Application: Wireless Remote Control Switch, Smart Plug, Wireless Doorbell, Vehicle Anti-Theft Device(RKE), Weather Station, etc. RF Advantages Parameters flexibly configurable and modifiable with software, simple and user-friendly operations High measured sensitivity, narrowband applications, long communication distance Easily passing safety Blocking Test, very good immunity Integrated DutyCycle operating mode, reducing the average operating current, ultra-low power consumption Different frequencies can be set with software without changing the crystal, reducing peripheral components Parameter: Frequency: 300~960MHz (Support software settings) Modulation Mode: OOK/(G)FSK Data Rate: 0.5~30Kbps/0.5~100Kbps(FSK) Sensitivity: -114 dBm(1kbps 0.1%BER) Measured Distance: Product: > 300m, Demo Board: > 1000m Blocking Immunity: SR=1Kbps, ¡¡¡ì¡¨¨ 1/2/10MHz, Offset: 52/74/75db Power Supply: 1.8~3.6V Rx Current: 4.2mA@434MHz; 4.6mA@868MHz Duty-Cycle Rx Mode: Support software settings, Reduce average working current Receiver Start-up Time: DutyCycle: On 12.3ms/off 7.3ms Receiver Wake-up Time: < 1ms Wake On Radio Function: Provide for setting of Preamble, Syncword and other conditional wake-up Crystal: 26MHz+/-20PPM Program Limes: One million times Operation Temperature: -40~+85 Communication Mode: SPI-3Wire Chip Package: QFN-16 IC Size: 3X3X0.75mm Certifications: RoHS\REACH\CE, etc. Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: Remote controller. RF Advantages: Cost-effective solution of SoC Single-Chip Remote Controller Parameters flexibly configurable and modifiable with software, simple and user-friendly operations Maximum power output of 13dBm, adjustable Different frequencies can be set with software without changing the crystal, reducing peripheral components Parameter: Frequency: 240~480MHz(Support software settings) Modulation Mode: OOK Data Rate: 0.5~30Kbps Output Power: -10~+13dBm(Support software settings) Output Power programmable with steps: 1dBm Second Harmonics: 315\434M@+13dBm: -60dBm/-52dBm Third Harmonics: 315\434M@+13dBm: -65dBm/-60dBm Power Supply: 1.8~3.6V Operating Current: 18mA (+10dBm\50% duty cycle\9.6Kbps) Sleep Current: 1|¨¬A Crystal: 26MHz +/-20PPM Crystal Load Capacitance: 12~20PF(Support software settings) PLL Lock MODE: Dynamic lock Program Limes: One million times Operation Temperature: -40~+85 Communication Mode: Tx with MCU Chip Package: SOP-14 IC Size: 8.65X1.6X1.75mm Certifications: RoHS\REACH\CE, etc. Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
RF Advantages: LoRa spread spectrum modulation technology, enabling long communication distance and very strong interference immunity Ultra-small size, surface mount design, easy to embed Support multiple modulation modes to facilitate network use Support deep custom designs and other special applications Easy to produce, free of RF debugging Support frequency hopping communication (LoRa mode) Support specified node communication and broadcasting communication modes to facilitate customers to Set up the wireless network Support self cycle reset function Support module firmware upgrading Application: AMR Auto Meter Reading, Network Communication, Remote Control, Mine Monitoring, Industrial Control, etc. Parameter: Frequency: 433/470/868/915MHz (¡¡¡ì¡¨¨ 20MHz Provide for setting) Modulation Mode: LoRa/FSK Output Power: 2~20dBm Sensitivity: -139dBm (Max) Data Rate: 1.2~115.2Kbps(Provide for setting) Tx Current: 130mA (+20dBm) Rx Current: 20mA Standby Current: 2|¡¡ì¬A Frequency Deviation: 10~50kHz Receive Bandwidth: 42~166kHz Interface: 8N1/8E1/8O1 TTL UART(Scalable exteriorRS232\RS485) Communication Distance: > 5000m@LoRa Antenna Impedance: 50|¸ Operation Temperature: -20 to +70 Power Supply Mode: DC4.5~5.5V Module Size: 47X26X10mm Certifications: FCC\ETSI\RoHS Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: AMR Auto Meter Reading, Industrial Control System, Wireless Remote Control Equipment, Mining Safety Monitoring, Smart Home, Smart Security, Internet of Things and Other Wireless Devices, etc. RF Advantages: High output power, very good receiver sensitivity, long communication distance Strong interference resistance to meet wireless certification standards Meet the requirements of mainstream wireless applications, high cost-effective No output power reduction at a supply voltage down to 1.8V Parameter: Frequency: 868/915MHz Modulation Mode: FSK/GFSK/OOK Output Power: 20dBm Sensitivity: -123dBm (1.2kb/s in FSK) Data Rate: 300Kbps (FSK mode) Tx Current: 125mA (+20dBm) Rx Current: 9.3mA Standby Current: 0.1|¨¬A Interface: SPI Communication Distance: > 1000m(1.2kb/s) Antenna Impedance: 50|¸ Operation Temperature: -40~+85 Power Supply Mode: DC1.8~3.7V, 1.8VTransmission power Of power supply will not fall Module Size: 16X16mm Certifications: FCC\ETSI\RoHS Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
