Magnesium Sulphate Magnesium Oxide Manganese Sulphate Manganese Oxide Zinc Sulphate Zinc Oxide Feed Enzymes
Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :96.42% PH value :8.3 Chlorides Content :0.25% Sodium Sulfate Content :4.4% Addition Rates Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg. 25kg in PP woven bag lined with plastic film
Mn2: Index items standard value test results Ph value 7-9 8.9 Dry matter 92% 96 Lignosulphonate 50 55 Water insoluble matter 1.5% 0.7 Product description : Sodium lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high , adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc. Main performance: 1. Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2. Can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters. 3. Can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4.In the field of water-coal paste, the sodium lignosulphonate series products can be adopted as the main compound materials. 5.In agriculture, the sodium lignosulphonate series products can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs. Packing, storage & transportation: 1, packing: 25kg in pp woven bag lined with plastic film. 2, storage: kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same. 3, transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train. 25kg in pp woven bag lined with plastic film
Index items Standard value test results Ph value 4-7 5.1 Dry matter 92%min 94% Lignosulphonate 55%min 60% Water insoluble matter 1.0%max 0.42% Calcium lignosulphonate is a kind of natural anionic surface active agent processed with sulfurous acid pulping waste through advanced production technology. It can work well with other chemicals and produce early strength agent, slow setting agent, antifreeze and pumping agent . It is widely used in various concrete projects such preformed concrete, reinforced concrete and prestressed concrete, especially applicable for commercial concrete, anti-freezing concrete, waterproof concrete, bulk concrete, pumping concrete, with high economic benefit. Main performance: 1, can reduce 10% of water consumption at least 2, can improve mixture of the concrete; 3, compression strength improves by more than 15% equally on 3-28 days 4, have no function of corroding on the reinforcing bar. Operation methods : 1. 0.2-0.5% of mixing amount in concrete (with cement weight), users can adjust the mixing amount through the test 2. Can use after mixed liquid , also can put with cement , aggregate into mixer to use at the same time too, need lengthen time properly 3. The result is more obvious after mixing with high-efficient naphthalene department water-reducing agent. User can determine the suitable dosage according to the result that cement variety, aggregate situation, naphthalene department type of water-reducing agent are tested fixing; Packing, storage & transportation: 1, packing: 25kg in pp woven bag lined with plastic film. 2, storage: kept in dry and ventilating place, prevent from rain and moisture when storageif agglomerated, please crush and make it into solution, and its effect will be the same. 25kg in pp woven bag lined with plastic film
Hpmc used for construction materials production, like cement, wall putty, concrete, and other coatings. Hydroxy propyl methyl cellulose Cas no.:9004653 Appearance white or off-white powder Gel temperature(, æ) 58-65 /62-70 /70-90 Methoxy content(%) 28-30/ 27-29 /19-24 Hydroxyl propyl content(%) 7-12/ 4-7.5/ 4-12 Ph value 5.0-7.5 Particle size 80-100 Weight loss on drying(%) , ¨¹5.0% Ash content (calculated as sulphate)(%) , ¨¹1.5% 25kg/bag
Mn3: Index items standard value test results Ph value 8-10 8.3-8.5 Dry matter 92% 96 Lignosulphonate 50% 55 Water insoluble matter 1.0% 0.45 Product description Sodium lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high , adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc. Main performance 1. Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2.Can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters. 3. Can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4.In the field of water-coal paste, the sodium lignosulphonate series products can be adopted as the main compound materials. 5.In agriculture, the sodium lignosulphonate series products can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs. Packing, storage & transportation: 1packing: 25kg in pp woven bag lined with plastic film. 2 storage: kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same. 3 transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train. 25kg in pp woven bag lined with plastic film
1.property: Zinc phosphate is a new type of nontoxic and harmless white antirust pigment with excellent performance in rust prevention and ideal application effect. It is the best substitute of conventional antirust pigments containing heavy metals such as lead and chrome. 2.Usage: Zinc phosphate is widely used in various coating materials for preparation of waterproof, acid-resistant or corrosion preventive coating materials such as phenolic paint, epoxy paint, acrylic paint, paste paint and water-soluble resin paint in the fields of shipbuilding, automobile, industrial machinery, light metal, household appliances and metal containers for foods. 3.Specifications:The technical specifications are as follows in conformance to Standard Q/84XS01-2004. in composite paper bags25kg each,20MT/FCL' with pallet.
Cmc can be used in oil drilling industry with the following characteristics: It has high power for controlling water loss, and pac is an especially high effective filtrate volume controller. Good and tough mud cake will be formed. Having strong salt- and temperature-resistant properties, especially with pac. As a good non-newtonian fluid, it will effectively control the mud's rheological property.
We produce and export different grades of high-purity cmc.
Cmc can be used in oil drilling industry with the following characteristics: It has high power for controlling water loss, and pac is an especially high effective filtrate volume controller. Good and tough mud cake will be formed. Having strong salt- and temperature-resistant properties, especially with pac. As a good non-newtonian fluid, it will effectively control the mud's rheological property.
