1. 20-250VAC/VDC universal power supply
2. Solid-state or relay output
3. Compact or standard units
4. No calibration required
5. Explosion proof units available
6. Mini, standard and extended probe versions
Explosion proof typed tuning fork level switch, d ii ct6
Fundamental principles
The su-yc vibrating probe level switch/liquid level control switch is a kind of universal liquid level switch, which is brought to its resonance frequency by means of piezoelectric crystals drive. If the tuning fork is covered by liquid or solidity, this frequency will change. The electronics of the su-yc monitor the resonance frequency and then output a switching value, in this way, to alarm and control the liquid level.
The structure and characteristics of tuning fork liquid level switch make it can replace any level switch of other principles, and can be widely used in building materials, petroleum, chemical industry, light industry, metallurgy field to alarm or control the height of liquid level for their lower and upper limit.
Qualification
Power supply: ac 110v/ac 220v 50hz / dc 24v
Operating temperature: fork: -30-150¡ãc
Instrument:-30-70¡ãc
Operating pressure: ¡ü2mpa
Fluid density: 0.6g/cm3 (in minimum)
Action point: vertically insert into water about 25mm
Start up time: about 3 sec
Response time: about 1 sec
Output style: one or two sets of relay contact (ac 220v/3a, dc 30v/ 3a)
Output delay time: 1-20sec, can be adjusted
Sensitivity: 10 grades can be set
Consumption: ¡ü1w
Process connection: r 1 taper pipe thread or others.
Leader tuning fork level limit switch ld-yc-yg
Free from service
Against high pressure and corrosion
Suitable for both solid and liquid media
No mechanical parts, free from service
Each item is carefully polished to a naturally smooth finish in our organic bamboo cutlery set, which includes a knife, fork, and spoon. They won't scratch dishes or leave a mark, unlike other unconventional cutlery.
This set of reusable spoons, knives, and fork is ideal for everyday usage, picnics, and other outdoor activities. These bamboo tools are light and robust and will withstand a lot of usage and damage.
The 80X series sensor is a 26G high frequency radar level measuring instrument with a maximum measuring distance of up to 80 meters. The antenna is further optimized, and the new type of microprocessor can be used for higher speed signal analysis and processing, so that the instrument can be used in some complex measuring conditions, such as reactor, solid silo and so on.
2.principle
The radar level antenna transmits narrower microwave pulses, which are transmitted downwards through the antenna. When the microwave touches the surface of the measured medium, it is reflected back and received again by the antenna system, which transmits the signal to the electronic circuit and automatically converts it into a bit signal (because the microwave propagates very fast, The time it takes for an electromagnetic wave to reach the target and return to the receiver through reflection is almost instantaneous).
NYRD 807
For use: sanitary liquid storage containers, strongly corrosive containers
Measurement range: 20 m
Process connections: flange
Medium temperature:-40 �°C 150 â??
Process pressure:-0.1~0.1MPa
Fine degree: equal to 3 mm
Level of protection: IP67
Frequency range: 26GHz
Explosion proof grade: Exia C T6 Ga/Exd ia IIC T6 Gb
6GHz intelligent radar level gauge is suitable for non-contact continuous measurement of liquid, slurry, granular and bulk materials. It is suitable for temperature, pressure change, inert gas and volatilization.
The measurement method of microwave pulse is adopted, and it can work normally in the range of industrial frequency band. Low beam energy, can be installed in a variety of metal, non-metal containers or pipes, no harm to the human body and the environment.
Application:Simple corrosive liquid in the process
Skyline:PTFE
Measuring range: 20 meters
Frequency range: 6.8GHz
Accuracy: 0.1%FS
Medium temperature: -40 to +130 °C
Process pressure: -0.10.3Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4...20mA/HART (two lines/four lines)/ RS485/Mod bus
Process connection:Thread
Protection level: IP67
Explosion-proof grade: Exia IIC T6 Ga
Guided wave radar level gauge adopts advanced microwave processing technology and unique Echo Discovery echo processing technology. Contact measurement has high accuracy and more accurate measurement. At the same time, guided wave radar is anti-adhesion, not affected by external environment such as medium temperature and adhesion.
The 70X series guided wave radar level gauge is suitable for various complex working conditions and application occasions due to various process connection modes and detection components. For example, high temperature, high pressure and low dielectric constant medium, etc.
Using pulse mode, the product can be installed in all kinds of metal and non-metal containers with very low emission power, which is harmless to human body and environment.
3. Technical parameters
Application:Liquid, Powder, Solid particles
Antenna material:304/PTFE/Flexible cable
Measuring range: 30 meters
Frequency range: 1.8GHz
Accuracy: ±1mm
Medium temperature: -40 to +130 °C;-40 to +250 °C
Process pressure: -0.1ï½?4.0Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4...20mA/HART (two lines/four lines)/ RS485/Mod bus
- Please note, as these are a natural product, the fork you receive may differ slightly to the one pictured.
- Care for your coconut wood cutlery by lightly oiling them regularly. You can use coconut oil or any other natural oil of your preference.
Origin: Vietnam
Material: Wood Coconut
MOQ: 500 pcs
Led lights, automotive led lights, led working light,jeep light, led strips,neon lights and other electronic products like switches, connectors,harness, usb car charger,fuses and so on..
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
High-quality wooden spoon, 12 inches long, handcrafted from durable natural hardwood (such as oak and maple), eco-friendly. Comfortable handle, spoon head is 2.5 inches wide, ideal for stirring, mixing, serving. Won't scratch your pots, heat resistant, non-reactive with acidic foods. Smoothly polished, coated with food-safe mineral oil, easy to maintain (hand wash, dry). Simple, elegant, suitable for any kitchen.
