SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Supplier: Delta ac drives , delta ac servo motors and drives , human machine interface (hmi) , delta power sensor , delta gearbox , delta timer / counter / tachometer , delta power supplies , delta scada , delta temperature controller , delta programmable logic controller(plc) .
1. What is HID Xenon? HID lamp (High-Intensity-Discharge) is the top product of the Metal halide lamp .Unlike Halogen lamps, HID lamps don't have a filament but create light by the arc between two electrodes. There are distinctive metals contained in the arc tube: high-pressure Xenon (99.99%), mercury and metal halide. When starting voltage is applied to the electrodes from the ballast or igniter, an arc is formed between them. The arc activates the Xenon, which in turn ignites the metal halide. The result of this action is the emission of light energy. Due to the high pressures of HID lamp operation, these wavelengths are concentrated in the visible light spectrum. We can get the desired color temperature through changing the pressure of HID lamp or the proportion of the metal halide. 2. Outstanding Features: Super Brightness: The brightness and its luminous flux are increased by 300% as that of the halogen tungsten lamp, so that the lamp can radiate to higher, wider and farther place. Good color temperature: The color temperature is approximately 4300 K íºC10000k compared to 3000 K for halogen lamp. The common choose is 5500k,which is close to the sunlight and comfortable to our eyes, also benefit for the safe driving indirectly. Low power consumption and high efficiency: The power of Xenon metal halide lamp(35Watt,) for vehicle is only around half of tungsten halogen lamp but emitting 3 times of light. Quick start up: From starting up to reach full light, halogen lamp takes about 15 minutes, while HID lamp takes less than 0.001 second to start up and it can reach 85% of its full light in 1 second. For hot-re-strike, it takes several seconds to stabilization; for pulse-start ,it takes 10-20 seconds. Extremely long life: In practical terms, the life span of the bulb is equal to that of the car. Service life is at least 3000 hours, greatly above total hours of an automobile during normal night, which means that the bulb need only be replaced in exceptional cases. 3. Why we use HID Lamp? On the road, HID Xenon lighting systems appear as a bright white beam which resembles natural daylight. The bright white beam offers greater visibility and road safety. High efficiency make the requirement for cooling the lamp lower and can reduce the aging of the lamp chimney. Extremely long life make the HID lamp in proper condition without maintenance. The constant power and brightness in such a huge range of input voltage make HID lamp unparalleled. Quick start-up technique is the best solution for automobile lamp. 4. Easy Installation: This is a plug & play unit. Simply replace your factory bulbs with Our Xenon bulbs, plug the bulb to the ballast, and the ballast plugs to the factory OEM harness
Mi2 automobile LED headlights china automobile LED headlights automobile LED headlights Product parameters: 1. Voltage: DC12V 2. Power: one lamp 28w [56W * 2]; 3. Lumen value (brightness): 3000lm 4. Led Auto Headlights Lamp bead: imported LED lamp bead 5. Color temperature (color): 6500k 6. Service life: > 50000hrs (hour) Product Name: mi2 automobile LED headlamp Mini LED lamp highlight high and low beam H4Adjust the light type at will adjusting the LED light of the lamp body through the snap ring achieve the ideal light typeNo delay start socket installation plug and play intelligent power failure protection aluminum alloy rust and flame retardant no line no hole Our company's auto parts category mainly provides high quality led auto headlights, hid bulbs, LED Work Lights, LED daytime running lights and other products for professional production and processing. Click here for more information on auto parts.
