1. Product Introduction Electric ball valve compare with the same sized gate valve and globe valve, it can all-closed and all-open when it rotate 90 degree. Valve channels diameter is equal with connection pipes diameter, so the medium can flow past without any leakage. Ball valve is a very important kind of valve, and widely used in the field of petrochemical industry and long-distance transport pipes. Its closure member is a part of globe with hole, and rotate along with valve rod to achieve open and close of valve. 2. Performance Feature 1. Apply to the occasion need two-position cut off and regulating. 2. Electric ball valve can achieve the medium cut-off and circulation functions in the transport pipeline of the petroleum industry, chemical industry paper making, metallurgy, sewage treatment and oil tank truck these fields. 3. High sealing performance and flow capacity, easy to assemble and maintain, small flow resistance, reliable seal. 4. Electric valve has the advantage such as small volume, light weight, large thrust, strong function, easy to operating, high reliability, and installed servo amplifier. 5. Can flow to any position, has wide adjustable range, and it can used for high pressure and big diameter occasion and to control the medium with high viscosity, fiber and fine particle. 6. Directly mounted type, with servo amplifier installed inside. Controlling and operating by output and input 4-20mA signal and 3800VAC voltage. It has the advantage such as easy to link, compact structure, stable and reliable operation.
Power supply:220v, 380v Input signal: Switching valve:4-20ma Feedback:4-20ma Control accuracy:1%, 2.5% Turning angle:0-90. We have forty years producion experience specialized in all kinds of valves and electric actuators.Our products are sold to all the provinces of demestic and exported to Europe and America,Southeast Asia,Middle East.Now we would like to expand business worldwide,so we will provide products with the most favorable price,the best quality and the most professional service! Our products with advanced technology and high quality cover thousand of models of ten series,could meet different customers' various requirement. 1.Electric control valve series 1.1 Electriccontrol globe valve series 1.2 Electric control butterfly valve series 1.3 Electric controll ball valve series 1.4 Electric control gate valve series 2.Electric actuator series 2.1 Electric actuator AS,B+RS,A+Z,B+Z,MD series 2.2 Electric actuator 3610,3410 series 2.3 Quarter-turn electric actuator DKJ series 2.4 Linear-turn electric actuator DKZ series 3.Manual-operated butterfly valve series 3.1 Manual-operated wafer butterfly valve series 3.2 Manual-operated flanged concentric butterfly valve series We are manufacture as per customer's requirements including material,size,dimension,pressure and standard. High-quality plywood.
1. Product Introduction Electric ball valve compare with the same sized gate valve and globe valve, it can all-closed and all-open when it rotate 90 degree. Valve channels diameter is equal with connection pipes diameter, so the medium can flow past without any leakage. Ball valve is a very important kind of valve, and widely used in the field of petrochemical industry and long-distance transport pipes. Its closure member is a part of globe with hole, and rotate along with valve rod to achieve open and close of valve. 2. Performance Feature 1. Apply to the occasion need two-position cut off and regulating. 2. Electric ball valve can achieve the medium cut-off and circulation functions in the transport pipeline of the petroleum industry, chemical industry paper making, metallurgy, sewage treatment and oil tank truck these fields. 3. High sealing performance and flow capacity, easy to assemble and maintain, small flow resistance, reliable seal. 4. Electric valve has the advantage such as small volume, light weight, large thrust, strong function, easy to operating, high reliability, and installed servo amplifier. 5. Can flow to any position, has wide adjustable range, and it can used for high pressure and big diameter occasion and to control the medium with high viscosity, fiber and fine particle. 6. Directly mounted type, with servo amplifier installed inside. Controlling and operating by output and input 4-20mA signal and 3800VAC voltage. It has the advantage such as easy to link, compact structure, stable and reliable operation.
