We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Antimony Ore, Barite Ore, Bentonite, Clay, Copper Ore, Feldspar, Fly Ash, GypsumIron Ore, Lead Ore, Magnetite Iron Ore, Mica, Mineral Powder, Other Ores & Minerals, Phosphate Rock, Quartz Products, Slag, Talc, Tin Ore, Zeolite, Zircon Ore, Asbestos , Bauxite & Aluminium Ore, Chrome Ore, Coltan Tantalite Ore, Dolomite, Fluorspar , Graphite, Hematite Iron Ore, Kaolin, Lithium Ore, Manganese Ore, Mica Products, Nickel Ore, Perlite, Quartz, Silica Sand , Sulphur Ore, Tantalum Ore, Tungsten Ore, Zinc Ore , Zirconium, Copper Rods , Copper Tubes
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are exporter of Calcined Alumina. According to different requirements, five series of products have been formed, including dry pressing, hot die casting, refractory, casting and setting, structural ceramic granulator, etc. It can be widely used in electronic equipment, structural ceramics, refractories, wear-resistant materials, polishing materials and other industries.
We are supplier and exporter of Hematite Powder. Hematite Powder is a mineral, coloured black to steel. It is mined as a main of iron ore and used as a weighting agent in oil drilling. It is the mineral form of iron(III) oxide (Fe2O3). Fluids weighted with API Hematite Powder contain fewer solids by volume than, making higher mud fluids possible. API Grade Hematite Powder is applicable in all types of drilling fluids, including freshwater, seawater and oil-base muds. It is used as a density increasing product, used as a weighting agent and in the paint industry. Hematite is also a harder mineral than Barite so it is more resistant to particle size degradation. High Density Hematite Powder API Grade -SG = 5.19 - 5.47 -Fe2O3 = 96.70% -Fe = 71.82% -SiO2 = 0.89% -Mesh Size (passing at 98%) = 325
Tumi Ishi (pronounced Too-me Ee-she) are wood balancing blocks that are are meant to resemble stones. With so many different shapes and sizes, they are fun to hold and stack. These blocks make a great unique gift for that hard to shop for person. These also make beautiful and classy decorative pieces. Put them in a glass dish, stack them on your dining room table, coffee table, or desk.