Supplier : Pressurized solar thermal collector, non-pressurized solar thermal collector, compact pressurized solar water heater, compact non-pressurized solar water heater
Verification Status
Contact Details:
No.12 Guangdian Road
Haining
314415
Huangwan Town
China
1. The outer tank: Color Coated Steel, thickness 0.4mm.
2. The inner tank: SUS304/2B, thickness0.5mm.
3. The warm keeping layer: polyurethane foaming 55mm.
4. The bracket, Galvanized Steel, thickness 1.5mm
5. Vacuum tube: 47-1500 or 58-1800, Two layer.
6. Angel of bracket: as your need.
Tech data:
1. Inner water tank:stainless steel, sus304-2b, ss316l; thickness, 0.31-0.51mm.
2. Outer water tank:color steel or stainless steel;thickness, 0.40mm.
3. Insulation layer:polyurethane foam;thickness, 30-60mm.
4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement.
5. Vacuum tubes:aln/ain-ss/cu layer;47-1500 or 58-1800.
6. Tank capacity:70-400l.
7. Assistant tank heating element, mg rod, reflector and controller can be provided.
Characteristic:
1. Operated completely automatic if connect with intelligent controller.
2. Installed both on flat and inclined roof, and can be used with a electric booster (heating element) as to provide hot water without sunshine.
4. Suitable for camping area, holiday residences.
5. Stable and reliable performance, well wind resistance
1. Uni-directional heat transmission
2. Can start from lower temperature
3. Faster transmission
4. Lower heat capacity
5. Low temperature resistance
6. Freeze-proofing
7. High frequency soldering inner tank
8. Rating pressure is 0.6Mpaú¼0.4Mpa separately, can connect directly with the city water system
9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency,
10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes,
Scm
Products detail:
This is a split pressurized thermal collector, adopting vacuum tube heat pipe technology, is widely used for residential water heating, it's easy to install the tubes.
Daily output of each tube is more than 2.6 gal per day. In some southern states, this number can be expanded.
Service life of this collector can be 20 years plus.
More technology data of this product please feel free to find on the products section or you can download our catalog and get more details.
Manifold size 120*105 mm
Pipe diameter / thickness 35/0.8 mm
Interface 32 mm/ 3/4 inch
Material aluminum alloy
Heat pipe 14*70/8*1650 mm
Vacuum tube 58/1800*1.8 mm
Thermal material rock wool
Absorption 94%
Exchange efficiency 42%
Max flux 0.58l/s
Running pleasure 0.6 mpa
Max idle temp 270 degree c
Model number number of tubes absorber area daily output(131 degree f)
Scm15-58/1800 15 pcs 1.95 m2(20.99 ft2) 105-150 l(30-40 gal)
Scm20-58/1800 20 pcs 2.60 m2(27.99 ft2) 140-200 l(40-50 gal)
Non-Pressurized Solar Collector Solar Water Heater (60L 80L 100L 140L 160L 180L 240L 300L 400L 500L)
Specialty
1. Economical type for most of area, common people can afford it
2. Simple product structure: Solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid
3. Mature technology and stable operation
4. Higher efficiency on photo thermal conversion.
5. Accessory is popular and easy maintenance
Solar water heater Specifications:
1) Inner tank thickness of solar heater: 0.4mm, 360mm/370mm/380mm
2) Outer tank thickness of solar heater: 0.4mm, 460mm/470mm/480mm
3) Inner tank of solare water heater: SUS304 food grade stainless steel.
4) solar water heater Outer tank: Stainless steel, 0.4mm
5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L
6) Thickness of solar water heater bracket: 1.5mm
7) Glass vacuum tube of solar water heater: 58mm X 1800mm
Remark:
1. Solar heat storage tank diameter(mm): 460mm/480mm
2. Thickness, insulated(mm): 50mm
3. Vent connection(inch): 1/2''or /3/4''
4. Electric heater: 47mm 1500W, 3/4''
5. Water connection(inch): 1/2'' or 3/4''
6. Collector angle(degree): 25-45
Ke58s
Vacuum tube: 58x1800mm
Inner tank: stainless steel 304 2b food grade
Outer tank: aluminum galvanized sheet
Folded from mould with powder painting
Outer tank dia.460mm
Frame: aluminum with anti-oxidation treatment
Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3
Available sizes: 18, 20, 22, 24, 28, 30, 36
Tubes with capacity 135l up to 325l
Material and major element of solar water heater:
1. Inner water tank: sus304-2b stainless steel /0.5mm thick
2. Outer water tank: white plate /0.4mm thick
3. Bracket: sus430 stainless steel /1.2mm and 1.5mm thick
4.Solar vacuum tube:
A) size: 47 x 1, 500mm / 58 x 1, 800mm
B) qty: 15 /18 / 20 / 24 / 30 pcs
5.Temperature insulation layer;
5.5cm imported polyurethane, keep same temperature and high pressure foam
6.Tank diameter:460 mm
