Anyang Forging Press Machinery Industry Co., Ltd.

We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps. Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.

Product name: Beetroot Pulp HS Code: HS Code: 230320 Origin: Egypt Form: Pellets specification of sugar beet pulp Pellets (SBPP) Product: - sucrose 7% max. - diameter of bellets: 08-10 mm - Moisture : 09-12% - Protein : 07 % min Beet pulp is a byproduct from the processing of sugar beet which is used as fodder for horses and other livestock. Beet pulp is the fibrous material left over after the sugar is extracted from sugar beets. It is supplied either as dried flakes or as compressed pellets, but when fed to horses it should always be soaked in water first. Composition Despite being a byproduct of sugar beet processing, beet pulp itself is low in sugar and other non-structural carbohydrates, but high in energy and fiber. Among other nutrients, it contains proteins, calcium, and phosphorus. It has no Vitamin A, so additional forage or supplementation is required to provide complete nutrition. Feeding Beet pulp is usually fed to horses in addition to hay, but occasionally is a replacement for hay when fed to very old horses who can no longer chew properly. A standard ration of beet pulp for horses is usually 2 to 5 pounds (0.9 to 2.3 kg) dry weight. Before feeding to horses, beet pulp is usually soaked in water, at a ratio of one part pulp to about four parts water. The maximum amount of water is absorbed after three to four hours, but it may be soaked for as little as one to two hours, especially in hot weather when there is a risk of fermentation. Most commercial feeds designed for geriatric horses contain large amounts of beet pulp and are fed straight out of the bag without being soaked, and manufacturer's directions generally recommend giving such feeds dry unless the horse has dental issues that make chewing difficult. Beet pulp is not usually soaked before feeding to cattle, sheep, and goats. Dehydrated beet pulp has a good nutritive value for ruminants. It is also fed to poultry, pigs, and rabbits. Beet pulp can also be fed wet, pressed, or ensiled. We are ready for Container orders or even bulk vessel CONTACT US NOW FOR MORE INFO (24/7)

Alfalfa Pellets Thank you for contacting us. We can offer best quality Alfalfa Pellets. Further, this is a 100% Natural Product grown and cultivated in Gujarat State of India, the nutritional specifications are subject to vary as no additions of foreign matters are made to increase/control the nutritional specification of the same. Available In : 8 x 25 mm We produce widest range of Alfalfa Pellets for Animal Feeding Objective. We produce 8� mm Alfalfa Pellet and 10� mm Alfalfa Pellet for Animal Feed Forage Industry Alfalfa Pelleting Process Generally its grown during the period of November to April Months of the year in India and the cutting process begins from the 45th� day of the plantation. The field cut green alfalfa is spread on the agriculture land for sun drying process (which is generally called sun curing process). This is the most important phase of administration, wherein during the sun curing process the alfalfa leaves and stem has to be dried in such a manner that the leaves should not turn yellow or loose green pigments. After 7 days of meticulous administration, the green alfalfa is converted in to hay. The hay is loaded in trucks and transported to production side, where the first stage is to sieve (clean) the entire hay, so minor or major dust articles are removed from the same. After cleaning process the hard stem particles are removed through a mechanical machining process and the available residue is absolutely clean and dehydrated soft leaves and soft steam. The dehydrated alfalfa particles (leaves & steam) are grinded to a finer particles size. The overall texture of hay is now converted to Powder Form. The powdered alfalfa is then passed through 100 degree Celsius stream for about 8 minutes, which detoxifies the alfalfa from any toxic elements and also gets cooked at a very digestible ratio. The highly cooked alfalfa meal is then pelleted through feed extrusion methodology, during the process of pelleting again the cooked meal reaches to an extremely high temperature of 123 Degree Celsius, due mechanical thrust of the extruder in its 22 ft long barrel The extremely hot pellets are then cooled down to a room temperature level, enabling the moisture level below 12%. The above process produces the most advance format of Alfalfa Hay Pellet in 8 x 25 mm�  and 6 x 25 mm size absolutely hygienic for Animal and Poultry feeding Purpose Facts of Indian Alfalfa The pricing of the alfalfa hay / pellet is totally dependent of the physical hay recovery after sun curing process, which varies 10% to 15%, which means when 100 Kgs of green alfalfa is sun dried, the hay recovery varies between 10Kgs to 15 Kgs. The recoveries are totally dependent on the environmental factor and the water content within the stems of the alfalfa. Countries like Canada, Northern US, New Zealand and Northern European Countries donâ??t get direct sun light (rather they get inclined sun lig

Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.

Charcoal 3000-5000 tons a month from producer. smokeless, odorless and sparkles PP bags by 20 kg each and also Big bag packing with immediate effect and at very competitive prices. Our goal is to satisfy each and every valued customer to the fullest. We are willing and able to meet supplies for hardwood charcoal, sawdust briquettes, wood chips with immediate effect and at very competitive prices. Our goal is to satisfy each and every valued customer the world over. our services are superb and delivery is prompt. please Contact if interested in our company. We shall make sure we give you the best deal possible. We are dealers of Hardwood Charcoal. We can supply in Large and small quantities alongside very low competitive price. Below is our specification of HARDWOOD CHARCOAL Humidity content: 3, 5 % max Ash content: 2 % max Fix carbon: 90% min Moisture content: 3% max Weight of 1 cub. dicemeter of carbon not less 210 gr Size : 20 - 100 mm Specification For Hard Wood Charcoal The charcoal comes in smaller and larger size depending on the usage.The larger size is used in Restaurant industry for BBQ purpose,while the smaller size is used for Shisha purpose. - 100% natural produce - Very high calories - No odor, no flame, no smoke - Packing in 10kg carton box Specification of Grapefruit Charcoal: Place of Origin: Namibia Material:Sisha wood, hard wood Type:Black Charcoal Shape of charcoal:Stick Burning time of charcoal 4 hours Application: Barbecue (BBQ)/Shisha Calory (J):7069 Diameter of charcoal:3-15 cm Length of charcoal:3-20cm Fixed Carbon %54.72 Volatile Matter (on dry basis 3.98 Ash Content (%): 4.35

POWER 1. 400W-420W 1722*1134*30 Black/ Silver 2. 440W-460W 2094*1038*35 / 2094 *1038 *35 / 2094 *1038 *30 3. 540W-550W 2279*1134*35 / 2279*1134*30