Welding Machine
Product name 62S Plus Fusion Splicer Model No. 62S Plus+ WITH CT-08 Dimensions 46 W x 159 D x 150 H (mm) Cladding Diameter 80 to 150 microm Power Supply 100 to 240 V AC Wind Protection Maximum wind velocity of 15 m/s (34 mph) Weight 2.5 Kg Coating Diameter 100 to 1000 microm Fiber Cleave Length 5 to 16 mm Splicing Modes 100 preset and user programmable modes Product Keywords Traditional Core Alignment with the 62S+ Fiber Splicer
Carbon Steel Steel Flux Cored Arc Welding E71T-1 E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties. AWS Specification: AWS A5.20 AWS Classification: E71T-1 Typical Applications: • Buff and fillet welding of hulls and storage tanks • Structural steel • Farm machinery • Construction equipment • General carbon steel fabrication Welding Current: DCEP (Electrode Positive, Reverse Polarity) Typical Wire Chemistry: 100% CO2 75%Ar/25%CO2 C: 0.05 0.05 Si: 0.56 0.64 Mn: 1.39 1.61 P: 0.008 0.005 S: 0.014 0.01 Welding Positions: All Positions Typical Mechanical Properties (As Welded): Typical Mechanical Properties (As Welded) : 100% CO2 75%Ar/25%CO2 Yield Strength, Mpa: 480 470 Tensile Strength, Mpa : 570-690 560-690 % Elongation: 25.8 26.5 Available Diameters: 0.8mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm Available Spools: plastic spool and metal basket Available Weight per Unit: 0.9kg, 1kg, 5kg 15kg. In standard export packing or on customer requirements.
Product Description Thickness - 0.8mm & 1.2 mm Weight - 12.5 kg & 15 kg Grade - CO2 (ER 70 S6) We offer superior quality CO2 Welding Wire, which are widely used for diverse purposes across the industries. These wires are available in layer winding on plastic spools. Features: Durable Superior quality Conductivity to high temperature High efficacy
Product Description Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm Trade Name: ER50-6 Standard:GB/T 8110 AWS A5.18 ER70S-6 The CO2 mig welding wire manufactured by our company can be applied for all-position welding and it can adapt to the larger electric current range,besides it has many advantages,high arc stability while welding,less spatter,beautiful welding line shape,high deposition rate.Our products are at the leading level in our county in many aspects such as appearance,usability,welding machinery performance and so on. Applications: For welding of steel structure in mineral machineries,ships,brides,pressure vessels,building constructions,welding of other 500MPa level carbon steel and low alloy steel and high-speed welding of light gauge plate and pipe line steel. Advantages 1, Stable arc and less spatter while welding 2, Beautiful welding line shape 3, High deposition effciency 4, Excellent welding and operating properties
Advanced technologies with advanced equipment. Gas-shielded welding wires utilize co2, argon-rich gas and argon gas as the shielding gases with high production efficiency.Large current may be used during welding to achieve droplet transfer, wiht large melting coefficient of wire, excellent depth of welding penetration on material, little melting residues, high-density current, concentrated heat, small heating area, little distortion of work pieces after welding, etc. Because of low content of hydrogen in the seam, cold cracking is rare. Good visibility of electric arc facilitates full-position welding and welding at other positions. Main applications:welding of various 500mpa structural steel components;welding of various 500mpa plates and pipes;full-position welding with a wide range of current. 5kgs, 15kgs, 20kgs per spool, then on pallets. 2) 100kgs/250kgs per barrel.
Shandong zander sourcing company limited 1.Gas-shielded mig welding wire er70s-6 2.Raw material: 5.5mm qing steel 3.Size: 0.6mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm 4.Applicable for weld of low carton steel and low alloy steel structure, suchasships, vehicles, bridges, engineering machinery, pressure vessel and construction etc. 5. Lead time: 10days for 25to(20ft container) after cofirming order 0.8mmx15kgs 1.0mmx15kgs 1.2mmx15kgs
Quantity Per Roll 15 kg Tensile Strength 500-620Mpa Elongation 24-30% Size 0.80-1.2 mm Brand Fourmax
Product Description Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm Trade Name: ER50-6 Standard:GB/T 8110 AWS A5.18 ER70S-6 The CO2 mig welding wire manufactured by our company can be applied for all-position welding and it can adapt to the larger electric current range,besides it has many advantages,high arc stability while welding,less spatter,beautiful welding line shape,high deposition rate.Our products are at the leading level in our county in many aspects such as appearance,usability,welding machinery performance and so on. Applications: For welding of steel structure in mineral machineries,ships,brides,pressure vessels,building constructions,welding of other 500MPa level carbon steel and low alloy steel and high-speed welding of light gauge plate and pipe line steel. Advantages 1, Stable arc and less spatter while welding 2, Beautiful welding line shape 3, High deposition effciency 4, Excellent welding and operating properties