1550nm direct modulation optical transmitter with high index and agc function. It adopts high linearity and low chirp dfb laser, max. Output level comes to 10db. Built-in pre-distortion compensation and agc, apc, atc closed loop control, which improves the system index obviously. It can be used in fttx (â?¤10km) of second-grade service area (sub-headend), also can be used in wdm narrow-band multiplexing and ip/qam. Feastures: 1> low chirp, high linearity dfb laser, chirp compensation. 2> advanced front panel with digital display function 3> agc fiber/ rf in, fiber out. 4> dual module rf driver , high efficient laser pre-distortion adjustment. 5> full-automatic omi control, agc & mgc. 6> intuitionistic modulation status display. 7> built-in dual back-up power supply, switch automatically . 8> casing temperature auto-control, ensure the long life of the laser
1310nm optical transmitter, with front panel digital display showing input level, which adopts high linearity dfb laser of famous brand in the world, and builds-in perfect pre-distortion adjustment circuit and laser apc, atc closed loop control circuit. All the operating parameters are controlled by microprocessor, and the lcd screen on the front panel can display relative operating status and the fault information. Cmot-1310 series is designed and produced by absorbing the advantages of all kinds of 1310nm transmitter from both home and abroad. Featured with high index, multi-function and high reliability, it is suitable for high-end subscribers application 1> adopt word-famous company (ortel, aoi selected by user) advanced dfb laser instrument; max output optical power reach 31mw in ortel laser. Our specialized 2 dfb design max. Output level comes to 31+31mw. Coaxial laser max. 10+10+10+10mw (4*10mw) 2>best looking and convenient design of the front panel digital display. 3> advanced fiber in/ rf in, fiber out function, transit longer distance. 4> add advanced rf pre-distortion circuit, to use as proofreading catv system most important ctb and cso index, and to improve c/n index. 5>use our own gaas( imported mmic) hybrid, assure good output level. 6>built-in perfect power output automatic control circuit and laser thermoelectricity refrigeratory temperature automatic control circuit, insures highest output index and longest life. 7>built-in microprocessor automatic control circuit makes dfb laser always in best work state. 8>front panel blue vfd display, shows various main work status parameters and realizes automatic fault alarm and network management monitor.
Spec: Frequency:868/433 MHz Modulation: FSK Supported as well as ASK Circuit Shape: PLL Data Rate: 3K~ 1000Kbps Channel Spacing: 180KHz Sensitivity: 20 dB Sinad Operating Temperature Range: -40 ~ +85 Centi degrees Receiving Current: 5.7mA 5V; Sleep Mode Current: 50 nA Digital RSSI Output Stable; Easy to Use, Low External Parts Count Compliant with FCC, IC, ETSI, RoHS Dimensions: 3.2 x 1.4 x 0.5 (L x W x H) in cms Weight: 5 gms
Parameter: Modulate Mode: ASK/AM Frequency: 315/433.92MHz f¦aOf¦aoother frequency availablef¦aO© Voltage: 3~5V Data Rate: 4.8Kbps Sensitivity: -112dbm Current: 10~12mA Operate Temperature: -20 to +85 Centigrade Degrees Channel Spacing : +/-220 KHz IF frequency: 10.7MHz Size: 31*13.5mm Pin assignment: GND DATA DATA VDD VDD GND GND ANT.
Parameter: Data rates to 10,000bps Modulation: ASK/AM Frequency: 315/433.92Mhz/868M fªaoaOfªaoaoother frequency availablefªaoaO© Voltage: 5V(DC) +/-10% Bit-rate: 9.6kbps/4.8kbps Current: 4.6mA Sensitivity: -110dBm Operating temperature: -40¡æ ~ +85 ¡æ Dimension: 43mm(L)*12mm(W)*5mm(H) 10.7 MHz high rejection IF filter Power down mode with very low supply current (50nA typ) Channel Spacing : +/-170 KHz Pin assignment: VSS DATA(SHUT) DATA VDD VDD VSS VSS ANT. Foam Protection Inside; then in Carton outside