Working voltage: 8 to 18V DC Working current: 3.4A; Input voltage: 12V DC; Output power:35W; Operation temperature:-40ípCí½+105ípC Lumen:3300 Lm; Color temperature:4200-8000K;Life:3000hr; 1. Super brightness: its luminous flux (3,300Lm) is more than 3 times as that of the halogen lamp (1000Lm) 2. long life-span: The halogen lamp can only last 400 hours continuously at most, while HID Xenon lamp's life-span is 3,000 hours, which is the same with the Automobile's life (the European standard). 3. Excellent power saving: Halogen lamp usually consumes about 55-65W electric power on average. But HID Xenon lamp only consumes 35W, which can draw less power from your vehicles electrical system and obviously improve the performance of the vehicles. 4. Brilliant colour tempreture: Compared to 3,000-4,200K for halogen lamp, The colour temperature of HID Xenon lamp is approximately 4,200-8,000K, wich is comfortable to our eyes, and also benefit for safe driving. 5. Reliable security: Sealed by advanced technology, HID Xenon lamp engages with the features of high intensity, waterproof, dustproof, shockproof. 6. Convenient installation: Only insert HID Xenon lamp into the original lamp hole, fix ballast and connect power supply. No need to alter any part of original vehicle. Product Certifications: Certificate Standard: ISO9001: 2000 Certificate Standard: E-mark 13 Package:neutral carton case Dimensions (L x W x H):47.5*33.5*34cm Base type:H1,H3,H6,H7,H9,H11,H13,9005,9006 Bi-xenon kits:H4,9004,9007 Flexible-xenon kits:H4,9004,9007 customized
Working voltage: 8 to 18V DC Working current: 3.4A; Input voltage: 12V DC; Output power:35W; Operation temperature:-40ípCí½+105ípC Lumen:3300 Lm; Color temperature:4200-8000K;Life:3000hr; 1. Super brightness: its luminous flux (3,300Lm) is more than 3 times as that of the halogen lamp (1000Lm) 2. long life-span: The halogen lamp can only last 400 hours continuously at most, while HID Xenon lamp's life-span is 3,000 hours, which is the same with the Automobile's life (the European standard). 3. Excellent power saving: Halogen lamp usually consumes about 55-65W electric power on average. But HID Xenon lamp only consumes 35W, which can draw less power from your vehicles electrical system and obviously improve the performance of the vehicles. 4. Brilliant colour tempreture: Compared to 3,000-4,200K for halogen lamp, The colour temperature of HID Xenon lamp is approximately 4,200-8,000K, wich is comfortable to our eyes, and also benefit for safe driving. 5. Reliable security: Sealed by advanced technology, HID Xenon lamp engages with the features of high intensity, waterproof, dustproof, shockproof. 6. Convenient installation: Only insert HID Xenon lamp into the original lamp hole, fix ballast and connect power supply. No need to alter any part of original vehicle. Kit contents: 1) 2pcs bulbs 2) 2pcs ballasts 3) 2pcs brackets 4) 1 pc User's manual 5) other necessary parts for installation Product Certifications: Certificate Standard: ISO9001: 2000 Certificate Standard: E-mark 13 Package:neutral carton case Dimensions (L x W x H):47.5*33.5*34cm Base type:H1,H3,H6,H7,H9,H11,H13,9005,9006 Bi-xenon kits:H4,9004,9007 Flexible-xenon kits:H4,9004,9007 color box,customized
SpecificationsHID KIT 1) CE ,Emakr approval 2) Low-temperature high-automatic protection function 3) Brightness enhanced three times HID KIT 1. The color temperature of HID range from 3000k to 30000k, satisfying different demands. 2. The important components that consist of ballast are all imported from Japan,Germany and America, it guarantee excellent quality of ballast. 3. A series of SBO product has been exported to more than 60 countries and areas with reliable quality. 4. The warranty is 12 month, and we offer maintaining and technical support service forever. 5. The compatibility of ballast and bulb has been strictly controlled ,so the function is outstanding and stable. 6. Our factory has passed ISO 9001 quality management system. 7. The ballast wiring is made of the silica gel material which is fireproof,anti-high temperature, anti-high voltage and anti-erode. 8. Utilizing inserting joint, easy to install, waterproof and dust proof. 9. Having the following protection: open circuit protection, short circuit protection, over voltage and less voltage protection , bulb abnormity protection, waterproof, dust proof and anti-jamming. It can apply to very adverse conditions. 10.Low starting current , only need 6.5 amps, in this case , it can lower down the starting power to extend the lifespan of bulbs and aging of wiring. 11.We are the one of first-class manufacturers in the market with superior quality and reasonable price. 12.The crust of ballast is made of aluminum alloy, small capacity, dispelling hot fast which guarantee the stability of ballast . 13.Our pursuit is to become the best enterprise at manufacturing and overseas export . 14.We can supply almost all the hid xenon lamps that apply to different models of automobile and motocyles. Available Model: H1,H3,H4,H7,H8,H9,H11,9005,9006,H13 etc.
