Sodium Chloride (NaCl), an ionic compound, is the major reason for salinity of sea water. Evaporation of sea water and mining of salt halite`s are the two major methods used, in the mass production of common salt. Sodium Chloride, as a chemical intermediate, is used in the production of a variety of chemicals. Industries, using this property of Sodium Chloride, are Chlor-alkali industry and Soda ash industry. Apart from the above mentioned end user applications, it is also used in medicine, pharmaceutical, food and agriculture industries. Further, different grades of sodium chloride are produced to support its vast end users. NaCl % 92.00 93.22 Water % 6.00 4.50 Water insoluble substance % 0.40 0.18 Ca Mg g/100g 0.60 0.45 SO4 g/100g 1.00 0.78
Lithium chloride cas 7447-41-8 Basic information Product Name: Lithium chloride CAS: 7447-41-8 MF: LiCl MW: 42.39 EINECS: 231-212-3 Application Fluxes for welding and soldering techniques; salt bath for heat-treatment by low temperature and for dip brazing; raw material for other lithium compounds; tracer for chemical products (denaturation of wine etc.); absorption and desinfection reagent (lithium chloride solution) for absorbers Our Services 1.Prompt reply and instant communication are available. 2. Free samples can be transmitted. 3. Quality products with competitive price can be provided. 4. Any customized packing can be provided. We accept third party inspection. Specification LiCL 99.5% Li2CO3 150ppm SO4 50ppm Na 1000ppm K 200ppm Ba 200ppm Ca 70ppm Fe + AI 10ppm Insolubles 30ppm H2O 0.5%
Chinese name alumina aluminium oxide alumina Chemical formula Al Molecular weight 101.96 CAS login number 1344-28-1 EINECS entry number 215-691-6 Melting point 2054�ºC Boiling point 2980 â?? Water soluble insoluble in water, soluble in strong alkali and acid Density 3.5g /cm�³ White amorphous powder on the outside It should be used as analytical reagent, adsorbent, etc Alumina is a stable oxide of aluminum, the chemical formula is Al2O3. It is also known as bauxite in mining, ceramics and materials science. Properties: white solid insoluble in water, odorless, tasteless, extremely hard, easy to absorb moisture without deliquination (burned without hygroscopic). Alumina is a typical amphoteric oxide (corundum is �±-shaped and belongs to the most dense hexagonal packing, is an inert compound, slightly soluble in acid and alkali corrosion resistance [1]), soluble in inorganic acid and alkaline solutions, almost insoluble in water and non-polar organic solvents; Relative density ( Storage: Keep sealed and dry. Uses: Used as analytical reagent, dehydration of organic solvent, adsorbent, organic reaction catalyst, abrasive, polishing agent, raw material for smelting aluminum, refractory
Calcium Hypochlorite for disinfection of water ITEM CAL-HYPO 65%min CAL-HYPO 70%min Available Chlorine % 65min 70min Water % 5.5-10 5.5-10 Granule Size (14-50mesh)% 90min 90min Calcium hypochlorite exists as a white granular powder and has the formula of Ca(OCl)2. It has a strong scent of chlorine but is more stable than chlorine. It exists as both anhydrous and hydrated forms, giving a basic aqueous solution. The basicity of the solution arises from the hydrolysis reaction, where calcium hypochlorite is broken down into hypochlorous acid and calcium hydroxide. The basicity outweighs the acidity property since calcium hydroxide is a strong base and hypochlorous acid is a weak acid. Calcium hypochlorite is a good chlorine derivative and can release chlorine upon reactions. Calcium hypochlorite can react with carbon dioxide to form calcium carbonate, releasing dichloride monoxide. Similarly, calcium hypochlorite can also react with hydrochloric acid to form calcium chloride, water and gaseous chlorineIt is a solid substitute for liquid sodium hypochlorite for water treatment and bleaching. Calcium hypochlorite is a versatile chemical that finds its application in various industries. Some of its major applications are: 1. Deodorant: Calcium hypochlorite is used as a deodorant due to its strong oxidizing properties. It can react with the odor-causing compounds and neutralize them, thereby eliminating the foul smell. 2. Oxidizing agent: Calcium hypochlorite is a potent oxidizing agent and finds its use in various chemical reactions. It can oxidize a wide range of organic compounds, including alcohols, aldehydes, and ketones. 3. Bleaching agent: Calcium hypochlorite is commonly used as a bleaching agent in the textile and paper industries. It can remove the color from the fibers and make them white. 4. Swimming pool sanitation: Calcium hypochlorite is widely used for swimming pool sanitation. It can effectively kill the bacteria and other microorganisms present in the water and keep it clean and safe for swimming. 5. Water treatment: Calcium hypochlorite is used to disinfect drinking water and other industrial water sources. It can kill the harmful pathogens and make the water safe for consumption. 6. Bathroom cleaners and laundry detergents: Calcium hypochlorite is used in various cleaning products, such as bathroom cleaners and laundry detergents, due to its strong oxidizing properties. It can remove the tough stains and dirt from the surfaces and fabrics. 7. Haloform reaction: Calcium hypochlorite plays an important role in the haloform reaction to prepare chloroform. In this reaction, it reacts with acetone or ethanol to produce chloroform. In summary, calcium hypochlorite is a useful chemical with a wide range of applications in various industries. Its strong oxidizing and disinfecting properties make it a popular choice for water treatment, sanitation, and cleaning products.
