Model No.: CNC-940GM X axis travel: 950mm Y axis travel: 380mm Z axis travel: 450mm Distance from spindle nose to the work table: 120mm Distance from spindle center to column guideway: 460mm X rapid feed: 36m/min Y rapid feed: 36m/min Z rapid feed: 24m/min X/Y axis feed motor rated power: 1.6/2.0kw X/Y axis feed motor rated output torque: 7.7-8.4Nm Z axis feed motor rated power 2.6kw Z axis feed motor rated output torque 10Nm Cutting rapid feed 0-8000mm/min The width of the triaxial linear guide 35mm The number of the slider in the X axis 6 pieces The number of the slider in the Y axis 4 pieces The number of the slider in the Z axis 4 pieces Triaxial screw size 40/12mm Work table size 1500x420mm The maximum load capacity 400KG Table "T" type groove The number of grooves 4pieces Width 18mm Spacing 90mm Positioning accuracy 0.01mm Repeat positioning accuracy 0.008mm Spindle speed range 20-8000rpm/min Main servo motor rated power 3.7kw Main servo motor 30 minute locked-rotor power 5.5kw Main servo motor rated output torque 24Nm Spindle sssembly dynamic balance mode G1 Feed motor connection form Direct connection Taper of spindle hole BT40 Tool changer Carousel tool changer Tool Capacity 12piece Max tool diameter (Full) 75mm Max tool weight 7kg Max tool length 300mm Cutting Tool Selection Mode Forward and reverse arbitrary tool selection Machine tool electric gross capacity 10KVA Power requirements Customized Dimension of machine tool 1950x1600x2000 mm Weight of machine 1950KG Machine protection shield Half Cover/Semi enclosed