Crs-200b common rail injector tester 1.Test cr injector 2.Windows operating system 3. Test 6 kinds parame 1. Pulse width: 0.1~20ms 2. Continuous injection times: 0~1000 3. Fuel temperature: 40¡¡§¡è2¡ãc 4. Rail high pressure: 0~1800 bar 5. Test oil filtered precision: 5|¡§¬ 6. Input power: 380v/50hz/3phase or 220v/60hz/3phase 7. Rotation speed: 0~3000rpm 8. Oil tank capacity:20l 9. Overall dimension(mm): 1180*770*1510 10. Weight: 300kg.
Cr-100c pump pressure tester Test bosch, siemens, delphi, denso pump and inejctor With flow meter sensor
Com-emc bosch fuel injection pump tester 1.Computer display 2.Test rpm, count, temperature, pressure, advance angle Com-emc bosch fuel injection pump tester >>>functions 1. Measurement of each cylinder¡¡¥s delivery at various rotation speeds; 2. Checking of each cylinder¡¡¥s injection time with static state; 3. Checking of the mechanical speed governors; 4. Checking of the electromagnetic valve of distributor pumps; 5. Checking of the pneumatic speed governors¡¡¥ positive pressure performance; 6. Checking of the pneumatic speed governor¡¡¥s vacuum performance; 7. Measurement of the reflux delivery of distributor pumps; 8. Measurement of the distributor pump¡¡¥s body internal pressure; 9. Checking of sealing of fuel injection pump body; 10. Measurement of the advance angle. >>>characteristics 1. Changing frequency changing rotation speed; 2. Low fall of rotation speed and high output torque; 3. High measurement precision; 4. The functions of over voltage, overload and short circuit protection; 5. Ten kinds of rotation speeds presetting; 6. Constant temperature controlled; 7. Ultra low noise; 8. Operating position: arbitrary side of the two work sides of the test stand; 9. Rotation speed, count, temperature, air pressure and advance angle are displayed on lcd; 10. Built-in air resource; 11. Data can be searched, printed(options). >>>technical parameters Adjustable rotation speed range 0~4000rpm Double series of graduates 45cc, 150cc Volume of oil tank 60l Temperature stabilization 40¡¨¤2¡ãc Test oil filtering unit 5|¨¬ Dc. Supply 12/24v Feed pressure 0~0.4mpa (low), 0~4mpa (high) Air pressure (mpa) 0~0.3 Rack travel range 0~25mm 3-phase power supply 380v/50hz or on request Flywheel inertia¡¡¥s moment 0.8kg¡¡èm2 Center height 125mm Output power 7.5kw, 11kw, 15kw, 18.5kw or on request Overall dimensions (mm) 2100¡¨¢960¡¨¢1750 Net weight (kg) 1000
Scv valve : Name: scv valve Brand: denso Made in japan Serial number: 294200-0650 Applicable: denso hp3 pump Scv valve : Name: scv valve Brand: denso Made in japan Serial number: 294200-0650 Applicable: denso hp3 pump
Com-a oil pump test bench 1.Digital display 2.Test count, rpm, temperature, air pressure, advance angle >>>technical parameters Adjustable rotation speed range 0~4000rpm Double series of graduates 45cc, 150cc Volume of oil tank 60l Temperature stabilization 40¡¨¤2¡ãc Test oil filtering unit 5|¨¬ Dc. Supply 12/24v Feed pressure 0~0.4mpa (low), 0~4mpa (high) Air pressure (mpa) -0.03~0.3 3-phase power supply 380v/50hz or on request Flywheel inertia¡¡¥s moment 0.8kg¡¡èm2 Center height 125mm Output power 7.5kw, 11kw, 15kw, 18.5kw or on request Overall dimensions (mm) 1800*960*1750 Net weight (kg) 900
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Supplier: Crude oil, cement, charcoal, flour, palm kernel oil, palm kernel seed, river sand, white beans, bitumen, turkey, parboiled rice, used car, motor oil, diesel
Supplier: Brass components ,brass precision part,brass cable glands, brass molding insert,brass stop plugs,brass ppr inserts,brass hardware, brass & metal nozzles,brass nipples, brass sanitary part,brass bush and brass products,brass anchors & fasteners, brass lock nut & check nuts & dome nuts, brass turned components,brass inserts, brass auto parts, brass threaded stud, brass forging components, brass forging metal turning parts, brass shower header wall bracket socket,brass electrical components,brass shower hinges pipe to glass connector,brass shower header clamp,brass knob,brass pipe bush,brass guide bush,brass parts,brass tuned components,brass and metal precision parts,brass,ms,ss elbow fitting,brass terminal box connector,brass tee,brass,ms,ss,aluminium stand off(spacers),brass&ms&aluminium &steel metal adapter,brass&ms & aluminium & steel precision turned components,brass & ms& aluminium & steel & metal nuts, bolts, washers, zinc (zamak,mazak) metal parts, brass & ms, ss, zinc, aluminium
Services: Manufacturer & exporter
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings. According to the application: 1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc. 2. changing the direction of the pipe: bends, bends. 3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe. 4. pipe fittings with additional piping branches: three links, four links. 5. pipe fittings for pipe sealing: gasket, raw material belt, thread hemp, flange blind plate, pipe plug, blind plate, head, welding plug. 6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc. According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings. Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
