The soft starter of air-conditioning TL-ASSU220P3 is an embedded air-conditioning controller.It regulates the start-up voltage and current of the compressor intelligently by utilizing advanced micro-control technology of SCM,and effectively reduces the instantaneous current and power of the compressor while starting-up,thus protects the compressor and prolongs its life.Simultaneously,it also depresses the shock while air-conditioning starting up in the power supply network. The most important feature of our product is it can control the highest launching transient current of air conditioner to be about 2 times as great as its rated current.never exceed 3 times.It can effectively protect air conditioner compressor, extend its service time. Additionally, when it detects the compressor couldn't start because of the imbalance of pressure,it will protect the compressor, then restart after 90 seconds.So then effectively prevents the compressor from overburning for failure start. Main technical parameters Highest continuous working voltage: 250VAC. Highest continuous working current: 18A. Highest non-repetitive inrush current: 400A(300 M ohms. The tolerant pressure between the chassis and the shell: >3000 V/AC in 1 minute. Ambient temperature: -40 to 85 C. Relative Humidity: 0~95% RH(
Starter and Alternator and their child parts for Commercial Vehicles and Cars
Supplier: Engineering components for automotive, electrical, construction, transmission tower projects , rail road components hardware like different types of washers, circlips & retaining rings, clips , clamps ,hose clamp , spring band clamps ,metal pressed parts, wire form parts.
Services: Manufacturing & sourcing agents
Air-conditioner (Single Phase) Soft Start Controller Introduction The RUIJING soft start controller - RJ-ASSU220P5 provides an effective solution in reduction of start-up current, typically up to 70%, but still provides full startup torque for compressors and motors. Across the line starting of air-conditioner compressor or induction motors is accompanied by inrush currents up to 7-8 times higher than running current, and starting torque up to 3 times higher than running torque. The increased unnecessary torque results in sudden mechanical stress on the machine which leads to increased wear and higher service costs and reduced service life. Moreover, the high inrush current and current peaks may stress the power supply system to increased mains and generator loads which may lead to voltage dips results in breaking down of other valuable equipment or system function. RJ-ASSU220P5 is an embedded design air-conditioner (for single phase power system) soft start controller. It regulates the start-up voltage of the compressor/motor intelligently to effectively reduce the inrush and surge current while starting-up, thus consume much less power from the public utility network or on-site AC power supply system but still provides full startup torque for compressors and motors. RJ-ASSU220P5 effective limits the inrush current and so improves stability of the power supply and reduces transient voltage drops that may affect or break down other loads. This will eliminate the need of over dimension of the power supply system which results in reduce capital expenditure investment in power supply capacity, charge meter, circuit breaker and power wire line capacity etc..and extend the service life of the motor or compressor effectively. RJ-ASSU220P5 is a compact size, light weight cost effective soft start controller with fire proofed housing and sealed by resin make it capable to resist extreme weather and survive in harsh environment (air-conditioner outdoor unit), this makes RJ-ASSU220P5 a cost effective solution with high reliability and stability.
Air-conditioner (Single Phase) Soft Start Controller Introduction The RUIJING soft start controller - RJ-ASSU220P5 provides an effective solution in reduction of start-up current, typically up to 70%, but still provides full startup torque for compressors and motors. Across the line starting of air-conditioner compressor or induction motors is accompanied by inrush currents up to 7-8 times higher than running current, and starting torque up to 3 times higher than running torque. The increased unnecessary torque results in sudden mechanical stress on the machine which leads to increased wear and higher service costs and reduced service life. Moreover, the high inrush current and current peaks may stress the power supply system to increased mains and generator loads which may lead to voltage dips results in breaking down of other valuable equipment or system function. RJ-ASSU220P5 is an embedded design air-conditioner (for single phase power system) soft start controller. It regulates the start-up voltage of the compressor/motor intelligently to effectively reduce the inrush and surge current while starting-up, thus consume much less power from the public utility network or on-site AC power supply system but still provides full startup torque for compressors and motors. RJ-ASSU220P5 effective limits the inrush current and so improves stability of the power supply and reduces transient voltage drops that may affect or break down other loads. This will eliminate the need of over dimension of the power supply system which results in reduce capital expenditure investment in power supply capacity, charge meter, circuit breaker and power wire line capacity etc..and extend the service life of the motor or compressor effectively. RJ-ASSU220P5 is a compact size, light weight cost effective soft start controller with fire proofed housing and sealed by resin make it capable to resist extreme weather and survive in harsh environment (air-conditioner outdoor unit), this makes RJ-ASSU220P5 a cost effective solution with high reliability and stability.
LE1 three phase magnetic motors starter is mainly applied to circuit of AC 50 or 60Hz,voltage up to 550V for far distance making and breaking circuit and frequent start and control motor. It has the features of small volume, light, weight, low power consumption, high efficiency, safe and reliable performance etc.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
soft starter is one of industry's most featured digital soft starters. It is designed to soft start and stop standard AC induction motors from 5.5kW to 850kW with a maximum voltage rating of 500VAC, designed in accordance with IEC, UL&CSA standards and conforming with CE, EMC and LV directives. Key Features Voltage ratings for 3 phase systems up to 500VAC 50/60Hz Output current from 14 to 1290 Amps, in 16 rating sizes for continuous operation from 50 - 120% Maximum applicable motor up to 700kW/400V in Class 10, and up to 600kW/400V in Class 20 Current limiting up to 700% Frequency range 45-65Hz Working ambient temperature 0-55�¦C. ratings derated 1.5%/�¦C above 40�¦C Relative humidity 95% Alfa-numeric programming keypad with status monitoring indication Programming Software tool Global Standards CE, IEC, UL & CSA Brands : Siemens, ABB, INVT, Delta, Danfoss, Mitsubishi, Rockwell, Schnieder, Chint
Brand Name:EMHEATER Model Number:EMA Type:soft starter Frequency:50HZ/60HZ Output Power:0.18KW-560KW Protect Feature:Explosion-proof Phase:Three-phase Certification:CE, ROHS AC Voltage:220V/380V/460 / 480 V Place of Origin:Guangdong, China (Mainland) Efficiency:IE 4 Packaging & DeliveryPackaging Details:carton / wooden case Delivery Detail:2 days Min.Order Quantity:1 Piece/Pieces Supply Ability:100000 Piece/Pieces per Month Port:shenzhen Payment Terms:L/C,T/T,Western Union,MoneyGram,paypal