Lithium metaborate (LiBO2) is a chemical compound. The chemical formula LiBO2. Molecular weight 49.75. A colorless trisoclinal crystal with a pearly luster. Melting point 845 C, relative density 1.39741.7. Dissolve in water. Decomposition begins above 1200 C. Lithium oxide is formed. The octahydrate is a colorless tripartite crystal with a melting point of 47 C and a relative density of 1.3814.9. Preparation method: It can be made from stoichiometric lithium carbonate and boric acid melting. Purpose: To make ceramic materials. Product Name Best Price LITHIUM METABORATE / Boricacidlithiumsalt / CAS 13453-69-5 CAS NO. 13453-69-5 Appearance White Powder Purity 99% Melting Point 845 C Density 1,4 g/cm3 Storage Store at +5C to +30C Application Intermediates; Biochemical reagent; Chemical raw materials Usage LITHIUM METABORATE is used in pharmaceutical industry and preparation of acid resistant enamels. Appearance and properties: white crystal or powder Density: 1,4 g/cm3 Melting point: 845 C(lit.) Stability: Stable. Application It is used in the pharmaceutical industry and in the preparation of acid-resistant enamels 1). For the pharmaceutical industry and the preparation of acid-resistant enamel 2). 99% is used as a flux in the glass or ceramics production industry. 99.9% is used as an additive for the production of lithium-based greases. LiBO2 % 99.9 min Al % 0.005 max Ca % 0.01 max Fe % 0.005 max Na % 0.01max P % 0.005max Si % 0.01 max LOI(500C/1h) % 2.0 max Bulk Density g/cm3 0.3-0.6
Product Description Appearance and features white tetragonal crystal molecular weight 23.95 pH(1mol/L) 14 Solubility Soluble in water, slightly soluble in ethanol melting point 471.2�ºC molecular formula LiOHChemical properties It is easy to absorb carbon dioxide and moisture in the air, but the absorption capacity is slightly worse than that of NaOH and KOH. Lithium hydroxide has the general property of alkali, and the following reactions can occur. 1. alkaline reaction It can make purple litmus test solution blue and colorless phenolphthalein to turn red; and its concentrated solution can denature phenolphthalein after experimental verification, so that the solution changes from red to colorless (similar to concentrated NaOH). 2. neutralized with acid HCl+LiOH=LiCl+H2O 3. Reacts with acidic oxides 2LiOH+CO2=Li2CO3+H2O (this reaction is used to absorb carbon dioxide in aerospace) 4. Reacts with metal salt solutions FeCl3+3LiOH=Fe(OH)3â??+3LiCl Usage Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis. The additive of alkaline battery electrolyte can increase the electric capacity by 12% to 15% and increase the service life by 2 to 3 times. It can be used as an absorbent for carbon dioxide and can purify the air in submarines. The chemical equation is: 2LiOH(s)+CO2(g)=Li2CO3(s)+H2O(l). It is used to make lithium salt and lithium-based grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc.; used in petroleum, chemical industry, light industry, nuclear industry, etc. When used in alkaline batteries, the aluminum content is not more than 0.06%, and the lead content is not more than 0.01%. It is used as an analytical reagent, a photographic developer, and also in the manufacture of lithium; it is used as a raw material for the preparation of lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries.
