Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Supplier: Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps Buyer: Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps
Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on.
Product Name : Aluminum coil
Price range : $1000-$2000 Discounts are available for large orders
Minimum order quantity : 1 ton
Specifications
Thickness 0.1-10mm, width 600-1500,or according to requirements
Standard : ASTM, JIS, DIN, GB,
Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880
Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.
Product : certification
ISO,SGS,BV,TUV,
Processing Service : Welding, Drilling, Cutting, Bending,
Stamping,Embossing
Application : Roof , car building,curtain wall, Shelter ,oil tank,mould
Packing : Wooden pallet or according to customer's request
Lead time : 7 to 15 working days
Payment terms : T/T ,LC
Exporting country : Southeast Asia: Philippines, Vietnam, Laos
Northern Europe: Finland, Sweden, Norway, Iceland
South Africa: Zambia, Angola, Zimbabwe
Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
We are supplier and exporter of Aluminum Alloy Ingots ADC 12
Our company supply ADC 12 and Aluminum Ingots, Origin.. India, Indonesia, Vietnam , China And Europe. PAYMENT TERM.. SBLC, LC AT SIGHT, 30/70 ICPO and BCL
5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. It s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing.
The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%.
Surface Advantages of 5052 Aluminum coils:
1. surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate.
2. The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%.
3. Allow the supplier to illuminate the profile longitudinally to a smooth surface.
4. Other requirements: There are demanders and suppliers to draw up their own.
Application of 5052 Aluminum coils:
5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material.
The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
3003 aluminum coil is the most widely used aluminum alloy. It is made up of aluminum, copper, iron, manganese, silicon and zinc. It is commonly used because it has great resistance to corrosion and is moderately strong. The 3003 aluminum coil is 20% stronger than 1100 grade alloys because it is fused with manganese.
Because it s not heat treatable, it has to be strengthened using cold working alone.
The most common applications for the 3003 aluminum coil are for fuel tanks, sheet metal work and other types of projects that need a metal that is stronger than the 1100 series aluminum. In some cases, it is used for cooking utensils, refrigerator panels, gas lines, storage tanks, garage doors, builder s hardware and awning slats.
* ASTM Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on.
Product Name : ASTM Aluminum coil
Price range : $1000-$2000 Discounts are available for large orders
Minimum order quantity : 1 ton
Specifications
Thickness 0.1-10mm, width 600-1500,or according to requirements
Standard : ASTM, JIS, DIN, GB,
Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880
Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.
certification : ISO,SGS,BV,TUV,
Processing Service : Welding, Drilling, Cutting, Bendingï¼?Stamping,Embossing
Application : Roof , car building,curtain wall, Shelter ,oil tank,mould
Packing : Wooden pallet or according to customer's request
Lead time : 7 to 15 working days
Payment terms : : T/T ,LC
Exporting country : Southeast Asia: Philippines, Vietnam, Laos
Northern Europe: Finland, Sweden, Norway, Iceland
South Africa: Zambia, Angola, Zimbabwe
Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* JIS Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on.
Product Name : JIS Aluminum coil
Price range : $1000-$2000 Discounts are available for large orders
Minimum order quantity : 1 ton
Specifications : Thickness 0.1-10mm, width 600-1500,or according to requirements
Standard : ASTM, JIS, DIN, GB,
Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880
Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.
certification : ISO,SGS,BV,TUV,
Processing Service : Welding, Drilling, Cutting, Bendingï¼?Stamping,Embossing
Application : Roof , car building,curtain wall, Shelter ,oil tank,mould
Packing : Wooden pallet or according to customer's request
Lead time : 7 to 15 working days
Payment terms : T/T ,LC
Exporting country : Southeast Asia: Philippines, Vietnam, Laos
Northern Europe: Finland, Sweden, Norway, Iceland
South Africa: Zambia, Angola, Zimbabwe
Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Product Description :
Aluminum is also theoretically 100% recyclable with no loss of its natural properties. It also takes 5% of the energy to recycle scrap aluminum then what is used to produce new aluminum.
The most common uses of aluminum include:
Aluminum is the third most abundant metal in the Earth’s crust, and the third most abundant element overall. No other metal can compare to Aluminum when it comes to its variety of uses. Some uses of aluminum may not be immediately obvious; for example, did you know aluminum is used in the manufacturing of glass?
Aluminum popular features: Lightweight · Strong · Resistant to corrosion ·
Durable · Ductile · Malleable · Conductive · Odorless
Price of product ( USD price or FOB price) :
Monthly quantity at least 3.000 MT.
Best price over 5.000 MT monthly.
Selling price LME Less 20% .
Product origin : Russia and Non Russia
Key Specifications/Special Features :
Aluminum A7/A8 GOST 11069-74
Quality Value demanded by norm GOST 11069-74
A7 A8
Al Min. 99,7% Min. 99,8%
Fe Max. 0,16% Max. 0,11%
Si Max. 0,15% Max. 0,08%
Cu Max. O,01% Max. 0,01%
Zn max. 0,05% Max. 0,05%
Ti max. 0,02% Max. 0,02%
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
