Product Description: Flow tube is mainly used in vacuum infusion and prepreg process, feeding channel for resin. Resin infusion hose : It is made of PE and used to provide a very freeâ??lowing channel through which the resin is distributed near the point where the resin is first fed into the composite. Spiral hose : Resin flows freely through the center of the spiral tube, but just as easily out of the spirals in the side, allowing resin to be supplied all the way along an edge of the composite. 1.The best way to select a tube is to first decide which materials are chemically suitable, and then choose the one which best meets the physical demands of the application. 2.For maximum tube life, use a large bore tube at low speed. For maximum flow rate use the largest tube at maximum speed. For maximum accuracy, use a small bore tube at maximum speed. 3.Suction lift depends on the tube restituting fully before the advance of the next roller. If it does not, the flow rate will be reduced. For maximum suction lift or pressure, use the smallest practicable bore size of tubing and run the pump at the slowest possible speed. Product Specifications: FT12: PE, ID10mm*OD12mm, 80 Celsius, 200m/rolls; FT12: PP, ID10mm*OD12mm, 120 Celsius, 200m/rolls; FT16: PE, ID13mm*OD16mm, 80 Celsius, 200m/rolls; FT16: PP, ID13mm*OD16mm, 120 Celsius, 200m/rolls; FT20: PE, ID17mm*OD20mm, 80 Celsius, 200m/rolls; FT20: PP, ID17mm*OD20mm, 120 Celsius, 200m/rolls; Product Features: *Low material cost. *PE material, strong tube wall makes the spiral tube not deformed under atmospheric pressure. Packaging Information: The fabric is wound on a paper tube, then packing by plastic film, warp by Bubble film ,Place the pallet horizontally or pack it in a carton and then pallet it. The pallet and the goods are packed with packing tape, and then wrapped around the stretch film. Storage Method: Stored in a cool and dry place, and make sure not directly touch the ground or wall to avoid moisture. Do not remove the original packaging when store. Scenes To Be Used: Vacuum processing for industry
I.V. Fluid Infusion Set with Flow Regulator Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: Tube length-200cm Description Designed to control flow rates from 5 ml/hr. â?? 250 ml/hr. manually. Sharp, spike for easy insertion. Roller clamp for regulating fluid flow rate. Self-sealing latex bulb for drug administration. Disposable, sterile and non-pyrogenic.
Non Vacuum Blood Tube Item GDN050EK3, Specification: 5ml EDTA K3 Non-vacuum blood collection tube, Green cap, Item GDN050EK2, Specification: 5ml EDTA K2 Non-vacuum blood collection tube, Green cap, Item GDN050A, Specification: 5ml Plain Non-vacuum blood collection tube, Red cap, Item GDN050CA, Specification: 5ml Clot Activator Non-vacuum blood collection tube, Red cap, Item GDN050SP, Specification: 5ml Fluoride Oxalate Non-vacuum blood collection tube, Yellow cap, Item GDN050LH, Specification: 5ml Lithium Heparin Non-vacuum blood collection tube, Dark Blue cap
Guar Gum Types Food, Feed & Pharma Grades - Various particle sizes (very coarse to very fine). - • Various hydration rates (very slow to very fast). - • Various viscosities (1% solution in water = 50 cps to 7000 cps). - • Special deodourised grades. - • Special low microbiological count grades. Technical Grades Straight Guars: - Various particle sizes (very coarse to very fine). - Various hydration rates (very slow to very fast). - Various viscosities (1% solution in water = 50 cps to 8000 cps). - Special good Dry-Flow (Free-Flow) Guars. - Special Anti-Dusted Guars. Modified Guars and Guar Derivatives: - Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing), - Borated. - Reticulated. - Oxidised. - Depolymerised. - High water absorbance capacity. - Carboxymethyl (Anionic). - Hydroxypropyl (Nonionic). - Hydroxypropyltrimethyl chloride (Cationic). - Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative). - Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives. - Special Anti-Dusted Modified Guars / Guar Derivatives. Guar gum is a fiber from the seed of the guar plant. Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis). In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent. In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams. How does it work? Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines. There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite. USES: Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days. High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides. Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes. Constipation. Irritable bowel syndrome (IBS).
