This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc ABS has excellent mechanical properties, excellent impact resistance and can be used at extremely low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads and speeds. ABS's creep resistance is greater than PSF and PC, but smaller than PA and POM. The flexural and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly influenced by temperature. ABS is flammable material and belongs to HB class according to UL94 standard. ABS burns quickly when ignited, and emits a lot of toxic gases and black smoke, which is not conducive to practical application. With the advancement of science and technology and improving the quality of life, everyone's safety awareness is getting stronger. The domestic and foreign countries have put in place strict fire and flame retardant requirements for plastic materials used in automobiles, construction, home appliances, office supplies, etc., and made corresponding technology. Standards and specifications, so research on ABS flame retardants has a very important meaning. MATERIAL: ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc CATEGORY: ABS TYPE: Regrind SPECIFICATION: Regrind Abs from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc. Qty per month 1 container 26 mt Origin: Bangladesh LOADING WEIGHT: 26 Ton FOB (USD/Ton): 750$ - 950$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
HIPS regrind black washed MATERIAL: HIPS regrind black washed CATEGORY: HIPS TYPE: Regrind Black SPECIFICATION: It is regrind washed from Home appliances. Impact is around 10. It is not flame retardant Origin: Korea - Buan LOADING WEIGHT: 25 Ton FOD (USD/Ton): 630$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
LDPE Lump Extrusion Plastic Scrap For Sales MATERIAL : LDPE Lump Extrusion CATEGORY : LDPE TYPE : Lump GRADE : Extrusion SPECIFICATION : "The main ingredient is LDPE and the secondary ingredient is LLDPE. The grade is extruded flame retardant grade Japanese customers make pellets by mixing them with pure LDPE Ratio is 9:1 MFI 2.5" ORIGIN : Japan LOADING WEIGHT : 22 Tons FOB (USD/Ton) : 250-400
Origin in Japan, Specification: hard PVC from pipe, no CPVC Shipment: at the beginning of next month Loading Weight: 25 Tons Price FOB: 340- 540 USD
PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material. MATERIAL: PPE regrind black CATEGORY: PPE TYPE: regrind GRADE: black SPECIFICATION: Grade V-0, engineering plastic Origin: Japan LOADING WEIGHT: 25 Ton FOB (USD/Ton): 900$ - 1000$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days PPE Plastic Provides: Good electrical insulation properties Long term dimensional stability Outstanding impact resistance Light-weight Heat resistance Good hydrolysis stability
POM Regrind from zipper Teeth, industry lump, industry runner Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts. One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc. MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner CATEGORY: POM TYPE: Regrind SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
XLPE Regrind Mixed Colors Plastic Scrap For Sales MATERIAL : XLPE Regrind Mixed Colors CATEGORY : XLPE TYPE : Regrind GRADE : Mixed SPECIFICATION : It is a floor heating plate made of xlpe. Single color black or yellow, or mixed colors. ORIGIN : Japan LOADING WEIGHT : 24 Tons FOB (USD/Ton): 200-400
PVC Pipe Regrind Grey Color Plastic Scrap SPECIFICATION : - no moulding and 100% from pipes scrap grey color - Strict manual sorting to separate unwanted and uncolor items - Having a drying machine which aims to maintain quality because if we use the heat of the sun it will make the PVC Regrind dirty and not bright - Washing techniques namely cold washed. - Caco3 is bellow 8% and K Value is 65 to 67 - Packing: Jumpo pag 1mt - currently stock around 10 mt and 28 mt on 20th February for grey color full pipes - filler content bellow 7% ORIGIN : Indonesia
