameter: 6 inch (152 mm) Filtration Rating: 1m,4.5m,6m,10m,20m,40m,70m,100m Support/Drainage: Polypropylene (PP) End Cap Material: Glass fiber reinforced Polypropylene (PP) Seal Material: EPDM,NBR Features: 1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original Pall Ultipleat filter use outer hard netting. 2.Beta Rating can reach 5000 (99.98% efficiency) & Highest flow rate 110 m³/h 3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required. 4.Absolute rated filter medium for reproducible performance. 5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter
Membrane pleated filter cartridge Matterial:pp od.:º¦69mm id.:º¦28mm length:10" end cap options: 1.Single open end 2.Double open end 3.222 o-ring with flat/fin end 4.226 o-ring with flat/fin end
PP , Melt blown filter cartridge, 5 micron. ID 1.1(28mm) OD 2.5(63mm) L 20 (508mm)
