Henan Shibo Mechanical Engineering Co., Ltd.

Supplier: Urea 46%, frozen chicken, frozen beef, sugar icumsa 45, soybean, yellow corn, maize, npk for agriculture, zeolite, kaolin, silica, feldspar, silicate sodium glue, lamination based water glue

Dehong jaw crusher series are based on years experience and technology development. The continuous improvement and refinement has made them the preferred jaw crusher for professionals and our customers. They can meet most crushing requirements in primary and secondary crushing, and the largest compression resistance of the material is 320mpa. This series are widely used in stone mining, metallurgical, construction, smelting, hydraulic and chemical industries, etc.

The jaw crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with comprehensive strength less than 320 MPa.

Stone hammer crusher application: this series of stone hammer is applicable crushing of brittle minerals, such as coal, salt, plaster, alum, brick, tile and limestone with compression strength no more than 100mpa and humidity no more than 15%. Pc hammer crusher introduction:this series of machine broke materials through the high-speed rotating hammer body and collision the material surface, it has a simple structure, large crushing ratio, high production efficiency and other characteristics, it can be used for dry and wet two forms crushing, it applies to mining, cement, coal, metallurgy, building materials, roads, fire and other departments chronology medium hardness and brittle materials. The device can change material particle size and adjust gap of article grate in accordance with user requirements, so it can meet different users Structural characteristics: stone hammer crusher has compact frame, reasonable layout, easy installation, good maintainability, simple operation. Particularly, it excellently adapts the layout of cement production process, save the space of process layout. With special structural characteristics, that is having big materials ratio etc. Stone hammer crusher is divided into ordinary hammer crusher and ring hammer crusher respectively. Ring hammer crusher generally used in coal, coke and other industries. Ordinary hammer general english prefix is expressed by pc, used pch english prefix that usually is ring hammer crusher.

Introduction: Cone crusher is suitable for crushing all kinds of ores and rocks above medium hardness. It has the features of reliable structure, high productivity, easy adjustment and economical operation etc. It is widely used in metallurgy, architecture, rock making, chemistry and silicate industry for crushing various mid-hard and hard ores and rocks. The spring system acts as an overload protection system that allows iron to pass through the crushing chamber without damaging the crusher. It uses consistent grease or water for sealing, which separates crushed particles and lubricating oil, and ensures reliable work. The types of crushing chamber depend upon the usage of the final products. The standard type is applied to medium crushing; the medium type is fit for medium and fine crushing and the short head type is fit for fine crushing. Main Features:We supply a wide range of Cone Crushers, for various secondary and tertiary crushing applications, therefore to insure the best and most feasible Cone Crusher type, fit for different plant configurations, designed for the most efficient and economical production and rock down sizing application. Our Cone Crushers are supplied in four general categories, designed for various types of secondary or tertiary applications, both for closed circuit and open circuit configuration: 1.Coarse type application. 2. Fine or medium type crushing. 3. Short head design.4. Super short head for fine crushing application. 5. Continuous Lubrication: This type of crushers are supplied with high capacity external mounted lubrication unit, composed of oil-tank, oil filtering system, high oil temperature shut-down, low oil flow shut-downs and oil flow gauge, which is designed to supply continuous and stable oil, by forced lubrication to the Cone Crusher, for smooth rotation and operation.  Cone Crushers are configured with many safety features. The lubricating unit is interlocked with the main motor, in order to provide additional safety, which includes oil filtration and automatic shut-down in the event of high oil temperature, as well as low oil flow. Crushers are configured with Spring-Loaded release system, which allows any inscrutable material to pass through the crusher, without causing damage to the crusher. The locking system (manual or hydraulic), will easily secure the crushing clearance. All models are configured with proven spring-type mechanism, in order to recover Tramp-Iron and provide protection to the unit. Applications :Cone crusher is a kind of crushing machine commonly used in mining, metallurgical industry, construction, road construction and chemical industry. Our cone crusher can be used to crush hard and medium hard minerals, rocks, iron ores, limestone, copper ores, quartz, granite, sandstones, etc.

PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material. Application: Metallurgy, construction material, mine, beneficiation and large block material crushing. Our advantages: 1. Large feeding port and high crushing cavity, suitable to crushing the material with high hardness and big grain size, and less powder. 2. The gap between impact plate and hammer plate is adjustable, so the discharging grain size can be effective control and the grain shape is well. 3. The hammer, impact plate and lining plate are made of new type abrasion-proof material with long working life and impact protection, wear protection. 4. Because of the function of three-stage crushing and plastic, so the crushing ratio is high, and the product shape is cube and can optional crushing. 5. The multi-function hydraulic station has many function of hydraulic discharge gap with high speed, impact plate stable vibration and the body open automatically. The PF series impact crusher is mainly compose of the rack, driving system, rotor, hammer and impact plate etc. The main feature including: 1.Rack: It composed by two parts of upper and lower with connection by bolt. All the parts contact the crushed material in the rack have set replaceable lining plate. 2. Driving System: The main shaft and rotor are driving by motor through belt then doing the high speed rotary motion. 3. Rotor: It adopts entire cast steel structure with high mass force, solid and durable, convenient to install the hammer. 4. Impact Plate: It is made from new type abrasion material and hanging freely inside the equipment. One end connect with the two sides of the rack through hanging shaft hinge, another end is bearing in the upper rack cone gasket through stay bolt which is adopt a sphere gasket, it can prevent the equipment damage by non-crushing material when crushing material. 5. Hammer: It is made from new type abrasion material and fixed on the rotor through wedge block

PF Impact crusher is the most advanced crushing machine combining domestic stone&sand industry specific situation, and it absorbs latest technology. It adopts advanced production technique and unique structure design, final product shape would be cube, max input size of material should be 500mm, compressive strength should be less than 350MPa, all kinds of coarse, medium, and fine size material(granite, limestone and concrete) could be processed. Impact crusher is widely applied in mining, railroad, highway, energy, cement, chemical, construction industries. Final size of material could be adjusted, double chamber and triple chamber types are available, unique structure adopt key-less connection, high chrome hammer, and special impact plate; crushing process is simplified, making it more energy-efficient; Cube final product shape,and adjustable discharge size.

Place of origin: china (mainland) Model number: pf1010 Application: ore Feature: 1.Stable operation, suitable for crushing hard rock with high efficiency and low consumption. 2.All parts are made of wearable material which can extend the lifetime of this machine. 3. Product is cubic shape, high density, adjustable discharge size, simplified crushing process 20gp/40gp/40hq container