Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Supplier: Hardwood and softwood logs usa and canada
souther yellow pine logs, eastern white pine logs
walnut logs, red oak logs, cherry logs, african teak logs & various other specie
lumber sd and kd, syp lumber , ewp lumber
lumber : ashwood ,redoak, white oak ,walnut sawn timber hardwood : red merantiwood malaysia
european hardwood, beechwood,ashwood,red oak ,white oak , whitewood : ad ast, kd ,kd s4s white wood and wood pallets
austrian whitewood, bosnian whitewood, romanian whitewood, usa pine wood brazil whitewood
plywood :china ,malaysia,indonesia ,vietnam commercial plywood, veneer plywood ,melamine plywood, hpl plywood
mdf: china ,thailand ,malaysia
plain mdf ,melamine mdf , veneer mdf , high glossy mdf , film faced plywood (marine plywood): china,india,vietnam
shuttering plywood
solid chipboard, particular board and osb board
doors and frames
Buyer: Hardwood and softwood logs usa and canada
souther yellow pine logs, eastern white pine logs
walnut logs, red oak logs, cherry logs, african teak logs & various other specie
lumber sd and kd, syp lumber , ewp lumber
lumber : ashwood ,redoak, white oak ,walnut sawn timber hardwood : red merantiwood malaysia
european hardwood, beechwood,ashwood,red oak ,white oak , whitewood : ad ast, kd ,kd s4s white wood and wood pallets
austrian whitewood, bosnian whitewood, romanian whitewood, usa pine wood brazil whitewood
plywood :china ,malaysia,indonesia ,vietnam commercial plywood, veneer plywood ,melamine plywood, hpl plywood
mdf: china ,thailand ,malaysia
plain mdf ,melamine mdf , veneer mdf , high glossy mdf , film faced plywood (marine plywood): china,india,vietnam
shuttering plywood
solid chipboard, particular board and osb board
doors and frames
Supplier: Chemicals, minerals, agro products, steel, aluminium, copper, scaffolding products, minerals, scrap, washing machine parts, refrigerator parts, micro oven parts & auto parts.
Buyer: Chemicals, minerals, agro products, steel, aluminium, copper, scaffolding products, minerals, scrap, washing machine parts, refrigerator parts, micro oven parts & auto parts.
We are supplier and exporter of Manganese Oxide. Manganese Oxide Fertilizer Grade: Application: The product is generally used by the fertilizer industry. Fertilizer Grade: Appearance: Fine greenish-brown powder Total Manganese (Mn): 54% +/- 2% Manganese Oxide (MnO): 68% Iron as Fe: 12% max. Silica as SiO2: 12% max. Alumina as Al2O3: 5% max. Manganese Dioxide (MnO2): 2% max. Screen analysis 100 mesh (BSS): 95-100% Passing. Manganese oxide Mn :- 44 - 46 % Mno2 :- 06 % max. Sio2 10 % max. Fe203 :- 08 % max. 50 kgs. Hdpe begs.
We deals in the following products of India, China, Taiwan and Korea Origin:- Aluminium Tape
We supply the Quality Ferro Alloys Like Ferro Manganese HC / MC / LC Grade I II III Mn 65% min 70% Min 75% Min Si 2% Max 2% Max 1.50% Max C 8% Max 8% Max 8% Max S 0.05% Max 0.035% Max 0.03% Max P 0.40% Max 0.30% Max 0.25% Max MC FeMn Mn 70%Min /75% Min / 78% Min Si 1.50% Max C 1.50% MAX S 0.03% Max P 0.25% Max Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.
