Pressure: the standard cylinder had two kinds of pressure levels for E and G. E-class applied to pressure more than 6.3 Mpa ~ 16Mpa of the hydraulic cylinders (E-cylinder).G class applied to pressure more than >16Mpa~25Mpa of the hydraulic cylinders (G-cylinder).
2). Seal: E-cylinder used simple structure, good wear resistance,
3). Dustproof : The hydraulic cylinders adopted polyurethane or rubber free- skeleton dust ring.
Unique Cold Hydraulic Presses Specially Designed for Engineered Wood Flooring (Parquet) Production
Technical parameters of our standard models:
- Max gluing widths - From 200 to 320 mm (Up to 500 mm upon order)
- Max gluing length - 2560 mm to 3840 mm (Unlimited upon order)
- Max gluing height - 800 mm
- Working height - From 800 to 850 mm
- No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order)
- No of independent pressing cycles - From 4 to 12 cycles (unlimited upon order)
- Pitch between pressing cylinders - 320 mm
- Each cylinder has its own stop valve - Yes
- Single stroke - 80 mm
- Single cylinder pressure - 9.100 kg
- Cylinder pressure in total - From 145.600 kg - 218.400 kg (Unlimited upon order)
- Working pressure - Adjustable
- Max working pressure - From 14 kg/cm2 (For 200 mm width) to - 10 kg/cm2 (For 300+ mm width)
- Pressing plate type - Self Aligning!
- No of front aligning beams - 4 pcs (Unlimited upon order)
- Front beams type - Hydraulic
- Front Beam Pressure - Up to 1000 kg; adjustable
- Max system pressure - 18 Mpa
- Motorized material transfer conveyor - Yes, on both sides, independent
- Speed of material transport - Up to 30 m/min
- Speed regulation of transfer conveyor - Yes, both sides, independent
- Power of hydraulic pump - 5.5 kW (1 pc)
- Power of motor for transportation - 2x0.35 kW - geared
- Voltage - 3x400v/50 Hz
- Electricity protection IP 54
Apart from our standard models of presses, depending on the buyer's needs and budget , we are able to offer you custom designed, bespoke presses with various parameters.
(Either one sided or two sided presses; up to 500 mm max gluing width; unlimited max gluing lengths;...)
Power steering system consists of a cylinder, a pump and handle. The oil is pressured from hydraulic pump and a
handle(orbitrol) control a cylinder.
The cylinder helps rudder move and the required oil is supplied from the hydraulic pump.
Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance
Pump is classified Pulley type drived by engine and Power unit drived by electric motor
We offer 7 kinds of handles with various appearance and functions.
Features
Narrow handle diameter helps you operate with small energy and power steering system offers light operation
On where you put the handle, the rudder is fixed
Structure that the rudder does not rotate even when the tide power the rudder
When engine stops, manual steering is capable (Handle becomes heavy)
You can choose the combination fit to your vessel
Application
Vessel above 350 HP
A wide range of vessel from fishing boat to ferry
Electric steering system is equl with the power steering system equipped a solenoid valve.
It is the system which steers with solenoid valve by comparing resistance values of electric handle and rudder angle sensor
It consists of a cylinder and a pump, an solenoid valve and a electric handle.
The cylinder makes the rudder move and the pump supplies the oil to the cylinder. Handle is to swap the direction of hydraulic pressure
Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance
Pump is classified Pulley type drived by engine and Power unit drived by electric motor
We offer 7 kinds of handles with various appearance and functions.
You can choose the combination fit to your vessel
Key features
Narrow handle diameter helps you operate with small energy and power steering system offers light operation
The number of rotation wheel is 2.8 like the hydraulic handle
Analogue type of a indicator for handle and a rudder angle indicator are applied.
Controlled by Joystick / Autopilot
USB port
Autopilot can be used together.
Application
Vessel above 350HP
A wide range of vessel from fishing boat to ferry
Supplier: Kubota diesel engine parts, hydraulic pump parts, electrical system parts, under carriage parts, work equipment parts, operator's compartment and control system parts, service kit and component parts
