We at BDMG, provide PTFE Teflon Tapes for electric insulation purpose or for release film. PTFE Tapes are available in any required width 6 mm to 150 mm and in any required thickness 0.003 to 0.025 inch as per the customer needs.
PTFE (Teflon) Coated Fiberglass Fabrics - Crease & Tear Resistant
A conveyor belt is a looped belt that is driven by and wrapped around one or more pulleys. It is powered by an electric motor and supported by a metal plate bed or rollers upon which the conveyor belt rests. The pulley that powers a conveyor belt is referred to as the drive pulley and has an unpowered idler pulley.
PTFE Teflon Coated Fiberglass Cloth Without Release Paper Product Description PTFE cloth tapes are produced with either silicone or acrylic pressure sensitive adhesive system. The silicone adhesive coated products have a continuous operating temperature range between while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of The PFTE coating provides optimal release, dimensional stability and outstanding heat resistance. PTFE cloth tapes have low friction and function well as electrical insulation. Bocheng PTFE Glass Cloth Futures: High temperature resistance Surface smooth, non-stick and easy to clean. Fire retardant. Excellent dimensional stability and high strength. High insulation, anti-ultraviolet, anti-static. Resistant to chemical corrosion, strong acid, alkali and various organic solvents. Easy to use, long service life. Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Common width for little tapes: 13mm 19mm 25mm 38mm 50mm, with color box, with opp bag For other width, customizaiton is available, but the waste should be taken into considertaion. Color: Brown, Black or White. Application of PTFE Adhesive Tapes High temperature roller coating, heating plate and de-moulding fixture. Food, medicine and plastic bag heat seal. Liner pasting for sliding chute, hopper and aviation mould, can also be applied in the cylinder of slurry machine, thermal plastic & de-moulding, and other industries, which is reusable and easy to replace. Applicable to other surface treatment which need to be resistant to adhesion, corrosion and high temperature. Used in packaging, thermoplastic, composite, heat sealing, electronic and electrical industries.
Heat Sealing Tape Teflon All size Available all time in stock
Teflon tape is a polymer material made of polytetrafluoroethylene as the main raw material. It has excellent high temperature resistance, corrosion resistance, insulation, wear resistance and non-stick properties. Teflon tape can be used in environments with temperatures ranging from -70 to 260�°C. It has good non-stickiness, excellent chemical inertia, and can withstand corrosion from a large number of chemical substances. Suitable for food processing, packaging, electronics, chemical industry, machinery and other industries.
High Temperature Fiberglass Woven Tape PTFE coated fiberglass fabric takes high quality imported glass fiber as weaving material. The basic material is weaved specially into senior glass fiber cloth substrate. After unique technology such as full immersion, impregnation, coating the cloth with PTFE, different thickness and width of Teflon cloth is finally produced. PTFE Fabric Description Common thickness: 0.08mm 0.12mm 0.13mm 0.15mm 0.18mm 0.25mm 0.3mm We couls supply at most 1.5mm fabric. Common width: 1 meter or 1.25 meter For other width, customization is available as well. Features of PTFE Fabric: 1. High-temperature resistance(-100 to 550). 2. Non-sticky and easy to clean. 3. Food grade and nontoxic. 4. Heat resistance and fireproof. 5. Resistant to chemical corrosion, strong acid and alkali. 6. Good dimensional stability, high strength, and has good mechanical properties. 7. Low friction coefficient (0.05-0.1), the best choice for oil-free self-lubrication. 8. Light transmittance up to 6% 13 %. 9. High insulation property (the value of dielectric constant is only 2.6, and the value of tangent is less than 0.0025). 10. Anti-static and Ultraviolet-proof. Application of PTFE Fabric: 1. Packaging machines. 2. Bag making machines. 3. Heat print machines. 4. Somewhere else where the heat resistance and non-stick are needed.
