Citronella oil 32% citronella oil In iron drum of 180 kgs net Flc 20'' of 80 drums
Natural cajeput oil In iron drum of 185 kgs net 5, 000kgs
Natural basil oil 83% methylchavicol min. In iron drum of 200kgs net Flc 20'' of 80 drums
Vietnamese natural camphor oil 40% camphor min. In iron drum of 180kg net 3, 000kgs
S&A compact laser chiller for visual orientation tour edge laser cutting machine A laser company buys S&A chiller CW-5000 to cool visual orientation tour edge laser cutting machine. S&A CW-5000 compact chiller with long working life and simple operation has high precision temperature control in laser systems. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in ±0.3â?? precision. Itâ??s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)
Supplier: Electronic and non-electronic laboratory equipment, testing devices, special maintenance and disinfection chemicals, niche technology-market products and commercial and industrial product and service solution lines, civilian defense product lines from select 3rd party (usikaupungen boat works-patrol boats, specialty boats, frontier guard, commercial utility boats), environics oy-mgd-1 gas detectors; finnish navy/patria vehicles-tuuli aircushion patrol vessel, mara-thermo element boards and advanced pre-fab, construction systems, medical
Services: Technical support and know-how, 3rd party training and product repair, handling, shipping, and applications
Outsatnding features for our giga press-tablet compression machine for high end production Advanced double sided high speed tableting machine for large batch production In compliance with cgmp guidelines Higher output up to 583, 200 tab/hr. (max) Excellent accessibility for quick cleaning Front controls Main motor & force feeder motor driven through acvfd Force feeder drive from bottom Improve tablet quality due to pre-compression system Hydraulic power pack system Auto lubrication Upper punch penetration Safety interlocking for upper guards Plc system (optional) Tablet press available in tooling. Overall dimension (l x w x h) (mm) 1640 x 1610 x 1990 Machine net weight (kgs) 4100.
Offering Clit Press- Double Rotary Tablet Compression Machine. Outstanding Features: • Clit Press is specially designed to compress DS, Capsules & Oval shaped tablets. • Force Feeder is provided to regulate uniform flow of large volume of granules at high speed. • Force Feeder is with variable speed to feed granules at desired rate • Standard feed frames can also supplied along with the machine (Optionally). This facility in compressing certain products where force flow feeders are not suitable. It can also be used as an alternative arrangement in case of breakdown of force Flow Feeders. • Unique clutch system to start & stop the machine to avoid abnormal load on the machine • Upper punch penetration system. This facilitates in setting of compression position in the Die. • Upper punches are covered with acrylic dust guards. • Machine is totally enclosed. This reduces the noise level and prevent to & fro flow of dust between compression zone and compression room. • Large paint free compression zone to meet GMP norms. Motor and gear box of feeders are fitted outside the compression zone on top of the machine, which also facilitates ease in maintenance. • Anti Vibration mountings provided, hence no foundation is required. • Top acrylic guards are interlocked to prevent the machine being operated when the guards are open for safety purpose. • Separate control panel. • Clit Press is double rotary tablet compression machine Tablet Press is available in 29 Station "D" Tooling,37 Station "B" Tooling & 45 Station "BB" Tooling
Pilot Press GMP Model Salient Features of Mini Tablet Press:- Available in "B" & "D" Tooling in both models. Single Rotary Tablet Compression Machine Turret speed up to 42 RPM Force feeder with A.C.V.F Drive (Pilot Press II only) A.C Inverter Drive for main motor Inbuilt pre-compressoin (Pilot Press-II only) Adjustable upper punch penetration (Pilot Press II only) Low noise level. User friendly access Operator safety through upper guard interlocking PLC system as an optional feature (Pilot Press II only) Central Driven Slotted Turret Fitted with Thrust Bearing Table top model for easy mobility Granules are fed through open Feed Frame which ensure easy setting and minimum wastage of material Adaptability to both gravity feeder and force feeder enhances its versatility Safety Features like MCB for overload protection and Limit Switch at Upper Guard Easy to operate, maintain and clean Machine is totally enclosed i.e. top half of the machine (Compression Zone) with acrylic covers and lower half of the machine complete with matt finish SS covers.This reduce the noise level and to and fro flows of dust between compression Zone and Machine zone. Optional Features for Mini Tablet Press SS 316 contact parts. Dyna Mount. Hence no foundation required IQ,OQ,DQ documents and test certificate provided on request 1.5 HP / 960 RPM / 3 Phase with three steps pulley Overall Dimension (L x B x H) (mm) 630 x 680 x 1210 Machine Net Weight (kgs)415.
