Sunshine Mechanical Works

Rubber bumpers are widely used in various applications. They are defined as devices used to absorb shock between two objects. The most common application of bumpers is in vehicles and vehicles yards. A bumper is made of Natural rubber and synthetic rubber blended with reinforcement materials. These bumpers are widely used because they are susceptible to damage from small contacts. They are considered to be elastomeric hardware devices that are used for edge protection, cushioning, and impact absorption. Bumper dimensions are varied in length, width and height Bumpers have a specific engineering design to absorb heavy load and it is released without damage also bumper should have elastic properties as well as the required hardness. Easy mounting with nut and bolt for application. Bumpers are protected from weather, ozone, UV and oxygen conditions and we can design customer requirements. Size :L-200x80x80mm Materials : SBR & NR Hardness : 60-65Shore Advantages They provide protection to surfaces and allow spacing and ventilation. The vibration in equipment is controlled by using a bumper. The rubber bumper also offers sliding resistance. These bumpers absorb and deliver momentum during collisions, which reduces the effect of collision. They protect the surfaces from scratches and skidding. The main advantage of rubber and plastic bumpers is that they can be manufactured in the desired colors. Applications They are used to provide protection for safety-related equipment like taillights, headlamps, and parking lights in low-speed collisions. Bumpers offer reduced sound qualities for cabinets and vanity doors. To use installation heavy machine. Heavy-duty rubber dock bumpers are used for both vehicle and loading dock applications. Material -Natural Rubber/Synthetic rubber Properties- Shock absorbing, Vibration Isolation, damping, UV Protection Application-Heavy trucks, container trailers, machinery, dock yards, container yards, unloading ramps Rubber bumper is thick article

Dust Rubber Cover/OEM mold rubber auto parts/Rubber mad. Material: EOC, AEM, NBR+PVC, EPDM Craft: mould pressing or injection-moulding Construction: unreinforce Shape: straight tube or moling tube

Rubber for electrical and electronic parts

Cold Shot Nitrogen Deburring Machine Introduction Automatic deburring is a process for removing flash from molded rubber parts. We use liquid nitrogen, high - speed rotation and shot blasted plastic media in varying combinations to remove the flash in a highly precise, economical and expedient manner. Parts that have thin flash can be quickly and thoroughly cryogenically deflashed. This process is exceptionally good at removing the inner dimensional and complex flash that cannot be removed by any other method. Application O - rings, gaskets and other rubber sealings Insulators and other electric / electronic components Valve stems, washers and fittings Short tubes and flexible boots Rubber absorbers and bumpers for automobile Face masks & goggles Mobile phone housing and intelligent watch strap Zinc and mag alloys like door lockers for auto cars SPECIFICATIONS NS - 120C Size: L1400mm * W1300mm * H2300mm Weight: 1500kg Power Supply: AC380V 50HZ Electrical Capacity: 8KW * 3PH Design Temp: - 130Deg. C Design Pressure: 0.5 - 0.7 Mpa Outer Wall Material: SUS Frame Material: 100% SUS304 Barrel Capacity: 120L Wheel Speed: 6, 000 rpm Max Barrel Speed: 0 - 16rpm Media Throw wheel Size : 350 Operation Mode: Press Button

Application Marine Material Natural Shape DO Type &DD Type Color Black We are manufacturer of Dock Bumpers in Natural rubber as per customer required size. There are two type of Dock Bumpers available with us one is DO Type & other is DD Type as per customer requirement. Our standard size as follows DO Type : 75 mm width x 75 mm width with 25 mm Round Hole 100 mm width x 100 mm width with 50 mm Round Hole 150 mm width x 150 mm width with 75 mm Round Hole DD Type : 75 mm width x 75 mm width x D Shape Hole of 25 mm width x 25 mm Height. 100 mm width x 100 mm width x D Shape Hole of 50 mm width x 50 mm Height. 150 mm width x 150 mm width x D Shape Hole of 75 mm width x 75 mm Height.

factory automobile air conditioning expansion valves Komatsu AN51515-A0490 475002750 TUYoung ID: HY-PZF161 Specification: factory produce Material: Alumium Condition: brand new  Car model: Komatsu PC2000 WA470-6 WA500-6�  A/C Expansion Valve Air Products OEM# AN51515-A0490 AN51515A0490 47500-2750 475002750

Diameter As per Customer size or drawing Usage/Application Dock & Ship Port Material Rubber Type Rubber Fender Color Black

Keeping in mind the diverse requirement of the clients, we offer our clients technically advanced range of Boat Fenders that are available in different dimensions and specifications. They are valued for exceptional quality and are used in different industrial applications. Our entire product range is durable in nature. Features: Light weight High surface strength Durable finish Group Rubber Fender Category Rubber Fender Marine Fender