Inconel nickel alloy It is a solid-solution strengthened nickel-based deformed superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile properties and fatigue properties from low temperature to 980 �° C, and is resistant to salt spray. Stress corrosion in atmosphere. Therefore, it can be widely used in the manufacture of aero-engine parts, aerospace structural parts and chemical equipment. The alloy has good processing and welding properties, and can supply a variety of plates, bars, pipes, wires, strips and forgings
Incoloy is a nickel-chromium-iron alloy, which is a nickel-iron-chromium iron-nickel-based corrosion-resistant alloy designed for anti-oxidation and carbonization when the temperature rises. This alloy is used in high-temperature water vapor, including steam-air-CO2 In mixed gas, it has good corrosion resistance. In some high-temperature and high-pressure water media, its stress corrosion resistance is significantly better than 18-8 stainless steel and Inconel600; it also has good corrosion resistance in H2+H2S media. In the alkaline medium containing NaOH, its stress corrosion resistance is better than high-nickel alloys such as Inconel600.
Lead Alloys
Bronze Alloys
Aluminum Alloys
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Monel 404 is a copper-nickel alloy that has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The alloy also has low permeability and good brazing properties, low magnetic induction, and high strength. Application fields: Monel 404 is mainly used in chemical and petrochemical and marine development and other fields. It can be used to manufacture various heat exchange equipment, boiler feed water heaters, petroleum and chemical pipelines, containers, towers, tanks, valves, pumps, reactors, shafts, etc. We can provide the following the form:Monel alloy404 coil; Monel alloy 404 strip;Monel alloy 404 plate; Monel alloy 404 sheets; Monel alloy 404 tube; Monel alloy 404 pipe;Monel alloy 404 flat; Monel alloy 404 bar UNS:N04404
Monel 401 has excellent strength and plasticity, and has good pressure processing performance in both cold and hot states. It is a corrosion-resistant alloy with large dosage, wide application and excellent comprehensive performance. The alloy has excellent corrosion resistance in HF and F2 media, and is one of the few important materials that can withstand hydrofluoric acid. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. A kind of Monel alloy, its alloy structure is a high-strength single-phase solid solution, 3 a nickel-based alloy similar to Monel 400, and the corrosion resistance of the metal is fundamentally obtained by hindering the migration of charged particles through the discharge process of hydrogen ions. Obtained, the addition of 30% Cu by mass fraction minimizes the corrosion rate of TH, Ni in F, Cl and other halogen element ionic media, and the higher the Cu content, the better the resistance to sulfuric acid and phosphoric acid. Adding mass fraction to Monel 401 55% Cu improves the corrosion resistance of the alloy in reducing acids. Application fields: Wirewound Resistors bimetal contact Electrical and Electronic Applications Marine Engineering Chemical and Hydrocarbon Processing Equipment petrol and fresh water tanks Distiller degas heater Boiler feed water heaters and other heat exchangers Valves, pumps, shafts, fittings and fasteners Industrial heat exchanger Chlorinated solvents Crude distillation tower We can provide the following the form:Monel alloy401 coil; Monel alloy 401 strip;Monel alloy 401 plate; Monel alloy 401 sheets; Monel alloy 401 tube; Monel alloy 401 pipe;Monel alloy 401 flat; Monel alloy 401 bar UNS:N04401
