Red Garnet/ Garnet Abrasives have uses such as sand blasting media, water jet cutting, hole drilling & lapping, and making coated or bonded abrasive tools. We provide Garnet Mesh: 10/20, 20/40, 30/60, 40/60, 60/90, 90/120, 120/180, 180/240, 20/25, 25/30, 30/35, 35/40, 40/45, 45/50, 50/60, 60/70, and 70/80.
White fused alumina for abrasive and refractory belongs to the group of electro-corundum. It is produced by controlled melting of alumina in an electric arc furnace. White fused alumina is iron-free, ultra pure and extremely hard. White fused alumina is produced by fusing calcined alumina in an electric arc furnace under carefully controlled conditions. The material produced is white in color, dense and has predominantly large crystals of alpha alumina. Ingots are crushed, ground, and precision screened in our new sizing plant to obtain very consistent sized fractions. Magnetic iron from crushing is removed by rare earth magnets to ensure very low levels of iron in the finished products. Close sized fractions are available or precision blended to specification. This process ensures a very consistent sizing from coarse to fines which is critical in many applications. White aluminum oxide has white color and a little higher hardness and toughness comparing with the brown one. The grinding tools made of this material are suitable for fine grinding of high carbon steel, high-speed steel and stainless steel, abrasive powder of finer grit size, can also be used for precision casting and high-grade refractory.
With high toughness, black aluminum oxide is extremely suitable for polishing stainless steel and non-ferrous metals. It `s grinding efficiency is much higher than that of brown a/o and the finishing effect is much better than many of other abrasive materials. Special requirement on chemical composition can be satisfied through discussion.
Sanding cloth specifications: Backing:high density cotton or polyester cloth Bond:synthetic resin as adhesive Abrasive:aluminum oxide, silicon carbide, zirconium Material:aluminum oxide, silicon carbide, zirconium Grain:aluminum oxide, silicon carbide, zirconium Grit:p40-400
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
Chopsaw wheel for Metal & Steels 41A3003025 300*3*25.4 12x1/8x7/8 41A3503025 350*3*25.4 14x1/8x7/8 41A4003025 400*3*25.4 16x1/8x7/8