ITEM DESCRIPTION Specifications: Overall Length: 12" Bar thickness: 5 mm Bar width: 2'' Ladder Pattern Bar Material: Damascus Steel Condition: Brand New QUALITY STANDARDS Our Damascus blades are made from high quality non-stainless steels which rival or exceed any Damascus blade made from the 10 series with 4340. Our Damascus combination has taken years to perfect and has been tested under a variety of application which will offer professional performance in categories of toughness, strength (lateral stress) and edge honing and holding ability. In a 5 spot Rockwell test our blades will average near or close to 58 which offers a perfect balances between its toughness and strength. Our blades due to carbon content need to be regularly treated with wax and/or 3 in 1 oil to maintain its superior quality.
ITEM DESCRIPTION Specifications: Overall Length: 12" Bar thickness: 5 mm Bar width: 2'' Rain Drop Pattern Bar Material: Damascus Steel Condition: Brand New QUALITY STANDARDS Our Damascus blades are made from high quality non-stainless steels which rival or exceed any Damascus blade made from the 10 series with 4340. Our Damascus combination has taken years to perfect and has been tested under a variety of application which will offer professional performance in categories of toughness, strength (lateral stress) and edge honing and holding ability. In a 5 spot Rockwell test our blades will average near or close to 58 which offers a perfect balances between its toughness and strength. Our blades due to carbon content need to be regularly treated with wax and/or 3 in 1 oil to maintain its superior quality.
We have ready to send stock of steel billets and angle bars, Angle bars L 250 x 90 154,319 L 150 x 100 29,203 L 150 x 75 43,54 L 130 x 90 0,705 L 150 x 90 80,41 L 160 x 80 31,797 L 180 x 90 57,794 L 200 x 100 54,465 L 120 x 120 5,154 L 130 x 130 12,132 L 140 x 140 49,35 L 150 x 150 28,219 L 160 x 160 102,892 L 180 x 180 31,093 L 90 x 60 76,783 L 100 x 50 124,972 L 70 x 50 27,448 L 75 x 45 0,575 L 75 x 50 128,763 L 80 x 40 50,345 L 80 x 65 3,248 L 90 x 90 0,775 L 60 x 40 1,913 L 55x 55 1,86 T 140 5,703 T 120 2,137 T 100 0,815 Steel billets
STEEL BILLETS 3SP AND 5SP ORIGIN : SAUDI ARABIA, QATAR, TANZANIA, INDIA, CHINA, MUSCAT Steel billets of various dimensions available. These are available in the following sizes (mm): 100X100 ; 120x120; 125x125; 130x130 ; 150x150S Standard : JIS G3141, ASTM A653, GB, Ghos 380, BS 4449, EN 10025
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
Supplier of construction steel, iron billets, steel billets, ore
Supplier: Steel rebars & billets
Services: Manufacturer
