Favorite Source Trading Limited

Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.

We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.

Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.

Chemical Composition: Al Weight: 20/25kg Al (Min): 99.7%-99.9% Place of Origin: UK Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Grade Chemical Composition % Impurities Si Fe Cu Ga Mg Zn Mn Others Sum Al99.9 0.50 0.07 0.005 0.02 0.01 0.025 -- 0.010 0.10 Al99.85 0.80 0.12 0.005 0.03 0.02 0.030 -- 0.015 0.15 Al99.7 0.10 0.20 0.010 0.03 0.02 0.030 -- 0.030 0.30 Al99.6 0.16 0.25 0.010 0.03 0.03 0.030 -- 0.030 0.40 Al99.5 0.22 0.30 0.020 0.03 0.05 0.050 -- 0.030 0.50 Al99.00 0.42 0.50 0.020 0.03 0.05 0.050 -- 0.050 1.00 25 kg specification: Product Name: Aluminum ingot for remelting (AL99.70) Dimensions: about 823*183*110 mm Weight: about 25 kg Bale weight: about 1050kg Each delivery unit (25 tons) : 23 bales Packing material: 0.9 x 32 mm steel strip, surface treated with anti-rust. "#" shape binding, binding firm. Execution standard: GB/T1196-2008 standard in the AL99.70 provisions The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00.