Incoloy alloy 800, also known as UNS N08800, is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and carburization at high temperatures. It has a high level of resistance to corrosion in many environments, including acids, alkalis, and seawater. Incoloy alloy 800 has a chemical composition of approximately 32% nickel, 21% chromium, and 46% iron, with small amounts of carbon, aluminum, and titanium. It has good mechanical properties and can be easily formed, machined, and welded.The alloy's excellent high-temperature strength and oxidation resistance make it suitable for use in heat-treating equipment such as baskets, trays, and fixtures. Incoloy alloy 800H is a high-temperature nickel-iron-chromium alloy, also known as UNS N08810. Some international standards and specifications for Incoloy alloy 800H include: American standards: ASTM B407, ASTM B163, ASTM B515, ASTM B514, ASTM B407, ASTM B408, ASTM B409, ASTM B564, ASME SB-407, ASME SB-163, ASME SB-515, ASME SB-514, ASME SB-407, ASME SB-408, ASME SB-409, ASME SB-564 European standards: EN 1.4958, EN 1.4959, EN 10216-5, EN 10217-7, EN 10222-5, EN 10269, EN 10272, EN 10296-2, EN 10028-7, EN 10095, EN 10204-3.1 Japanese standards: JIS G3456, JIS G3459, JIS G3463, JIS G3448 Chinese standards: GB/T 14992, GB/T 14994, GB/T 15001, GB/T 15003, GB/T 15007, GB/T 15009, GB/T 15011, GB/T 15013, GB/T 15014, GB/T 15021, GB/T 15023, GB/T 15025, GB/T 15027, GB/T 15029, GB/T 15031, GB/T 15033, GB/T 15037, GB/T 15039, GB/T 15041, GB/T 15043, GB/T 15045, GB/T 15047, GB/T 15049, GB/T 15051, GB/T 15053, GB/T 15055, GB/T 15057, GB/T 15059, GB/T 15061, GB/T 15063, GB/T 15065, GB/T 15067, GB/T 15069, GB/T 15071, GB/T 15073, GB/T 15075, GB/T 15077, GB/T 15079, GB/T 15081, GB/T 15083, GB/T 15085, GB/T 15087, GB/T 15089, GB/T 15091, GB/T 15093, GB/T 15095, GB/T 15097, GB/T 15099, GB/T 15101, GB/T 15103, GB/T 15105, GB/T 15107, GB/T 15109, GB/T 15111, GB/T 15113, GB/T 15115, GB/T 15117, GB/T 15119, GB/T 15121. GB/JISï¼?NCF800H/UNSï¼?N08810/W.Nrï¼?1.4958 We can provide the following the form:Incoloy alloy800H coil; Incoloy alloy 800H strip;Incoloy alloy 800H plate; Incoloy alloy 800H sheets; Incoloy alloy 800H tube; Incoloy alloy 800H pipe; Incoloy alloy 800H flat; Incoloy alloy 800H bar
INCOLOY alloy 800HP is a high-performance nickel-iron-chromium alloy that offers excellent resistance to oxidation, carburization, and sulfidation. It is used in a wide range of high-temperature applications such as furnace components, heat exchangers, petrochemical processing equipment, and power generation. This alloy also has good mechanical properties, making it suitable for use in demanding environments.In conclusion, INCOLOY alloy 800HP is a high-performance nickel-iron-chromium alloy with excellent resistance to oxidation, carburization, and sulfidation. Its good mechanical properties make it suitable for use in demanding environments, and it is commonly used in a variety of high-temperature applications such as furnace components, heat exchangers, petrochemical processing equipment, and power generation. American standards: ASTM B407, ASTM B163, ASTM B515, ASTM B514, ASTM B407, ASTM B408, ASTM B409, ASTM B564, ASME SB-407, ASME SB-163, ASME SB-515, ASME SB-514, ASME SB-407, ASME SB-408, ASME SB-409, ASME SB-564 European standards: EN 1.4876, EN 1.4959, EN 10216-5, EN 10217-7, EN 10222-5, EN 10269, EN 10272, EN 10296-2, EN 10028-7, EN 10095, EN 10204-3.1 Japanese standards: JIS NW 0800 (similar to Incoloy 800), JIS NW 0800H (similar to Incoloy 800H) Chinese standards: GB/T 14992, GB/T 14994, GB/T 15001, GB/T 15003, GB/T 15007, GB/T 15009, GB/T 15011, GB/T 15013, GB/T 15014, GB/T 15021, GB/T 15023, GB/T 15025, GB/T 15027, GB/T 15029, GB/T 15031, GB/T 15033, GB/T 15037, GB/T 15039, GB/T 15041, GB/T 15043, GB/T 15045, GB/T 15047, GB/T 15049, GB/T 15051, GB/T 15053, GB/T 15055, GB/T 15057, GB/T 15059, GB/T 15061, GB/T 15063, GB/T 15065, GB/T 15067, GB/T 15069, GB/T 15071, GB/T 15073, GB/T 15075, GB/T 15077, GB/T 15079, GB/T 15081, GB/T 15083, GB/T 15085, GB/T 15087, GB/T 15089, GB/T 15091, GB/T 15093, GB/T 15095, GB/T 15097, GB/T 15099, GB/T 15101, GB/T 15103, GB/T 15105, GB/T 15107, GB/T 15109, GB/T 15111, GB/T 15113, GB/T 15115, GB/T 15117, GB/T 15119, GB/T 15121. GB/JIS:NW 0800/UNS:N08811/W.Nr:1.4959 We can provide the following the form:Incoloy alloy800HP coil; Incoloy alloy 800HP strip;Incoloy alloy 800HP plate; Incoloy alloy 800HP sheets; Incoloy alloy 800HP tube; Incoloy alloy 800HP pipe;Incoloy alloy 800HP flat; Incoloy alloy 800HP bar