Best price sodium sulphate 99% cas 7757-82-6 Sodium sulphate powder Product Name Best price sodium sulphate 99% cas 7757-82-6 Sodium sulphate powder Appearance White power CAS 7757-82-6 Molecular Formula Na2SO4 Purity 99% Keywords Sodium sulphate,sodium sulphate 99%,Sodium sulphate powder Storage Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Shelf Life 24 Months What is sodium sulphate? Sodium sulfate, also known as sulfate of soda, is the inorganic compound with formula Na2SO4 as well as several related hydrates. All forms are white solids that are highly soluble in water. With an annual production of 6 million tonnes, the decahydrate is a major commodity chemical product. It is mainly used for the manufacture of detergents and in the kraft process of paper pulping. Function of sodium sulphate Used as materials for synthetic detergent, glass, papermaking, inorganic salts, dyestuff, alcohol fibre, tanning, metal smelting, surface treatment and filler industries etc. Application of sodium sulphate Sodium sulfate Anhydrous is consumed in four major categories; powder detergents as a processing aid and as a filler, wood pulp processing for making kraft paper, textile dyeing processes as a levelling agent to penetrate evenly, and molten glass process to remove small air bubbles. In addition,it is usually used for sodium sulfide , sodium silicate and other chemical products ,synthetic fibers,leather,nonferrous ,metallurgy,enamel and soap etc
2-Aminopyrimidine CAS: 109-12-6 Chemical formula: C4H5N Density 1.3± 0.1g /cm3 Boiling point 148.0�±23.0 �°C at 760 mmHg Melting point 122-126 �°C(lit.) Molecular formula C4H5N3 Molecular weight 95.10 Flash point 43.3�±22.6 �°C Accurate mass 95.048347 PSA 51.80000 LogP minus 0.89 Appearance Properties Beige to light yellow crystalline powder Vapor pressure 4.3�±0.3 mmHg at 25�°C Refractive index 1.632 Storage condition Store in a cool, ventilated warehouse. Keep away from fire and heat. Should be stored separately from oxidizer, do not mix storage. Equipped with the corresponding variety and quantity of fire equipment. The storage area should be equipped with leak emergency treatment equipment and suitable containment materials. stability Avoid contact with strong oxidants. 2-Aminopyrimidine is an organic compound with the formula C4H5N3. It is white crystal, weakly alkaline, soluble in water, alcohol and some organic solvents. 2-aminopyrimidine is widely used in medicine. It is used as a drug intermediate to synthesize a range of biologically active compounds, such as anti-tuberculosis drugs. In addition, it can also be used to manufacture dyes, rubber flame retardants, pesticides and so on.
Factory Price High Purity Niobium Oxide Powder with CAS No 1313-96-8 Niobium pentoxide is an inorganic compound with the chemical formula Nb2O5. It is a colorless insoluble solid and is very inert. It turns yellow when heated. It is the main predecessor of all niobium materials, and its main application is alloys, but other professional applications include capacitors, lithium niobate and optical glass. Niobium oxide Basic information Product Name: Niobium oxide CAS: 1313-96-8 MF: Nb2O5 MW: 265.81 EINECS: 215-213-6 Niobium oxide Chemical Properties Melting point 1520 �°C density 4.47 g/mL at 25 �°C(lit.) form Powder color White to off-white Specific Gravity 4.6 Water Solubility insoluble Merck 146,559 Stability: Stable. InChIKey ZKATWMILCYLAPD-UHFFFAOYSA-N CAS DataBase Reference 1313-96-8(CAS DataBase Reference) NIST Chemistry Reference Diniobium pentaoxide(1313-96-8) EPA Substance Registry System Niobium oxide (Nb2O5) (1313-96-8) Appearance and properties: pale powder solid Density: 4.47 g/mL at 25 C(lit.) Melting point: 1520 C Refractive index: 1.7 Stability: Stable. application It is used as raw material for producing niobium metal and also used in optical glass and electronic industry.
