Vibration Connectors Suppliers and Manufacturers

VIBRATION CONNECTORS MANUFACTURERS & SUPPLIERS Stainless steel vibration eliminator: Aeroflex Vibration eliminators are specially designed to absorb mechanical vibration and destructive force of noise which is transmitted by the compressor, and also eliminate the stresses linked with piping thermal expansion in refrigeration and air condition installation. These connectors are TIG welded stainless steel hose with copper pipe, due to there is not any brazing so these connector bear more temperature as compared to brazed fitting The main function of vibration eliminator is to absorb compressor vibration and stop its transition into pipe network, by isolating the vibration the risk of damage to pipe work and related component reduce, 1.1 Size range of vibration eliminator: The comprehensive range of vibration eliminator are available from to 3 1/8 Outer diameter of copper tube, copper tube are comply a per ASTM B88 & ASTM B88M (water & general plumbing system) & ASTM B280 (air conditioners & refrigeration system) 1.2 Material specification: Aeroflex Vibration eliminators are manufacture from EN 10028-7, Stainless steel SS 321 & SS 316L annular corrugated hose with SS 304 stainless steel braid. All unit are brazed with copper tube, detail dimension of pipe and vibration connector are in the table. All the units are ultrasonically cleaned and completely dried made suitable to refrigeration system Individual package of connector are remain under sealed plastic tubing. The maximum test pressure is 1.5 time of maximum operating pressure and minimum burst pressure is 5 time of maximum operating pressure. Copper tube end are designed as sweat connection for refrigeration tubing which have inner surface as per ASME B16.18 1.3 Installation conditions: Aeroflex vibration eliminator should be installed as close as possible to the compressor and end away from the source of vibration. Vibration eliminator should be installed perpendicular to the direction of vibration (in-line with the compressor crank shaft) Horizontal Vibration: Where source of vibration is only in the horizontal plane, a single vibration and noise eliminator may be installed. Best results will be achieved by installation at 90�° to the source which is normally the crank of the compressor in a horizontal plane. See fig. 1 Vertical / horizontal vibration: Where the source of vibration and noise is in both horizontal are in vertical planes. Best result will be achieved by installing two vibration eliminators at right angle to each other see fig. 2 Although the copper tube end of vibration absorber are attached by TIG welding (special alloy filler) during installing if unit is over heated there is not effect on the connector

Plastics jars & containers, plastics caps & closer, cosmetic products plastics packaging materials, food containers, personal care products plastics packaging items, all size plastics pots for plants, plastics household products, health care products plastic packaging items, plastics toys for kids, plastics molded indoor & outdoor sports items, usb cable c to c and a to c, power cord, wire harness, battery cable, ec charger connector with cable..

Medical cable, extrusion, cable, wire, connector, cable assembly, wire harness, pvc, hdpe, pp, ldpe, pcb, pcba, injection mold, injection molding, fixture, machining part, stamping part, tube, catheter, wire harness, release paper, release liner, flim, tape, silicone foam, sponge.Export and shipping

Vibrating Screens Vibrating screen manufactured in Spring steel or Stainless steel material and are used as filtration medium for sieving in a wide range of industries.

Product Description: We supply connector in SS201, SS304, SS316, SS316L suitable for pipes OD42.2mm*2mm. Also available other OD on requist. Connectors in round, square any other custom designed shape. Finish: satin, Glossy.

Power Connector Manufacturer Shenzhen Linko Electric Co., Ltd., founded in 2004, is a national high-tech enterprise integrating R&D, production, sales and service of industrial waterproof connectors. Specializing in the production of industrial connectors, waterproof connectors, circular connectors and other industrial connectors, as well as customized wiring harness products, and continue to provide high-end connectivity solutions and products for customers around the world. With R&D expertise, a fully equipped in-house test lab, and an excellent quality management system in accordance with ISO 9001, our industrial connectors meet the quality requirements for RoHs, CE, and UL approvals, which ensures a wide range of high-quality industrial connectors. As a professional industrial connector supplier, CNLINKO industrial connectors and all connector components promote electronic development, 3C products and other fields in various end markets, such as rail transportation, industrial automation, stage lighting, medical equipment, navigation, traffic monitoring, new energy vehicles, intelligent manufacturing, wind power and so on. M12 Connectors M12 connectors are circular, threaded electrical connectors commonly used in industrial and automation applications. These connectors are known for their robustness, reliability, and versatility. M12 connectors have a screw-locking mechanism that ensures a secure and vibration-resistant connection. M12 connectors are used in a wide range of applications, such as industrial sensors, actuators and other automation and control systems. They are well suited for demanding industrial environments due to their highly regarded durability, ingress protection (IP) rating, and resistance to environmental factors such as humidity and dust.