Explosion-proof electric ball valve overview: The electric explosion-proof ball valve is mainly composed of an explosion-proof actuator and a ball valve. It is an electric explosion-proof valve used in flammable and explosive conditions. The electrical components on the explosion-proof electric ball valve are required to be fire-proof and anti-static, and all meet the explosion-proof standards. The explosion-proof grade is ExdIIBT4 (CT6), and the protection grade is IP87. The electric explosion-proof ball valve can control the valve switch by inputting the relevant power signal, and can control the operation of the ball valve by inputting the 4-20mA signal and 220/power supply for proportional adjustment, so as to achieve the automatic control of the medium flow, pressure, temperature and other parameters in the pipeline. Applied to explosion-proof occasions such as natural gas, sewage, gas, coal mine, chemical industry, etc. EXDIICT4 grade explosion-proof electric ball valve Explosion-proof electric ball valve features: Explosion-proof Shendong modified valve means that the curved heat actuator of the ball valve h meets the explosion-proof standard. It is used in places requiring explosion-proof, such as liquid or gas (inflammable and explosive places in the chemical industry, used to open and close the valve. Or section, explosion-proof valves can be divided into intrinsically safe type and explosion-proof type. The intrinsically safe type uses a DC motor, and the explosion-proof type uses an AC motor. control, and can also be operated on site. Electric explosion-proof ball valve standard specification: 1. Design and manufacture: GB12237-89, API608, API 6D, JPI7S-48, BS5351, DIN3357. 2. Flange size: JB/T74~90 (JB74~90), GB9112~9131, HGJ44~76, SH3406, ANSI B16.5, JIS B2212~2214, NF E29-211, DIN2543. 3. Structure length: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202. 4. Inspection main test: JB/T9092, API598.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipe. In the cylindrical channel of the butterfly valve body, the disc shaped butterfly plate rotates around the axis with a rotation angle of 0 �°~90 �°. When the rotation angle reaches 90 �°, the valve is fully open. The butterfly valve is simple in structure, small in volume and light in weight, and only consists of a few parts. Moreover, the valve can be quickly opened and closed only by rotating 90 �°, which is simple to operate. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two sealing types: elastic seal and metal seal. For elastic sealing valves, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. The valve with metal seal is generally longer than the valve with elastic seal, but it is difficult to achieve complete sealing. The metal seal can adapt to higher working temperature, while the elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used for flow control, the main thing is to correctly select the size and type of the valve. The structure principle of butterfly valve is especially suitable for making large diameter valves. Butterfly valves are not only widely used in petroleum, gas, chemical industry, water treatment and other general industries, but also used in the cooling water system of thermal power plants. There are two kinds of butterfly valves commonly used: wafer type butterfly valve and flange type butterfly valve. Wafer type butterfly valve uses stud bolts to connect the valve between two pipe flanges. Flange type butterfly valve has flanges on the valve, and bolts are used to connect the flanges on both ends of the valve to the pipe flanges.
Overview of electric high platform ball valve: The electric high platform ball valve adopts a high platform design, which can be directly installed with the actuator without the need for a bracket, which provides convenience for product installation and replacement, and has the characteristics of small flow resistance and large flow capacity. The difference between the electric high platform ball valve and the ordinary ball valve with bracket is that it occupies a small space and has a compact structure. The disadvantage is that it is not resistant to high temperature, and the temperature is transmitted to the cylinder, and the rubber ring in the cylinder is easy to age. Although the ordinary ball valve and the actuator need to be installed with a bracket and a connecting shaft, the heat dissipation function is stronger. Usually, the pipeline with a high temperature usually adopts a ball valve with a bracket, which can avoid damage to the actuator due to high temperature and prolong the service life. service life. Electric high platform ball valve features: 1. It adopts high platform ISO5211 standard design, and it can be connected and installed with the actuator without other brackets and connecting shafts. 2. It adopts silica sol precision casting, beautiful appearance, tight and reliable, good sealing performance and wide application range. 3. Anti-static function, a spring is set between the ball, valve stem and valve body, which can discharge the static electricity generated during the switching process. 4. The fluid resistance is small. The full-bore ball valve basically has no flow resistance, and the opening and closing is rapid. It only needs to rotate 90�° from fully open to fully closed, and it is easy to operate. The electric high platform flanged ball valve adopts the spring plunger type electrostatic lead-out device, so that the direct form of static passage between the ball and the valve body or the form of static passage between the ball and the valve body through the stem tube, so that the ball and the valve seat can be The static electricity generated by friction during the switching process is led to the earth through the valve body, preventing fire or explosion that may be caused by static sparks. Static electricity is an objective natural phenomenon, which can be produced in many ways, such as contact and friction. For example, for high platform ball valves, when the ball rubs against the soft-sealed switch, static electricity will be generated. If the pipeline is filled with flammable and explosive media, it is very dangerous. Therefore, a connecting device is installed in the valve to guide the static electricity of the ball to the outside to prevent static electricity. is very important.