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
I.V. Infusion Set Vented/Non-Vented (with Y Connector & Luer Lock) Product Code: MED 163 Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: 21 G vein Needle, Tube Latex, 2.7 x 1500 mm pvc tube Description Is sharp and easy to puncture. Connector fixes to each type of spike and connector. The IV infusion set for roller clamp is superior control of the flow rate. The end of set can be optional to Luer lock or slip. Molded Drip Chamber. Disc Filter in the drip chamber. Flow rate = 20 drops/ml Disposable infusion set for Standard sterilized package. Available in Both Tube Latex as well as Bulb Latex. Option Available : Needle Free Y Site and Needle Free Connector
I.V. Infusion Set Vented Product Code: MED 162 Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: 21G vein needle, Bulb Latex, 2.7 x 1500 mm pvc tube Description In-built Air vent Molded Drip Chamber Extra soft-Kink resistant tube Molded Latex Bulb for Extra Medication 6% Taper Luer as per international standards. Accurate flow control. Disc Filter in the drip chamber. Flow rate = 20drops/ml Available in Both Tube Latex as well as Bulb Latex. Option of Luer Lock and Luer Slip needle available
1. lighting products: * indoor luminaires (including led bulb, led tube, led panel, led slim panel, led batten, led ceiling, led cross and linear light, led high bay, led parking, led downlight, led track light); * outdoor luminaires (including led flood light, led solar flood light, led street light, led solar street light.) * led grow lights (a variety of professional grow lights for dragon fruit, chrysanthemum, medicinal plants, ginseng, tomatoes, strawberries, grapes, watermelons, cantaloupe, bell peppers, orchids, vegetables, algae, etc.); * fishing lights (including on boat lights and underwater lights); 2. kitchenware products: vacuum flask, water bottle, electric kettle; electric blender, rice cooker, glass liner and accessories..Manufacturing, export and import, transport, and odm/oem services for all of the products.
Golden Vac plasma blood collection tube promises to provide non-polluting and non-differential original blood specimen for medical test. After centrifugation, plasma can be separated from blood cells effectively. Plasma tube includes 5 kinds of tubes: Clotting Tube with blue cap, Heparin Tube and Gel & Heparin Tube with green cap, Compound of Sodium Fluoride and Anticoagulant Tube with grey cap, Gel& EDTA Tube with lavender cap. Coagulation Tube Coagulation Tube aims to obtain plasma specimen for coagulation function test, it contains buffered Sodium Citrate solution with the concentration of 3.2% �¯�¼?0.109 mol/L�¯�¼?. The mixing ratio of blood to Sodium Citrate is 9:1. This anticoagulant is sustained and stable, it strictly control the microbial limit, making sure the APTT test under the excellent condition. Item GD018SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 1.8ml Item GD027SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 2.7ml Item GD036SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 3.6ml Item GD045SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 4.5ml Item GD018SCD , Specification Blue cap, Coagulation, 3.2% Double wall 13*75mm, 1.8ml Item GD027SCD , Specification Blue cap, Coagulation, 3.2% Double wall 13*75mm, 2.7ml Coagulation Tube ( Glass Only) Item GD018SC-F , Specification Blue cap, Glass tube, Coagulation, 10.25*64mm ( flat bottom) , 1.8ml Item GD027SC-F , Specification Blue cap, Glass tube, Coagulation, 10.25*64mm ( flat bottom) , 2.7ml
Serum Blood Collection Tube Golden Vac serum blood collection tube promises to provide non-polluting and non-different original blood specimen for medical test. After centrifugation, serum can be separated from blood cells and fibrin effectively. Serum tube includes 3 kinds of tubes: 1. Plain Tube with red cap, 2. Pro-coagulation Tube with red cap, 3. Gel&Clot Activator Tube with yellow cap Plain Tube aims to obtain serum specimen forbiochemistry, immunology and serology tests in clinical inspection. Its main merit is that serum separate out of blood cells and fibrin naturally, so its physico-chemical properties are keeping nonpolluted. The intact serum is suitable for a wide range of laboratory operation, routine clinical chemistry, immunology and serology. Item No . GD020A , Specification Red cap, Plain, 13*75mm, 2ml Item No . GD030A , Specification Red cap, Plain, 13*75mm, 3ml Item No . GD040A , Specification Red cap, Plain, 13*75mm, 4ml Item No . GD050A , Specification Red cap, Plain, 13*75mm, 5ml Item No . GD060A , Specification Red cap, Plain, 13*100mm, 6ml Item No . GD070A , Specification Red cap, Plain, 13*100mm, 7ml Item No . GD090A , Specification Red cap, Plain, 16*100mm, 9ml Item No . GD100A , Specification Red cap, Plain, 16*100mm, 10ml Item No . GD090AR , Specification Rubber stopper, Plain, 16*100mm, 9ml Item No . GD100AR , Specification Rubber stopper, Plain, 16*100mm, 10ml