PTFE Teflon Tape1. Low density 0.2g/cm3 PTFE Teflon Tape is ideal for systems with water,drinking water and compressed air. Max. pipe diameter: 3/4". Temperature resistant from -200C to +80 C. Max. pressure: 10 bar.2. Miduim density 0.35g/cm3 PTFE Teflon Tape is ideal for systems with drinking water and air. Max. pipe diameter: 3/4". Temperature resistant from -200C to +100C. Max. pressure: 20 bar.3. Miduim density 0.6g/cm3 PTFE Teflon Tape is Ideal for steam. Economical in use. Pipe diameter: 3/4 - 2. Recommended temperature range from -200C to +160C.4. Density 0.7g/cm3 PTFE Teflon Tape is ideal for steam. In addition, ideal for most chemicals, acids, bases, solvents, etc. Max. pipe diameter: 11/4". Max. pressure: 30 bar. Also useful for hydraulics. Temperature resistant from -200 C to +180 C.5. High density 1.0g/cm3 PTFE Teflon Tape is approved for gas and drinking water and is ideal for hydraulics. Temperature is resistant from -200 to +260.6. Density 1.1g/cm3 PTFE Teflon Tape is for systems where requirements for quality and safety have high priority. It is very strong and economical in use. It is less suitable for fine thread. Temperature resistant from -200 to +260. 7. Density 1.3g/cm3 PTFE Teflon Tape is Ideal for use in situations where there are high requirements for e.g. acid-resistance, pressure or heat. This product is very diffusion-proof and is therefore highly suitable for oil, petrol and diesel. APPROVED for gas and drinking water (EN 751-3 and DIN 30660). Otherwise same use as for other high-density tapes. Temperature resistant from -200 C to +260 C.1.Different colors could be offered. And we could produce 200000 rolls per day. So the quantity and quality could be guaranteed.2.PTFE Tape is packed with carton case and OEM is available3.We put your order into our tight production schedule, ensure your punctual delivery time.Q: How to know the quality of ptfe thread seal tape A: In general, the quality of ptfe tape depends on the toughness and the color. Higher the toughness and purer the color, better the quality.Q: How about your packing A:Our general packing is 10pcs/shrink,250pcs/inner box,500pcs or 1000pcs/cartonIf you have your own packing,we can make it based on your requirement.FUJIAN BLEA SEA INDUSTRIAL CO.,LTD is specialized in manufacturing faucet,angle valve,plumbing hose,floor drain,drainer,ptfe thread seal tape and other sanitary ware productions.Now we have 2 factories with more than 200 employees,covering an area of 20,000 square meter construction area.our market is in Europe,Middle East, Eastern Europe,South America,Southeast Asia,South Asia,North Africa and other countries and area.
PTFE Packing With Chemical Resistance And Low Friction CoefficienT PTFE packing or Teflon packing is a braided packing made of high purity PTFE (poly tetrafluoroethylene) yarn without soaking any PTFE dispersion and lubrication. PTFE packing is a kind of self-lubricating, chemical inert, non-toxic and non-hazardous material. In addition, PTFE is called "king of plastic" and causes no pollution to the medium or liquid. More importantly, PTFE is known for its outstanding resistance to chemical attack, low friction coefficient, low water absorption and wide temperature tolerance (including cryogenic applications). Due to the above advantages, PTFE packing is widely used in chemical processing, food processing and pharmacy. COMMON SPECIFICATION Maximum Temperature 280 °C Pressure Rotating 1.5 MPa Reciprocating 10 MPa Valve 15 MPa Velocity 5 m/s pH 0 to 14 Density 1.41.6 g/cm3 Size Code (inch) 1/8 1/5 1/4 1/3 3/8 4/9 1/2 5/9 5/8 3/4 7/8 1 Cross Section (mm) 3 5 6.5 8 9.5 11 12.5 14 16 19 22 25 FEATURES Long lasting performance. Good flexibility and compressibility. Tough interlock braid. Superior chemical resistance. Resistant to the impact of water, steam, oil, fuel, solvent, acid and alkali. Low friction. APPLICATIONS PTFE packing is ideal for general valve and pump (including rotating, centrifugal and reciprocating pump) applications in chemical processing, food processing, cryogenic applications, industrial gas processing and hospital. White PTFE packing is applied in the valve. PTFE packing for valve
