Ezplex MTBC/NTM Real-time PCR Kit is an in vitro diagnostic test that simultaneously detects Mycobacterium tuberculosis complex (MTBC) and 20 types of nontuberculous mycobacteria (NTM). Sensitivity : Multiple gene targets for MTBC and NTM. Clinical Performance: Validated clinical performance. Fast Results: Testing can be completed within 2 hours post extraction.
Temperature Block Temperature Range: 0 - 105 Max. Heating Rate: 7 /s Max. Cooling Rate: 5 /s
Helicobacter pylori is a parasitic bacterium in the stomach that lives between the gastric mucosa and mucus. According to the WHO, more than half of the world's population has H. pylori and is the third leading cause of cancer-related deaths. In 1994, the WHO's IARC classified H. Pylori as a Class 1 carcinogen. The incidence of H. pylori in developing countries is the highest worldwide, highlighting the need for highly accurate and manageable testing. By 2025, the H. pylori testing market is expected to be worth 6 billion. Accordingly, SML Genetree has developed a reagent that can diagnose Helico-bacter pylori and Clarithromycin-resistant mutants (A2142G, A2143G) through DNA extracted from human hygienic tissue using Real-time Polymerase Chain Reaction. Since it contains multiple gene regions, Helico-bacter pylori and Clarithromycin-resistant mutations can be detected sensitively, and high reproducibility has been demonstrated through repeated tests by serially diluting various positive samples and standards. In addition, as a result of clinical evaluation on human sanitary inspection tissue by commissioning a large domestic consignment inspection institution, high sensitivity and specificity were confirmed, proving its excellent clinical performance.
2X Real-Time PCR Master Mix including SYBR Green in Mixture 2X HRM Master mix
DESCRIPTION * Detection of Sars-Cov-2 with reverse transcption Real time PCR ( TAT 2.0 hr ) * Amplify N gene and RdRp(orf1ab) gene of Sars-Cov2 AVAILABLE SAMPLE TYPE * Sputum * Oropharyngeal ( OP ) and nasopharyngeal ( NP ) swabs
This product qualitatively confirms the presence or absence of a new coronavirus (2019-nCoV, COVID-19) using reverse-transcription Real Time Polymerase Chain Reaction in sputum, oropharyngeal and nasopharyngeal specimens. It is an in vitro diagnostic medical device.
This kit is intended for qualiativein vitro detection of Orf1ab and N genes of Novel Coronavirus 2019-nCoV which are found in throat swab,sputum and alveolar lavage fuid samples of suspected cases of pneumonia,suspected cases of clustering and other patients who need to carry out diagnosis or differential diagnosis of Novel Coronavirus 2019-nCoV infection.
Covid-19 Diagnostic Kit(Made in Korea) PCR running Time : 30m
Monkeypox Virus Real-time PCR Kit. PM for details.
African swine fever virus (ASFV) real-time PCR test kit enables the safe detection of African swine fever virus DNA in serum, blood, tissue, lymph nodes, spleen, muscle from pigs and breeding environment samples within 40 minutes. The kit consists of fluorescence PCR mix , positive control , negative control and lysis solution for real-time PCR amplification of ASFV. Fluorescence PCR mix contains primers, probes, enzyme and buffer for detection of the ASFV P72 gene. In addition, the role of lysis solution is to simply process samples and release DNA.
COVID-19 Real Time RT-PCR Kit detects the novel corona virus, COVID-19 using one-step real-time RT-PCR in a single tube. The target genes for the detection of the virus are Orf1 ab and N gene. The kit includes primers and probe set targeting the human Rnase P gene that serves as an internal positive control for the real-time RT-PCR. Ordering Info : 96 Tests/Kit (MOQ : 10 Kits)
Unit Price: USD 15 Target Region: RdRP, E gene, N gene Accuracy: 100% Recommended PCR: CFX96 Real Time PCR System (Bio Rad) DTprime DT-96 QIAGEN Rotor-Gene Q Box Size: Size: W 80 x D 80 x H 65 (mm) Weight: 45g / box Certification: Korea GMP (ISO 13485 2003) European CE
Ezplex Respiratory Pathogens Real-time PCR Kit is an in vitro diagnostic test for the qualitative detection of 19 respiratory viruses and 6 types of pneumonia-causing bacteria through nucleic acids isolated and extracted from human throat swabs using real-time polymerase chain reaction Comprehensive Panel- One test can identify 19 respiratory viruses and 6 bacterial species simultaneously. Sensitivity Detection of all targeted viruses and bacteria with high sensitivity. Convenience Genetree Viewer analysis software available for users to conveniently produce test results. Clinical Performance: Clinical testing confirmed the high sensitivity and specificity. Stability: Shelf life of up to 12 months. Analytical Specificity: Testing of 31 species of microorganisms showed no cross reactivity.
SFTS Virus Real-time PCR Kit is an in vitro diagnostic test intended for the qualitative detection of the Dabie bandavirus that causes Severe Fever with thrombocytopenia Syndrome using nucleic acid RNA extracted from human blood or serum. Clinical evaluation performed with human blood specimens confirmed clinical accuracy. High reproducibility with similar results were confirmed various tests.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH-500KWH optional 5. The use of international advanced Mitsubishi IPM module and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform 9. PV charge controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of PV modules and batteries 10. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
