VIBRATION CONNECTORS MANUFACTURERS & SUPPLIERS
Stainless steel vibration eliminator:
Aeroflex Vibration eliminators are specially designed to absorb mechanical vibration and destructive force of noise which is transmitted by the compressor, and also eliminate the stresses linked with piping thermal expansion in refrigeration and air condition installation.
These connectors are TIG welded stainless steel hose with copper pipe, due to there is not any brazing so these connector bear more temperature as compared to brazed fitting
The main function of vibration eliminator is to absorb compressor vibration and stop its transition into pipe network, by isolating the vibration the risk of damage to pipe work and related component reduce,
1.1 Size range of vibration eliminator:
The comprehensive range of vibration eliminator are available from to 3 1/8 Outer diameter of copper tube, copper tube are comply a per ASTM B88 & ASTM B88M (water & general plumbing system) & ASTM B280 (air conditioners & refrigeration system)
1.2 Material specification:
Aeroflex Vibration eliminators are manufacture from EN 10028-7, Stainless steel SS 321 & SS 316L annular corrugated hose with SS 304 stainless steel braid.
All unit are brazed with copper tube, detail dimension of pipe and vibration connector are in the table.
All the units are ultrasonically cleaned and completely dried made suitable to refrigeration system
Individual package of connector are remain under sealed plastic tubing.
The maximum test pressure is 1.5 time of maximum operating pressure and minimum burst pressure is 5 time of maximum operating pressure.
Copper tube end are designed as sweat connection for refrigeration tubing which have inner surface as per ASME B16.18
1.3 Installation conditions:
Aeroflex vibration eliminator should be installed as close as possible to the compressor and end away from the source of vibration.
Vibration eliminator should be installed perpendicular to the direction of vibration (in-line with the compressor crank shaft)
Horizontal Vibration: Where source of vibration is only in the horizontal plane, a single vibration and noise eliminator may be installed. Best results will be achieved by installation at 90�° to the source which is normally the crank of the compressor in a horizontal plane. See fig. 1
Vertical / horizontal vibration: Where the source of vibration and noise is in both horizontal are in vertical planes. Best result will be achieved by installing two vibration eliminators at right angle to each other see fig. 2
Although the copper tube end of vibration absorber are attached by TIG welding (special alloy filler) during installing if unit is over heated there is not effect on the connector
Supplier: Switches, phone jack, DC jack, vibration motor and connectors
Supplier: Waterproof connector, sensor connectors waterproof, USB, circular, IEEE 1394, DSUB, RJ45, industrial Ethernet connectors, military standard connectors, UV resistant connectors vibration-proof, weatherproof, environment-proof connectors cable assemblies
Services: OEM & ODM designer, manufacturer & exporter of waterproof connectors
1.it is the waterproof connector 2.Accoring to the standard DZ4Q/RE008-84 3.Shell size:FQ14,FQ18,FQ24,FQ30 4.Contact:each shell size have diffrent pins Working temperature: -55 degrees Centigrade- +100 degrees Centigrade Relative temperature: Temperature is 40 degrees Centigrade, reach 93í+ 3% Vibration: Frequency 10-200HZ, acceleration 150m/s2 Collide : Acceleration 490m/s2 Permanent acceleration vibration: The acceleration reaches 245mm/s2 Atmospheric pressure: Reach 4.4KPa Mechanical life-span: 500 times The connector should be able to stand the test of 30 minutes but not enter water within the connector in water 1 meter deep
Product description: Dr18 module power connectors are special products for interface of module, completely replaceable with the same type products of elcon. The advanced technology crown spring is used in these connectors to enable high dynamic contacting reliability. This product parts are plated with silver or golden, the plug is installed with pin, and the socket is installed with jack. The optional termination styles including pressure welding(y), welding (h), and plate welding (pcb ). There three basic types provided for pins: postmate, standard, premate to satisfy the customers different requirements and we could make it according to per customer's requirement. Product feature: The product adopts advanced technology crown spring as contact, and used beryllium which has high flexibility and high intensity, it is smooth contact side, and avoids damaging when insert and extract, in the meaning time ensures largest contact size, the advantages of this connector is low resistance , small temperature rise. Endurance of vibration to shock and high dynamic contact reliability. Product specifications Contact materials: brass, beryllium, and gold-plated, silver-plated on surface. Housing materials: ge pbt 420seo (black) Mechanical endurance:,161;y1000times Rated current:20,5a¡ê,172;12,35a Contact resistance¡êo20,,161;¨¹5m|,184;¡ê,172;12,,161;¨¹1m|,184; Withstanding voltage¡êo20,,161;y1000vac, 12,,161;y2000vac Insulation resistance: 20,,161;y3000m|,184;, 12,,161;y3000m|,184; Available contacts: size ,20 ,161;¨¢ 11 contacts Size ,12 ,161;¨¢ 7 contacts Other information: If you are interested in our products or have some available suggestions, please feel free to contact us, thanks. According to standard requirements
Product features: Emitting color: red, yellow, blue, green, white and RGB full-color Easy to install by the 3m tape on the PCB back Low power consumption, high intensity and stability Long lifespan Easy connection with snap-in connectors Solid-state, high shock and vibration resistant No RF interference Long lifespan of 50,000 +hours Waterproof type SMD flexible strips and glue-dripping or sleeving treatment for the surface. Description: LED type: SMD 3528, 12V DC Length: 5 meter/reel LED quantity: 30 LEDs/m and 60 LEDs/m Power consumption: ¡Ü4.8W/m Cuttable every 3 LEDs IP rank: IP68 Package: 5 meters per reel Beam angle: 120¡ã Color temperatures: 470 to 8,000K Current: 0.4 and 0.8A Delivery detail: depends on order quantity. Applications: Applied to path and outline marks and advertising boards and more. Packaging detail: standard export carton.