Y series vibrating screen is vibrated by the circling motion, its high efficient screen for filter materials into multiple grade according to the gravel size. For the compact structure and the convenient installation, it is the ideal screening device for prefilter of the feed materials before the primary crushing in the quarry site, it also can be used as separation and filtration solely. Vibrating screen adopts cylinder type eccentric shaft vibrator and partial block to adjust the amplitude. The materiel sieve drip line is long and more sieving specifications. The circular vibrating screen can also be used for production classifying in quarry, mine, construction, electricity, chemical industry,etc. Working principle Y series vibrating screen is mainly composed of screen box, screen mesh, vibrator, damping spring device, bottom frame and so on. The side plate of vibrating screen is made of high quality steel plate.It is connected with the beam and bottom seat of the vibration exciter with high strength bolts or ring slot rivets, and cylinder type eccentric shaft exciter and eccentric block are used to adjust the amplitude. Vibrator is installed on the screen box side plate to drive vibrator eccentric block produce high-speed rotation through v-belt by the motor so that could produce large centrifugal force to stimulate the screen box produce a certain amplitude of circular movement.The material on the screen is subjected to the impulse passed by the screen box on the titled screen surface and produces continuous throwing motion.So particles that are smaller than the screen hole pass through the screen so as to achieve classification when material enters the screen surface. Features & Benefits 1. Vibrating screen YA is of several decks whose moving track is round. 2. The moving track of material is very long; the size of material can be separated into several specifications. 3. It adopts cylinder style inspiring vibrator device and eccentric shaft to adjust. It has the features of reliable structure, strong vibrating generation, high screening efficient, low noise, easy maintenance, safe performance, etc. 4. It is widely used in separating gravel and is also suitable for mining, construction material, transportation, energy, chemical industry and so on.

Brass components ,brass precision part,brass cable glands, brass molding insert,brass stop plugs,brass ppr inserts,brass hardware, brass & metal nozzles,brass nipples, brass sanitary part,brass bush and brass products,brass anchors & fasteners, brass lock nut & check nuts & dome nuts, brass turned components,brass inserts, brass auto parts, brass threaded stud, brass forging components, brass forging metal turning parts, brass shower header wall bracket socket,brass electrical components,brass shower hinges pipe to glass connector,brass shower header clamp,brass knob,brass pipe bush,brass guide bush,brass parts,brass tuned components,brass and metal precision parts,brass,ms,ss elbow fitting,brass terminal box connector,brass tee,brass,ms,ss,aluminium stand off(spacers),brass&ms&aluminium &steel metal adapter,brass&ms & aluminium & steel precision turned components,brass & ms& aluminium & steel & metal nuts, bolts, washers, zinc (zamak,mazak) metal parts, brass & ms, ss, zinc, aluminium.Manufacturer & exporter

We supply balustrade and its related components like connectors, saddles, pipes end caps in SS201, SS304, SS316, SS316L. Pipes OD42.2mm*2mm. Also available other OD on request. Balustrade shape round, square any other custom designed shape. Height about 1060mm. Finish: satin, Glossy.

1> Shower Screen Connector / Shower Support Bar Bracket. 2> Glass thickness : 6 mm~12 mm 3> Size: 19mm / 22mm / 25mm Diameter. 4> Material : Solid Brass 5> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.

Our cjt connectors are in compliance with usa ul(e326732), canada csa, germany tuv, rohs safety standards approved. We believed that with our fast delivery, high quality and competitive price will bring values to your business and development.

Specifications Material Specification: Housing: High Temperature thermoplastics: LCP; Color: Black Contact: Phospor Bronze/Brass Shell: Brass/Phospor Bronze/SUS301 Plated: Contact: gold plated (G/F,5U"/10U''/15U''/30U'') Shell: Gold/Nickel Materials and plating can be changed according to customer definition. Mechanical Characteristics: 1,Insertion Force:35 N Max; 2,Extraction Force:10N Min(Initial) 3,Durability Life:50000 Times. Electrical Characteristics: Contact Current Rating:0.5 Amperes Dielectric Withstanding Voltage: AC 500V r.m.s Insulation Resistance: ¡Ý100M¦¸ Contact Resistance: ¡Ü100m¦¸ Operating Temperature:-25 oC - +85 oC Environmental Spec. Have passed below tests: 1.Salt Fog Test 2.AIR Reflow Soldering Test 3.Mechanical Vibration Test 4.Adhered Tin Test 5.Temperature Cycle Test. Application: Computer, MP3 player, MP4 player, digital video and camera, PADs, GPS,flash drive and cable ASSY. 1500PCS/Reel,6000PCS/Carton.

Connectors

Connector F connector 5000pcs:39x33x15cm

M3 to m12 size to choose Common export packing.