Overview of electric three-piece ball valve: The electric three-piece ball valve (electric internal thread ball valve) is assembled from three parts: the left and right valve casings and the middle valve body. Four longer bolts traverse the three-section valve casing, and tightly clamp the middle valve body from both ends. The biggest advantage of the electric three-piece ball valve is that it is particularly easy to disassemble. When the valve fails or needs to be repaired, it is not necessary to disassemble the thread of the pipeline, but the four-piece ball valve can be taken off directly, and the body part can be taken out. It not only reduces the probability of failure, but also improves the working efficiency. It is especially suitable for working conditions with small mechanical volume and narrow space. Electric three-piece ball valve principle: The three-piece electric ball valve has reliable sealing performance and high pressure. Its action principle is to drive the valve core to rotate 90 degrees through the power supply voltage of the electric actuator to open and cut off the medium. It can be designed as The two-position switch control of the medium can also realize the proportional adjustment of the medium flow, pressure, temperature and other parameters in the pipeline. Electric three-piece ball valve standard specification: Test inspection: API598, EN12266 Threaded end: ASME B1.20, BS21 DIN2999/259, BSP ISO7/1, ISO228/1 JIS B 0203 Butt weld ends: ASME B16025 Sleeve Welding Ends: ASME B16.11 Flange connection: ASME B16.5 DIN2542~2545 JIS B2238 Classification and difference of electric chip ball valve: The movable one-piece ball valve is one-piece, and the ball is fixed by a plug, which facilitates its maintenance and can be used in working conditions that require quick opening and quick closing. The electric two-piece ball valve is composed of two parts, which are fixed by two pieces of valve bodies clamping the ball. The maintenance is relatively complicated. The tightness of the middle screw is related to whether there will be air leakage, The electric three-piece ball valve is similar to the two-piece ball valve. It consists of left and right end covers and a middle valve body, and then enters the sheep clamp with necks on both sides. Its pressure is higher than that of the other two types.
Description  Rating :        PN1.0-32.0Mpa  JIS 10K/20K; ANSICLASS 150-900  Size  :         DN6-900 ,flange JIS /DIN 15A~200A ,BSP NPS NPT BSPT and etc 1/4~36  Components  :    two-pieces,one pieces,three pieces  Valve ends  :     flanged connections;threaded joint/screw thread(internal and external thread);socket weld.  Body  :         WCB , CF8, CF3,CF3M,CF8M SUS304/304L/316L/316/316L/Ti  Ball  :             SUS 316/304  Stem  :           SUS 316/304  Seat  :            PTFE, R-PTFE, PPL, PEEK  Related standards : ASME B16.34 , API 608 API 598, JIS B2003 Applicable temperature:-196~430 Drive Modes:Manual,gear worm,penumatic ,electric,hydraulic motor,pneumatic-hydraulic motor and electric-hydraulic Applicable medium:water,gas,oil ,acetic acid,nitric acid,Oxidizing medium,and etc. Ball Valve Factory:Qingdao HY Valves Co.,Ltd.
Body: WCB SS304/316/316L Ball core: SS304/316/316L Nominal pressure: PN16, PN25 and PN40 Connection: thread Seal: PTFE and PPL (special, graphite and metal rigidity seals) Fluid temperatures: C33: -30 to 150C (PTFE) C6: -30 to 250C (PPL) C7: -30 to 350C (metal hard seal) Electric: Voltages: 220 to 380V AC Ambient temperatures: -30 to 70C Protection level: IP67 Option for electric style: Ex-proof: dII BT3/T4 Signal feedback: Mechanical passive Active signal Warmer: dry internal element of actuator in dampness Operating handle: electrical actuator can be switch by hand Regulating style: 4 to 20mA signal input Pneumatic: Cylinder options: P series, Canada Puretorq and Italy air Cylinder types: double action single action Ambient temperatures: -20 to 80C Pressure: double action: 4 to 8 bars Single action: 5 to 8 bars Optional: Limit switch: remote switch signal feedback Solenoid valve: 5/2 for double and 3/2 for single action Triplicate: voltage stabilization, filter, cylinder and lubricant Hand wheel: switch valve by wheel Standards: Design: GB/T 12237-1989 Flanged: GB 9113.1 (JB, ANSI and JIS) Structure length: GB/T 12221-1989 Detection and experiment: GB/T 13927-1992. Carton/wooden box.
