M&R Agency Ltd.

grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle

Item: Copper Wire Grade: C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000, C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70620, C71000,C71500,C71520,C71640,C72200,T1,T2,T3,etc Standard: JIS ASTM DIN EN ISO Diameter 0.1-5mm/custom Length custom Surface mill,polished,bright,mirror,hair line,brush,checkered,antique,sand blast,etc Application Building, industry etc Payment Terms 30% T/T in advance as deposit,70% balance against the B/L copy or 100% irrevocable L/C at sight Delivery time 5-15 days after receiving L/C or deposit Remark Specific requirement of alloy grade,temper or specification can be discussed at your request

R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants

Copper Wire Scrap, (Millberry Copper) 99% High Purity Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick,

Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale

Copper Wire Scrap We have been engrossed in manufacturing and supplying top notch range of Copper Wire Scrap. The offered scrap is processed and segregated by our deft professionals with the aid of pioneering techniques. This scrap is used for manufacturing of copper wires that is used in binding of electric motors. Additionally, the provided Copper Wire Scrap can be bought from us in various specification according to need of clients at pocket friendly rates. Product Description Chemical composition (%): Copper scrap Cu: Bi: Sb: As: Fe: Ni: Pb: Sn: S: O: Zn: P 99.95 0.002 0.002 0.002 0.0050. 0020. 0050. 0020. 0050. 0020. 0050. 001 Wire diameter: 2.5-3 mm Weight/spools: 3, 5, 7, 15, 20kg Tensile strength: 1000, 900, 500, 450N/mm2 Standard and purity of hot sale 99.9% purity copper wire scrap

GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Name: Copper wire scrap Purity (%): 99.99 Carbon: 0.03 Cobalt: 0.001 Iron: 0.005 Phosphorus: 0.01 Sulphur: 0.01 Zinc: 0.003

(Millberry) 99.78% at a purity of 99.78% min. 99.78%Max. COPPER: 99, 9% CARBON: 0.03% COBLET:

Material:Copper Wire Scrap Grade Purity:99.95%-99.99% Copper Wire Scrap Application:Electric Wire Copper Wire Scrap:Copper Wire Scrap 99.9% Purity Bulk Shape:99%/Metal Scrap Grade:Certificated High Pure Cu Wire Diameter:0.20mm 0.25mm 0.30mm Color:Bright Red Millberry Cu Content (%):99.95 - 99.99% Type: Copper Wire Place of Origin: CN;SHN Brand Name: SDLF Model Number: scrap copper Copper content: 99.95%-99.99%