KT11S Type open hole drill is based on developing and producing DTH drills for many years, according to the demand of large open-pit mine, and is an elaborate design new drilling equipment. The Drill walking forward, turning and angle adjustment and other movements adopts hydraulic driven. With the impact of high wind pressure screw and pneumatic impactor, it have high drilling productivity. Equipped with hydraulic dry dust collector to collect dust collection can reduce the pollution to the environment. Also with the hydraulic manipulator and drill pipe library , floating coupling to protect the drill screw, only one person can dismantle the pipe. The air conditioning cab to provide a comfortable working environment, automatic control valve to reduce the card stuck drill chance. Drill car has a high degree of automation, energy efficient, comfortable environmental protection, easy to operate, flexible and adjustable, and safe driving etc. characteristics.
1.Safe and stable traveling system: Low gravity, great ground clearance, make cars easily make drill through rugged road. High-power motor drive and strong climbing ability, with great traction. 2.Powerful and reliable engine: Adopt famous four cylinder engine as the power, large power and small volume make the whole equipment have small vibration and working stable. Adopy the patent diesel air suction system (patent No. 200820087606.3 ) and three-level desert air filter, enhanced the adaptability to the wicked environment and prolonged the longevity of the diesel. 3.Mew type boom: The scope adjustable sysytem and rotundity boom with optimization design have novelty structure and adjust easy, make the drill hole scope larger and also can drill low level hole
Description: 1. SZ200 crawler-type multi-well drilling rig is lightweight, efficient, multi-purpose drilling equipment, which can use air, foam or mud rotary for percussive drilling according to different textures. 2. It is widely used in industrial and agricultural water conservancy projects, such as drilling wells, testing wells or other exploration boreholes, particular, in drilling hole for geothermal heating. 3. It can also meet the requirements in other construction project such as reinforcement of engineering basis ,drilling with casing in loose gravel and drilling foundation rock.
The draw works is driven by two VFD AC motors with 1+1r/2+2r step-less speed, and reversal will be realized by ac motor reversal. The mud pump is driven by VFD AC motors, which are mounted on the rear skid of mud pump, with v-belt transmission and simple structure. The independent driven rotary table runs with 1+1r/2+2r step-less speed, and reversal will be realized by ac motor reversal. Using AC-DC-AC drive technology, rotary table and draw works are four quadrant running and full digital vector control. Single drum, gear driven and one / two shifts smooth speed change draw works is simple in structure and reliable in operation. Feed back / dynamic brake is adopted to replace eddy current brake as auxiliary brake. Automatic drilling is obtained by draw works main motor or an independent motor. Intellectual position control for traveling block prevents crown block and rotary table from collision. Real time communication and network is available by using profibus technology. K type mast is suitable for install top drive system. Sling shot or swing up substructure and mast are applied so that all the equipment can be installed at lower position. Suit for any transportation.
Description: 1. SLY500 truck mounted water well drilling rig is designed by our engineers.It is a kind of truck mounted and rotary drilling rig. 2. This rig is a rotary drilling rig with directional circulation,which is equipped with mud pump,It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit. 3. The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients.
Two (2) sets of diesel engines and allison transmissions. Mature double engine compound box and drive system. 118/125ft(36/38m) mast with stiffened rectangular pipes. 14íß8 reinforced chassis with good cross-country capacity. 5.5/6m foldable substructure and dog house. Top drive system is available. Main parameters Drilling depth(4-1/2"dp) ft(m): 9840(3000) Workover depth(3-1/2"dp) ft(m): 21325(6500) Max.Hook load lb(kn): 381260(1700) Drill line dia., in.(mm)/lines: ª)1-1/8(ª)29)/8 Max.Hook speed ft/s(m/s): 4.46(1.36) Overall dimensions in shipping status ft(m) 69.7íß10.8íß14.67(21.25íß3.3íß4.47) Weight lb(kg) 167548(76000) According to customer's request
1.Zj40/2250db ac drilling rig is suitable for the exploration of petroleum and gas wells with a depth of 2000-3200m by 127mm drilling rod, or a depth of 2500-4000m by 114mm drilling rod. 2.Ac-dc-ac drive system. 3. Single shaft drawwork, drum notch. Hydraulic disc type brake is adopted as the main, while energy-losing brake or etn brake is adopted as the auxiliary. 4.The rotary table adopts independent drive. 5.Parallelogram seat realizes the low-level installation of table-board equipments and derrick, then rises them up by right of drawwork. 6.The main mechanical components of drilling rig follow the standard of api with marks According to customer's request
Supplier: Drilling rig equipment
1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance. 2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine Drilling diameter (mm) ¸47 Drilling depth (m) 300 (¸43 aluminum alloy drilling pipe) 240(¸43 steel drill pipe) Power 37kw (motor) Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
We could supply you drilling rigs and accessories with competitive p5ice and good quality within short time. Containers
