Two Sided Applicator Bevs 1802 Suppliers and Manufacturers

Material: high carbon spring steel, spring steel, stainless steel, alloy steel Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm Torsion spring wire diameter :0.2-35mm Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution. Extension spring hook include Germany hook, British hook, Side hook We can customize special design of springs based on your requirement.

Commodity : Soda Ash Light / Dense Molecular formula:na2co3 Molecule weight:105.99 H.S Code:28362000 Cas: 497-19-8 Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air. Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry. Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers Specifications standard : gb210.1-2004 Items : specification First grade : specification Second grade Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min Chloride content(as nacl) %0.7% max0.9% max Iron content(as fe in dry base) /%0.003% max0.0035% max Sulphate content(as so4 in dry base) /%0.03% max0.03% max Water insoluble matter /%0.03% max0.03% max Loss on ignition a/ %0.5% max0.5% max

Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months

WATER HYACINTH OTTOMAN CHAIR Add a new element of functionality to any living space with this gorgeous woven ottoman. This ottoman is the perfect size to function as a footrest for any accent chair, or can even function as a stand for photo frames, a tray or decorative items. This multi-functional ottoman is also a great easy solution for extra living room seating while guests are over, and can even be used as an end/side table next to a chair or sofa. The gorgeous weave on this ottoman, rich in color and made with the utmost craftsmanship will be a guaranteed stunning addition to any room. With two timeless shape choices, round and square, you are sure to find your perfect fit.

Type: Pet Cages, Carriers & Houses Item Type: Soft-Sided Carriers Material: Rattan Commercial Buyer:mSpecialty Stores, TV Shopping, Super Markets, Discount Stores, E-commerce Stores, Gifts Stores Occasion: mPresents Season:mSummer, All Seasons Room Space: Living Room Cage, Carrier & House Type: HOUSES Application: Small Animals Feature: Breathable, Sustainable, Stocked Place of Origin: Vietnam Brand Name: 99 GOLD DATA Model Number: Selena +84 587 176 063 Product name: Pet nest Main material: Cane Color: Picture Shows MOQ: 1000pcs Delivery time: 7-15 Days Sample time: 5-7working Days OEM&ODM: Accpeted Port: All port in Vietnam Size: S M L Package Type: Environment friendly poly bag per piece, OR according to customer's request

METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Magnesia Bricks Description Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application. Magnesia Bricks Features: It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature. Magnesia Bricks Application Basic open-hearth furnace for steelmaking Electric furnace bottom and wall Permanent lining of oxygen converter Non-ferrous metal metallurgy furnace Hyperthermia tunnel kiln Lining of rotary cement kiln Heating furnace bottom and wall Regenerative chamber of glass furnace Magnesia Bricks Properties High Refractoriness Good alkaline slag erosion resistance High apparent initial softening temperature Good thermal conductivity High thermal expansion Magnesia Bricks Manufacturing Process Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.

* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS 1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes. 2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to the pasteurized milk and stir slowly to ensure full dissolving at 80C. 3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the temperature at 70�° C. 4. Keep Slow stirring for complete separation of solids and whey. (Indication: Whey will turn to light green color and small lumps of solids will settle down) 5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer. 6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop. 7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then dip in chilled water for 4 hours. DOSAGE Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need to be used.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine,1row ,2row customized 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world Keywords : Tortilla Taco Chapati Roti Roasted duck bread thin bread making machine Tortilla Taco Chapati Roti Roasted thin bread making machine

Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world Keywords : Tortilla Taco Chapati Roti Roasted duck bread thin bread making machine Tortilla Taco Chapati Roti Roasted thin bread making machine

Mexico Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world

Hot eye Onion Peeling Machine Automaitc onion peeling machine with onion root cutting in-one-machine 1 The whole process of onion from feeding, peeling, peeling, root cutting, output and other processes is automated and unmanned, which can save a lot of labor costs. 2 Peel by layers, either more or less. The equipment is designed with a cortex controller, which can be peeled as required. Only one layer of skin can be peeled, or two or three layers of skin can be removed. 3 The peeling is clean and effective. The peeled scallions are clean and good in appearance. 4 The root cutting part is equipped with an onion size recognition mechanism, and the size of the cutting amount can be adjusted randomly to avoid the disadvantage of cutting large onions into small ones and small ones into large ones. 5 Small size, high yield. The equipment design strives to reduce the volume on the premise of increasing the output, so as to apply to various application scenarios such as large, medium and small enterprises and small family workshops.

JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver, JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages SUPMIROR offer more solutions for building faÃ?§ade and interior decoration. SUPMIROR without paint content, more environment friendly SUPMIROR is easy for processing with tempering, laminating, curving and acid etching. JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside, to transform and decorate rooms, to increase the feeling of space.   Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design, with various colour choice, easy to clean, bring more space in modern life. Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side, can be used on door

JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver ,JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages �?�??�?�?�?�¬SUPMIROR offer more solutions for building facade and interior decoration . �?�??�?�?�?�¬SUPMIROR without paint content, more environment friendly �?�??�?�?�?�¬SUPMIROR is easy for processing with tempering ,laminating ,curving and acid etching . JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside , to transform and decorate rooms, to increase the feeling of space. Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design , with various colour choice ,easy to clean, bring more space in modern life . Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side,can be used on interior decoration.

Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort   Component : 1.Ã? Glass items:Ã? consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.Ã? Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.

POM Regrind from zipper Teeth, industry lump, industry runner Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts. One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc. MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner CATEGORY: POM TYPE: Regrind SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days