Magnetic Writing and Drawing Board Material: ABS+ Magnet
Door Magnetic Catcher
Magnet materials: 1)ndfeb material(sintered and bonded) 2)hard ferrite(sr ferrite and ba ferrite) 3)smco(1:5 and 2:17) 4)alnico(casting and sintering) 5)rubber magnet 6)soft magnet(mn-zn and ni-zn) 7)injection magnet(ndfeb and ferrite) Surface treatment: 1)plating (ni, zn, cr, cu, a.) 2)coating(epoxy resin) 3)spray coating(epoxy resin) 1. Bonded ndfeb magnets 2. Sintered ndfeb magnets 3. Ferrites > sintered hard ferrite > soft ferrite-mnzn ferrite > soft ferrite-nizn ferrite 4.Smco magnets 5.Cast and sintered alnico magnets
Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35SH,N45SH,N30UH,N38EH Tolerance in size : +/-0.1 mm
nSintered NdFeB magnets (neodymium magnets) are the most powerful magnets with high coercive force and high energy. It is getting to replace the traditional magnets of hard ferrite, AlNiCo and SmCo in many fields, and have been widely applied to motors, wind generator, magnetic separator, speaker systems, transducer, MRI, auto industry, etc.
NdFeB Magnetic 51 x51 x 22 mm Weight 0.43 kg Nickel-plated (Ni-Cu-Ni) Magnetisation: N35 Strength: Approx. 215 Kg Extra strong (N35) magnets. These magnets are often used by model airplane builders. Heat resistant up to 80 degrees Celsius. NdFeB Magnetic mainly comprised of neodymium, iron and boron, is the third generation of the rare-earth permanent magnets, Sintered NdFeB is the strongest permanent magnets in the world up to date, It has excellent properties of high remanence, coercivity, and Max. Energy product. NdFeB Magnetic grade N35, N38, N40, N42, N45, N48, N50, N52(Max. Operational temperature: 80c) N33SH, N35SH, N38SH, N40SH, N42SH(Max. Operational temperature: 150c) N28UH, N30UH, N33UH, N35UH, N38UH(Max. Operational temperature: Up to 180c) N28EH, N30EH, N33EH, N35EH(Max. Operational temperature: Up to 200c) N30AH, N33AH, N35AH(Max. Operational temperature: Up to 230c) NdFeB Magnetic Outsanding product: 1). High performance: N52, N48M, 48SH, 42UH, 38EH, 33AH 2). High working temperature: The AH series with 40 k Oe super-high coervice force can replace SmCo magnets successfully. 3). High consistency: The cpk of Br and Hcj are much higher than 1.67 the consisitency of surface magnetic field and magnetic flux can be controlled with +/-1% 4). High Anti-corrosion: The sale spray test and humid heat test of the high anti-corrosion coating could be more than 1000 hours 5). Low weight loss PCT: 130c, humidity 100%, vapor pressure 2.7 bar. 20 days, average low weight loss less than 2 mg/cm2 NdFeB Magnetic applications: Loudspeakers, motor assemblies, windmill, Home appliance, acousics, communication equipment, toy, car, servomotor, step motor, DC motor and linear motor, mircrophones Pros: Very strong hold when contacting another magnet or plain iron, very difficult to pull away (easy to slide however). Pretty strong hold between two of these even with a couple of mm in between. Cons: Would like thicker (and more powerful) versions. Sure u can stack these together but sometimes it's not the same thing. Other Thoughts: Good for attaching thick stacks of paper to refrigerators etc or pinching together papers or textiles. Bottomline: This is the one if you need strong cost-effective magnets You are welcome to enquiry on our NdFeB Magnetic. NdFeB Magnetic 51 x51 x 22 mm Weight 0.43 kg Nickel-plated (Ni-Cu-Ni) Magnetisation: N35 Strength: Approx. 215 Kg.
We produce and sell ndfeb magnet in various shapes(segment, block, cube, cylinder, disc, ring, rod, sphere, etc)with different grade Rare earth magnet: 1. Material: neodymium, ndfeb 2. Technology: utilizes new sintered ndfeb magnet techniques and equipment such as strip casting, hddr technology 3. Magnetic properties: high coercive force, the max operation temp is up to 200 degree centigrade or 380 curie temperature 4. Grades: n33-n52, 33m-48m, 33h-48h, 30sh-45sh, 30uh-38uh and 30eh-35eh 5. Shapes and sizes: various kinds or according to customers' request 6. Coatings: ni, zn, phosphating, epoxy and so on 7. Motor magnet applications: widely used in different applications, such as sensors, motors, rotors, wind turbines/wind generators, loudspeakers, magnetic hooks, magnetic holder, filters automobiles and so on. With insulation packing with metal sheet .
such as stripcasting, hddrtechnology; 9. Applications: sensors, motors, rotors, wind turbine, wind generators, speakers, loudspeakers, magnetic hooks, magnetic holder, filters, etc. When inquiring, following information offered will be much appreciated . 1.Type of magnet (material & grade) 2. Quantity (annual and per shipment) 3. Shape and dimensions (drawing if necessary) 4. Direction of magnetization 5. Magnetized or not 6. Details of surface treatment 7. Application if possible 8. Other information or requirements Carton or according to your requirement
1. Materials:sintered neodymium-iron-boron; 2.grades:n35-n52; n35m-n50m; n35h-n48h, n35sh-n45sh; n30uh-n40uh, n30eh-n38eh. Our advantage 1) free samples 2) all industrial shaped magnets available 3) do as per your drawings 4)100% factory direct price Note: oem service, high quality, fast delivery, best after-sale service Carton, according to your requirement