Detailed Product Description General features Revolutionary HID Flashlight makes a bright white illumination even in the dark crevices. Compared with a halogen bulb, the HID Flashlight produces much brighter light beam but saves energy, and what`s more its usage life is prolonged. It's really like a stadium light! Output: 3700 lumens max of HID Xenon brightness. Focus is adjustable with changeable Intensity: (Two level: Full Brightness, 2/3 Brightness). Large lamp housing provides wider effective range. Cartridge-style, 11.1V 5200mAh Li-ion Rechargeable Battery pack can provide more than 140mins running time once, and it is easy to swap. Portability: carried by hand or strapped to a belt. Convenient recharging: AC charger and Car charger. Optional amber Filter for a more bright lightbeam in foggy environment. The entire unit is constructed with tough aluminium material. Water-proof design suitable for any terrain. Description These rugged new HID flashlight is capable of illuminating targets far away 1500m. The extremely bright light produced by X1 flashlight, The focused beam keeps more lumens per watt on your target than other high-power flashlights. The beam provides excellent peripheral vision at 1500m. The bulb can form the most bright point after turned on about 30 seconds, which is the HID great advantage. However, If you want to adjust the focus, it is better to do that after 10 seconds start-up. The effect will be nice and obvious to do so. Applications X1 is ideal for military, law enforcement, border patrol, fire departments, marine/coast guard, detector, police, rescuers, and other public and private security organizations. Furthermore, X1 is also ideal for recreational activities such as camping, hunting, night fishing, outdoor night game---hiking, aviation, boating in case of an emergency. Specifications Bulb type HID (High Intensity Discharge) Lamp Power 35W--28W Lumen 3400LM(at 5000K)/35w, 2750LM/28w Continual illuminate time 100min/35w, 140min/28w Bright color temperature 5000K(standard), 4300K, 6000K, 8000K, 10000K Irradiation distance í¦1.5 KM Bulb life span >3000hrs Light starting time í_ 0.4 second to start quick í_5 seconds to full brightness Optical efficiency max 100LM/W Reflector High Efficiency, Aluminium alloy Glass lens High-temp toughened quartz glass lens HID flashlight ballast input voltage 8~16V HID flashlight ballast working current 3.2A HID flashlight ballast starting current 8A max HID flashlight ballast output voltage 85V normal (23KV temporary starting-up max) Battery type SANYO ICR18650 Lithium Cell / 3X2 / 4400mAH Battery setup style Cartridge-style(enabling easy swap) Battery life span >500 times Battery pack weight 400Gí+20G Backup light 2X1W LED bulit in battery pack Dimension L: 370mm, Head:D81m, Torch: D46mm Material Aerospace-Grade Aluminium alloy (6061 T6) - Surface treatment Flat Black Type III Hard Anodized Finish Flashlight Color Silver or Black Head running temperature 80 max weight 840Gí+20G Battery AC charger input 100~240VAC 50/60Hz 0.8A max Battery charger output 12.6Ví+0.1V DC, 1.8A Charging time About 4 hrs Starting environment temperature 0 ~ +50 Working environment temperature -20 ~ +50 X1 HID flashlight Kit package includes: Part Name Quantity (pcs) HID Flashlight body 1 5200mAH high powered Lithium battery with emergency built in led 1 Indoor battery charger adaptor 1 portable car charger 1 amber filter 1 rear switch plastic protection cover 1 Flashlight belt clip 1 Battery protection cover 1 hand-held aluminium carrying box 1 Other accessories Dimension: L: 370mm, Head:D81m, Torch: D46mm weight:2.8KG Flashlight Color:Silver or Black
Package include 2 Digital Ballasts 2 Xenon Bulbs Zip ties 2 Heavy duty heat resistant double sided self-adhesive pads 2 Connector English manual guide Warranty Card (Required for warranty replacement) 1)Main parameters: Input Voltage Range: 8-32V DC(12v/24v) Operating Voltage: 13.2V DC Typical Cool staring current:
