(1)Product
Superior raw materials, advanced automated equipment, unique heat treatment technique and strict quality control system contribute to better performance for the general hardness of shandong iraeta grinding steel ball.
1) production standardYb/t091-2005
2) size: 25-150 mm
3) surface hardnessHrc57-67 hrc
4) volume hardnessHrc56-64
5) breakage rate<0.57%
6) lost round rate<1%
7) impact toughness12 j/cm2
8) material : customized raw material, b2, b3, bu chrome
9) forging way: hydraumatic
10) core hardnes =50;=55;=58;=60
11) dropping test: =12000
(2)Raw material
With the purchase of 400 thousand tons of steels each year, we are able to provide customizable raw materials and get vip service from steel plants. All raw materials are purchased directly from standard steel enterprises such as laiwu steel group, shijiazhuang steel, huaiyin steel, etc. The quality of different batches of raw materials is quite stable.
(3)Equipment
Iraeta has 7 full automatic hot-rolling steel ball production lines. We are among the minority of suppliers who are able to directly produce balls with dia80mm and the above size by hot-rolled technology.
(4)Lab
A national certified laboratory in accordance with the international standard iso17025 was established in iraeta.
(5) specialist
1) customized raw material. ( the formal steel material factory)
2) high automatic equipment.( automatic hot-rolling production lines )
3) the unique heat treatment. ( introducing spainsh technology)
4) strict quality control. ( equipped with national approved laboratory meeting requirements of iso17025)
(1) Product
Superior raw materials, advanced automated equipment, unique heat treatment technique and strict quality control system contribute to better performance for the general hardness of shandong iraeta grinding steel ball.
1) production standard Yb/t091-2005
2) size: 25-150 mm
3) surface hardness Hrc57-67 hrc
4) volume hardness Hrc56-64
5) breakage rate <0.57%
6) lost round rate <1%
7) impact toughness 12 j/cm2
8) material : customized raw material, b2, b3, bu chrome
9) forging way: hydraumatic
10) core hardnes =50;=55;=58;=60
11) dropping test: =12000
(2) Raw material
With the purchase of 400 thousand tons of steels each year, we are able to provide customizable raw materials and get vip service from steel plants. All raw materials are purchased directly from standard steel enterprises such as laiwu steel group, shijiazhuang steel, huaiyin steel, etc. The quality of different batches of raw materials is quite stable.
(3) Equipment
Iraeta has 7 full automatic hot-rolling steel ball production lines. We are among the minority of suppliers who are able to directly produce balls with dia80mm and the above size by hot-rolled technology.
(4) Lab
A national certified laboratory in accordance with the international standard iso17025 was established in iraeta.
(5) specialist
1) customized raw material. ( the formal steel material factory)
2) high automatic equipment.( automatic hot-rolling production lines )
3) the unique heat treatment. ( introducing spainsh technology)
4) strict quality control. ( equipped with national approved laboratory meeting requirements of iso17025)
5) iso9001, iso14001 , ohsas18001, etc.
(6) packing
1.Container bag(1000kg/bag)
2.Iron drum
3.According to your requirements
We set up a professional technical team with the cooperation of research institutions, colleges, and universities. For instance, chinese academy of sciences are our direct cooperator, professor mr bern klein university of british columbia, canada is one of our team members.
1.Material: b2, b3, bu
2.Surface hardness: hrc58-65hrc, volume hardness hrc56-63.
3.The impact toughness of our grinding balls is more than 18 j / cm2.
4.The actual broken rate <0.57%
5.Lost round rate: <1%
Forged steel grinding balls:
Suit equipment: both drying and wet ball mills
Tech specs:
The forged plant operates four production lines and sources input barstock directly from hm rolled grinding balls.
It offers a hardness of ¡ö65hrc in surface, slowly decreasing towards the core.
Diameters available: 20 - 15omm (1½¡± --5, ).
Key benefits:
Improved wear resistance due to quenching and tempering..
Steady milling conditions due to wear reduction in wear rate.
It is the best-suited solution to fight wear: it is highly resistant to both abrasion and impact.
1 > high hardness: surface hardness: hrc57-67 hrc, volume hardness hrc56-64.
2 > high impact toughness: the impact toughness of our grinding balls is more than 12 j / cm2.
3 > low broken rate: the actual broken rate is not higher than 1%.
4 > good wear-resistant and lower wear rate.
Our product has precise size, high hardness, high roundness and mechanical properties. It won't deform and crack during its service life. The surface hardness of our product can reach up to 57HRC to 67HRC, and volume hardness can reach up to 56HRC to 64HRC, the difference between the hardness of surface and center are no more than 2HRC. Besides, the impact toughness of our product is greater than 12J/cm2. Further more, the breakage rate of our product is no more than 1% and are close to 0. Our product are widely used in processing facilities such as the iron&steel plant, mineral processing plant, refractory material plant and phosphate fertilizer plant, etc. Above all, all of our products can be customized according to customers’ requirements.
1. Company name: shandong huamin steel ball joint-stock co., ltd.
2. Year of established: 1986
3. Productforged steel ball, rolling forged steel balls, grinding steel balls used in the ball mill and sag
4. Diameter: 20mm to 160mm(1)
5. Material: c: 0.47-1.05 si:0.17-0.37 mn:0.5-1.0 s:0.035max p:0.035max cr:1.2max mo: 0.15max
6. Production technology: huamin mainly have three kind of production technology for forged steel balls.
1) air hammer forged steel balls
2) rolling-forged automatic production line designed by our ourselves, this production line is controlled by automatic equipment, so the hardness is high and toughness is good.
3) rotary-cut automatic production line, this production line gets five national patent. Currently, we mainly use this production line to produce forged steel balls, so the product quality is quite steady and good.
7. Inspection
Huamin have a full set of inspection equipment.We can test hardness, hadness distribution, chemical composition, impact value, micro-structure, dropping test and so on.
8. Packing
Huamin have two kinds of packing method: steel drums or container bags, this two kind of packing can both meet the requirement of repeated shipping and storage, customers can choose any one.
Products detail:
Size: dia20mm to dia150mm
Production capacity: 100ú¼000ton/year
Characteristics: high hardness, good wear resistance, no breakage, even wearing.
Applied field: mines, cement plants, power station, chemical industries etc.
Packing: by steel drum or big bag.
Diameter: 1" to 6
Hardness: hrc55-65
Features: high hardness, no breakage, good wear resistance.
Applications: as a grinding media in sag and ball mills for mines and chemical industries.
We are the largest manufacturer and exporter of grinding steel balls. Our annual output is 100 000 metric tons.Our products are exported to over 20 countries and regions.
Grinding steel balls are available from diameter 1" to 6". They are welcomed by customers in the world based on high quality products, timely delivery, competitive price and best service.
We have established and are establishing a good cooperation relationship with large mining company in the world, such as ghana gold, anglo american, bhp and so on.
We believe in that our cooperation will reduce your purchase cost and improve production efficiency and create more added-value.
