Epoxy floor coatings are typically comprised of two main components, resins and hardeners. When these two component are mixed together during the epoxy floor coating application process, a chemical reaction begins. This chemical reaction turns the epoxy floor coatings into tough, rigid, and plastic-like materials, which are very durable, waterproof, and chemically resistant. Coz available in a variety of colors and styles, many commercial or industrial or industrial facility are use this coating to create a durable and attractive flooring surface, to make the original floor more functional. Topu epoxy floor system are generally consists of three parts, primer, second and top coat. Through grinding or mending the origin concrete floor, smooth uneven surfaces and remove dirt, oil, and other debris from concrete floors. We use the primer to repair the ground, smooth and improve the adhesion ability; then use second coat to increase solid degree of the whole system, and the topcoat give out the appearance of optional color, and covering the entire system to create a durable and attractive flooring surface.
A kind of FRP epoxy flooring material, which has the properties of excellent wear resistance,excellent chemical resistance,excellent stain resistance,excellent overall structure,long life of 10-15 years,small volatile harmful gases,small affecting production and low maintenance rate. Standard export packing
Supplier: Gypsum products, gypsum board, ceiling tiles, suspended ceiling, flooring tiles, all kinds furniture, shoes, generators, cement, biscuits, chocolates, jeans, t shirts, sweatshirts
Supplier: Spices, car spare parts, textile, fittings, fruit & vegetables, machinery, medical equipments, electrical fitting, electrical modules, seimens, scneihder electric, abb, ge pipe fittings, pipes, steel, metal bars, plastics, copper, aluminium, footwear, glass, glassware, carpets, flooring materials, felt sheets woven, (pool cloths)watch equipments, construction equipment, rubber bee belt, bearings skf
Services: Clearing agent , transportation , shipping , courier , packaging
High-Quality Waterborne Epoxy Floor Coating Product Description: CM-101 Waterborne epoxy is a two-component curing coating at room temperature. Component A is a waterborne epoxy curing agent, and component B is epoxy resin. Product Functions: ï?? Enclose the ground to improve adhesion and prevent dust emission. Application Areas: ï?? Floor painting in the workshop ï?? Factories ï?? Supermarket Advantages of the Product: ï?? Greater durability and performance. ï?? More tolerant of petroleum contaminates in a concrete surface, making it ideal for garages and parking structures. ï?? Glossier finish. Technical Parameters: State in container No hard lumps after mixing. Density, g/ml 1.05 Surface Drying Time,â?¤ 60 mins Complete Drying Time,â?¤ 7.5 hrs Adhesion,â?¤ Level 0 Proportion (Weight) Component A: Component B=3:1 Construction Reference: ï?? Roller Coating is Recommended. ï?? Before construction, component A and component B should be mixed according to 15:5 (weight ratio). After fully mixing, the construction should be carried out. ï?? The construction shall be carried out in the surface temperature above 10â?? ï?? With the use of a coating, the mixed coating should be used up within 30 minutes. ï?? The second coating should be carried out after the lower layer is completely dried. The recommended interval is 12 hrs.
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Flooring Solutions Tiles, Marbles, epoxy or PU flooring for parking areas and common areas
Epoxy Floor Coating (interior Floor Coat) Covered/underground Car Park/garage Warehouse Coatings Factory/food Plant Coating Industrial Floor Coating Self Levelling Floor Coat Hygienic Coating (anti-bacterial)
Supplier: Pvc Waterstop, Polythene Sheets, Crystallization Systems, Cementitious Systems, Liquid Membrane Systems, Sheet Membrane Systems, Epoxy Systems, Flooring System, Grouting System, Mortar, Water Repellen, Curing Compound, Water Plug, Waterproofing Products, Waterproofing Chemicals, Construction Chemicals, Acrylic.
Buyer: Waterproofing Products
