Model: IRA-HP58/1.8-OEM12
Color: Custom made
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: P0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: µh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.0mm thickness of galvanized steel material
Structure of tank: 4 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.124m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 12 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 150L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Heat pipe pressurized solar water heater features:
1.Adopts the best conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa.
5.No water in the tube, one tube broken don't influence the system working.
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined roof.
8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Pressurized solar water heater working principle:
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Description: OEM Flat panel solar water heater
Color: Custom made
Size: 2mx1m
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.2 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.6Mpa
Flat panel solar bcollector Dimension: 2000x1000x80mm
Absorber material: Selective balck chorme/Blue coating
Head pipe: Copper/Φ22x0.6
Branch pipe: Copper/Φ10x0.5
Quantity of Branch pipe: 7PCS
Welding: Laser welding
Cover: Low iron tempered textured glass
Frame: Anodised aluminium alloy
Insulation material: Rock wall
Bracket: 1.5mm thickness of galvanized steel material,25degree.
Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2m2
Temperature tolerance: from -5C to 250C
Tank capacity: 150L
Quality features, certificates
1.High level of efficiency due to Sunselect coating on the absorber.
2.Low energy loss thanks to excellent thermal insulation.
3.Suitable for on?roof and flat?roof assembly Installation: vertical, side by side.
4.Robust aluminium frame for maximum durability.
5.Highly reliable with long useful life due to the use of high quality, corrosion?resistant materials. Glass covering made from
6.low iron solar glass.
1.Brief Features:
Model:58-470-16
Capacity: 160L
Tank material: stainless steel/Nano plastic
Container loading: 20PG/40HG: 47/105set
Warranty: 5 years from the date of arrival at destination port
Cooperation model: OEM acceptable/CKD parts acceptable
2.Introduction
High Quality Stainless Steel, Non-Pressurized Solar Water Heater
Nowadays, non-pressurized solar water heater is very popular in many countries and area, such as India, Mexico, Vietnam, China, Chile....etc.
Features and advantages:
1. High efficiency and economical system.
2. Suitable for projects and home use.
3. Designed for commercial solar water heating applications.
4. Reliable and efficient with twin-glass solar tubes.
5. Polyurethane insulation ensures a good heating performance and minimal heat loss.
6. Easy plug-in installation.
7. Can be connected in series to increase water heating capacity.
TellS Solar water heaters use the solar energy from the sun to generate heat (not electricity) which can then be used to heat water for showering, space heating, industrial processes or even solar cooling. Solar water heating systems comprise various technologies that are used worldwide increasingly, uses for solar water heater in Domestic: Bungalows and Apartment, Commercial: Hotels, Hospitals, Dairies, and Industrial: Process Industries, Preheating boiler feed water, wherever & whenever you need hot water
1.Stylish slim line design
2. Thermosiphon operation minimises maintenance
3. Electric booster models available
4.Inner tank with vitreous enamel or SUS304
5. Collector absorber with black chrome coating
6. Unpressurized system
7. Reliable, low maintenance operation
8. Flexible option of collector and tank capacity
9. Enhanced protection for maximum life
10. Easy mounting and installation.
1. Ccc, ce, iso certificated 2. Sus 304 food grade tank 3. Get hot water of 95-100 degree 4. Warranty:5years 5. Quick deliver
Characteristics
1. Instant heat exchange to provide plentiful warm water
2. Fresh and high water quality
4. Output water temperature is stable, so it is very comfortable and safe to use
5. Hot&cold water flow is separated
6. Copper coil is tested and does not break
7. Works intelligently and easy and is very reliable
8. Perfect performance
Material
Inner tank: imported stainless steel (sus304/2b), 0.5mm thickness
Outer tank: galvanized steel alloy, 0.4mm thickness
Bracket: galvanized steel alloy, 1.5mm thickness
Heat insulation layer: imported polyurethane (bayer, germany), 50mm thickness
Working temperature: 99 celsius degree
Working pressure: copper coil: above 0.6mpa (6 bars), tank: 0.005mpa (0.05 bars)
Copper coil: 12mm, 0.8mm thickness
Warranty: 1 year for electric parts/5 years for the full system /15 years for the vacuum tube
Remark:
1. Diameter of the tank: 360/460mm
2. Insulation thickness: 50mm
3. Coil connection: 1/2"
4. Electric heater connection: 1"
5.Cold water inlet: 1/2"
6. Installation angel: 45
Packaging details: Manifold in one carton, frame in one carton, vacuum tubes in several cartons
Detailed products description:
1. Certificate: Solar keymark. SRCC. Watermark, Standardmark
2. non-pressure solar water heater
3. 15 years of lifetime
4. high efficiency and good heat conductivity
5. intelligent control ,display the temperature all the time.
Specification:
Storage tank volume
Outer casing: aluminium alloy thickness :0.5mm
Inter tank: SUS304 2b stainless steel
Insulation layer: polyurethane foam /rock wool for optional
Inlet and outlet: SUS304 2b
Heat preservation: 72 hours
Welding: Arg welding
Vacuum tube
Number of tube: 20L ,24L,26L,28L,32L for optional
Tube length: 47*1500/58*1800/47*1800 for optional
Heat absorption rate : 91%
Thermal damage rate: ULT =0.82W/(m2)
Coating of vacuum tube: AL/N/AL
Heat pipe: anti-freeszing>-35
Hail resistance: 25mm
Working pressure: 6bar
Max test pressure:12bar
Max working temperature: 280C
Tube holder: UV stabilized nylon
Support
Aluminum alloy.