Product features: Emitting color: red, yellow, blue, green, white and RGB full-color Easy to install by the 3M tape on the PCB back Low power consumption, high intensity and stability Long lifespan Easy connection with snap-in connectors Solid-state, high shock and vibration resistant No RF interference Long lifespan of 50,000 +hours Waterproof type SMD flexible strips and glue-dripping or sleeving treatment for the surface. Descriptions: LED type: SMD 5050, 12V DC Length: 5 meter/reel LED quantity: 30 and 60 LEDs/m Power consumption: ¡Ü14.4W/m Cuttable every 3 LEDs IP rank: IP68 Package: 5 meters per reel Beam angle: 120¡ã Color temperatures: 4,70 to 8,000K Current: 0.45 and 0.9A Delivery detail: depends on order quantity Applications: Applied to path and outline marks and advertising boards. Packaging Detail: Standard export carton.
Complete with power LED ( 50000 h). Very high light intensity 1212 lm, light colour 6500K daylight white. Beam spread 20° Max. Lighting distance: 68m / 1 Lux Protection degree IP69K. Dimensions: Ø 130mm, depth 50mm. Floodlight model DOX is distinguished by a monolithic aluminium die-cast body extremely robust and compact, containing 12 led chips housed in a sealed, waterproof and maintenance free, compartment. The body is mounted on a steel fixing bracket through a coil, helping absorption of vibrations and also allowing small aiming adjustments. Most relevant peculiarity of model DOX is the ability to operate under a really flexible supply ranging from 9V to 30V DC allowing use with batteries, small generators and also in combination with solar photovoltaic panels. The floodlight is well apt for lighting tasks on boats and and industrial vehicles with a power consumption of only 18W and a powerful light beam. Use: DOX is a led work light with a great efficiency and minimal power consumption requiring a very low voltage power supply and with an high IP69K protection degree. DOX is an ideal floodlight for use in all motor vehicles both civil (boats, cars, camper vans...) or industrial (ships, cranes, earth moving machines, bulldozers, fork lifts...) and, able to function with a flexible supply range from 9 to 30V DC that allow usage also with energy coming from photovoltaic solar panels. DOX peculiarities allow a secure use in all situations were electrical safety needs require or suggest to employ low voltage. Usage of power led sources with a lifetime rated for more than 50.000 hours and very high efficiency makes DOX a searchlight of relevant performance. The floodlight employs 12 1,2W monochromatic cool white leds, with a colour temperature of about 6500 °K, for a total power of 18W. DOX also guarantees a limited surface temperature and a cold emitted light beam, with absence of U.V. emissions. On demand DOX can be supplied for use at line voltage (220/240 V). In such case is required an external 350 mA constant current power supply to be set separately, as the waterproof model available as an accessory. Construction: die-cast aluminium body and antiscratch coated polycarbonate protection screen. DOX is also equipped with a cable tail and a malefemale couple of waterproof connectors for a quick power connection. The floodlight is supplied hermetically sealed as no maintenance is required.
Signal application KK 254 connectors are ideal for use in industries such as automotive, medical, and consumer, delivering up to 5.0A and 250V per circuit in a 2.54mm centerline pitch. Dual-cantilever terminals offer a square-post contact area that interfaces with the male pin header through a spring-like contact. Available in 22 to 30 AWG wire, an optional box-style dual-cantilevered terminal is optimal for high-vibration applications.
Supplier: 1. finished steel product (steel plate, hot rolled, cold rolled coil, steel profile, hot galvanized coil, etc.)
2. wind power energy product
wind tower internals
fasteners, flange, service lift parts, mechanical fabrication, forging, casting parts, gal platform,
tower light accessories. aluminum platform and ladder and accessories, safety devices. steel handrail and ladder
power and control cable, fiber and optical cable, cable assemblies, fiber glass.
fan heater, nacelle fan, led light, vibration monitor, axial blowers.
current transformer, slip ring, heavy duty connectors, winch, portable crane, ups, lead and acid battery, reactor, converter, cooling system, enclosure, insulation blankets and covers heating blanket
3. wind, solar & all types of renewable energy products and its components.
Buyer: Manganese ore, manganese-rich slag, chromite ore, steel scrap, coke.