Whole Blood Collection Tube Golden Vac whole blood collection tube promises to provide non-polluting and non-differential original blood specimen for medical test, does not require separation of plasma or cells. It includes 2 kinds of tubes: EDTA Tube with Purple cap, ESR Tube with black cap. EDTA Tube is widely used for clinical haematology test, especially for routine blood examination. Our automatic sampling instrument finely and accurately spray additives onto the interior tube wall, to ensure the mixing speed and the anticoagulation effect. EDTA Tube is very convenient to use for it can be directly put on the analyzer to detect without openning the cap. Item GD020EK3 , Specification Purple cap, EDTA K3, 13*75mm, 2ml, Item GD030EK3 , Specification Purple cap, EDTA K3, 13*75mm, 3ml, Item GD040EK3 , Specification Purple cap, EDTA K3, 13*75mm, 4ml, Item GD050EK3 , Specification Purple cap, EDTA K3, 13*75mm, 5ml, Item GD060EK3 , Specification Purple cap, EDTA K3, 13*100mm, 6ml, Item GD070EK3 , Specification Purple cap, EDTA K3, 13*100mm, 7ml, Item GD080EK3 , Specification Purple cap, EDTA K3, 16*100mm, 8ml, Item GD090EK3 , Specification Purple cap, EDTA K3, 16*100mm, 9ml, Item GD0100EK3 , Specification Purple cap, EDTA K3, 16*100mm, 10ml, Item GD080EK3R , Specification Rubber stopper, EDTA K3, 16*100mm, 8ml, Item GD090EK3R , Specification Rubber stopper, EDTA K3, 16*100mm, 9ml, Item GD0100EK3R , Specification Rubber stopper, EDTA K3, 16*100mm, 10ml, Item GD020EK2 , Specification Purple cap, EDTA K2, 13*75mm, 2ml, Item GD030EK2 , Specification Purple cap, EDTA K2, 13*75mm, 3ml, Item GD040EK2 , Specification Purple cap, EDTA K2, 13*75mm, 4ml, Item GD050EK2 , Specification Purple cap, EDTA K2, 13*75mm, 5ml, Item GD060EK2 , Specification Purple cap, EDTA K2, 13*100mm, 6ml, Item GD070EK2 , Specification Purple cap, EDTA K2, 13*100mm, 7ml, Item GD080EK2 , Specification Purple cap, EDTA K2, 16*100mm, 8ml, Item GD090EK2 , Specification Purple cap, EDTA K2, 16*100mm, 9ml, Item GD0100EK2 , Specification Purple cap, EDTA K2, 16*100mm, 10ml, Item GD080EK2R , Specification Rubber stopper, EDTA K2, 16*100mm, 8ml, Item GD090EK2R , Specification Rubber stopper, EDTA K2, 16*100mm, 9ml, Item GD0100EK2R , Specification Rubber stopper, EDTA K2, 16*100mm, 10ml, Item GD035EK3G , Specification Purple cap, EDTA K3 + Separate Gel , 13*75mm, 3.5ml, Item GD060EK3G , Specification Purple cap, EDTA K3 + Separate Gel , 13*100mm, 6ml, Item GD085EK3RG , Specification Rubber stopper, EDTA K3 + Separate Gel , 16*100mm, 8.5ml, Item GD085EK3G , Specification Purple cap, EDTA K3 + Separate Gel , 16*100mm, 8.5ml,
Capacity: 2L; Heat retention after 6h >= 78 C; Body: 304 stainless steel/ tinplate material, customized patterns and colors; Lid: Polypropylene material, integrated with stopper and LED temperature display; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: portable; Glass refill: high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 �°C; Body: Tinplate material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1.1L; Heat retention after 6h >= 78 �°C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, handle included; Bottom: PP Plastic material, skid resistance, easy to disassemble. Two removable food trays for keeping food separately; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: Wide mouth, high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1.3L; Heat retention after 6h >= 78 �°C; Body: Stainless steel/Tinplate material, customized patterns and colors; Lid: PP Plastic/ABS/PC material, just press the button to get water, temperature display (optional); Bottom: PP Plastic/ABS material, skid resistance, easy to disassemble; Glass refill: Wide mouth, high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1.8L; Heat retention after 6h >= 78 �°C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, just loosen to get water without disassembling; Bottom: PP Plastic material, skid resistance, easy to disassemble; Glass refill: Wide mouth, high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 3.2L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: Aluminum and cork material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 C; Body: Tinplate material, customized patterns and colors; Lid: Aluminum material; Stopper: Aluminum and cork material, easy to handle; Bottom: Aluminum material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted
