Technical Data: Joint size: DN10-DN65 Thread: BSP,BSPT,NPT,NPTF Welded: ISO1127/4200, DIN11850.1, DIN11850.2, DIN11850.3, SMS3008, ASME BPE Socket Welding Actuator:CF8 Valve body: CF8M, CF8 Seat seals: PTFE/NBR/EPDM Stem seals: PTFE/FKM Piston seals: FKM/NBR Applicable medium: Water, liquid, neutral gas, water steam, slight corrosive gas and liquid Temperature range: PTFE:-10 to +180 Ambient temperature: -10 to +60 degree Viscosity: Max 600mm2/s Installation: Any position Controlling medium: Air or neutral gas Controlling pressure range:0.3-1Mpa. Advantagement: 1.Easy installation, 2.large flux, low resistance(Y-type shape enlarged the flowing section, which could raise the flus by 30% and make it flows more smoothly.). 3.low energy consumption. 4.long life span(The valve stem material is AISSS316, its anti-corrosive ability is super strong. The PTFE sealing parts are in wedge shape , which help the stem adjust and lubriacate automaticlally.).
Technical Data: Joint size: DN10-DN65 Thread: BSP,BSPT,NPT,NPTF Welded: ISO1127/4200, DIN11850.1, DIN11850.2, DIN11850.3, SMS3008, ASME BPE Socket Welding Actuator:CF8 Valve body: CF8M, CF8 Seat seals: PTFE/NBR/EPDM Stem seals: PTFE/FKM Piston seals: FKM/NBR Applicable medium: Water, liquid, neutral gas, water steam, slight corrosive gas and liquid Temperature range: PTFE:-10 to +180 Ambient temperature: -10 to +60 degree Viscosity: Max 600mm2/s Installation: Any position Controlling medium: Air or neutral gas Controlling pressure range:0.3-1Mpa. Advantagement: 1.Easy installation. 2.large flux, low resistance(Y-type shape enlarged the flowing section, which could raise the flus by 30% and make it flows more smoothly.). 3.low energy consumption. 4.long life span(The valve stem material is AISSS316, its anti-corrosive ability is super strong. The PTFE sealing parts are in wedge shape , which help the stem adjust and lubriacate automaticlally.).
Technical Data: Joint size: DN10-DN65 Thread: BSP,BSPT,NPT,NPTF Welded: ISO1127/4200, DIN11850.1, DIN11850.2, DIN11850.3, SMS3008, ASME BPE Socket Welding Actuator:CF8 Valve body: CF8M, CF8 Seat seals: PTFE/NBR/EPDM Stem seals: PTFE/FKM Piston seals: FKM/NBR Applicable medium: Water, liquid, neutral gas, water steam, slight corrosive gas and liquid Temperature range: PTFE:-10 to +180 Ambient temperature: -10 to +60 degree Viscosity: Max 600mm2/s Installation: Any position Controlling medium: Air or neutral gas Controlling pressure range:0.3-1Mpa.
Product : Valves Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 112 reviews price : Start from 5 USD RFP India is Indias wellknown manufacturer supplier and exporter of Valves which is a device that regulates directs or controls the flow of a fluid gases liquids fluidized solids or slurries by opening closing or partially obstructing various passageways Valves are technically valves fittings but are usually discussed as a separate category In an open valve fluid flows in a direction from higher pressure to lower pressure It is being made up from different materials like Stainless Steel Carbon Steel Alloy Steel Gun Metal Brass Bronze Forge Cast Iron Cast Steel and Mild Steel Meanwhile Valves are quite diverse and may be classified into a number of basic types such as Ball Valve Butterfly valve Ceramic Disc valve Check valve Choke Valve Diaphragm valve Gate valve Globe valve Knife Valve Needle Valve Pinch Valve Piston Valve Plug Valve and so on
We supply valves� for specialized fields such as Oil & Gas, Offshore, Petrochemical, Power, Marine and General Industry. Types are Ball Valves, Gate Valve, Globe Valve, Swing NRV Valve, 3 Way Valve, Butterfly Valve, Wafer Check Valve, Disc Check Valve and Customize Valves too are in scope of supply.
Gun Metal Angle Globe Valve BS 5154 Pressure Rating : PN-16 Material : Gun Metal, Bronze Description : Screwed in Bonnet, inside Screw, Rising Stem Ends : Screwed Female to BS:21 / IS:554 Operator : Hand wheel Item Code : GM000011 Size : 15mm Notes : Available Valve Size PN-16 8mm to 80mm PN-25 8mm to 150mm
Cast Iron Angle Globe Valve BSEN 13789 Pressure Rating : PN-16 Material : Cast Iron Description : Bolted Bonnet, OS & Yoke Type, Rising Stem Trim : SS (13% Cr.) Ends : Flanged Specials : IBR (up to 200mm) Item Code : CI000016 Size : 25mm Notes : Available Valve Size : PN-16 20mm to 150mm PN-10 200mm to 250mm
Ductile Iron Resilient Seated Gate Valve BS 5163 Pressure Rating : PN-16 Material : Ductile Iron Description : Bolted Bonnet, Non Rising Stem Ends : Flanged Operator : Hand wheel, Gear, Electric Item Code : DI000020 Size : 50mm Notes : Available Valve Size : 50mm to 800mm
Gun Metal Angle Horizontal Lift Check Valve BS 5154 Pressure Rating : PN-16 Material : Gun Metal, Bronze Description : Screwed in Cover Ends : Screwed Female to BS:21 Item Code : GM00033 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
