Roller-Ball-Roller-Thrust button/Sealed Bearing,Weight on bit: 5880-11770N/cm;Rotary speed:50-80RPM,Spherical inserts on gage and inner rows. Designed for effective drilling in hard and abrasive formations with high compressive strength such as granite,basalt,hematite,magnetite,etc.Application:46000-56000Psi
Api 9 7/8 hj437g new tci tricone bits/tungsen carbide insert bit/rock bits/tricone rotary drill bit for well drilling
I-product specification:
Bearing type: sealed journal
Sealed type: mental sealed bearing
Hydraulic design: 3 nozzles with snap rings
Pin connection: 6 5/8” api regular
Approx. Weight: 60 kgs
Condition: 100% new with original packing and documents
Moq: 1 piece, we have enough stock for normal sizes
Brand name: kingdream
Packing: wooden case for export
We have enough stock, we can ship to you by sea or air within 3 days
1.Tighten the bits when screw on.
2.When the bit lower down to the bottom ,
Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling.
3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay.
4.When drill jammed, withdraw first, should not to force the rig start.
5.Drill could not without water, to ensure that the bit will be too hot.
6.Use the bits in right order , big size first, then small one .
9 be used for water well, oil field, underground, construction, geothermal, directional boring
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
435 Tci Rotary Tricone Bit Iadc745 310Mm Suppliers
Short on time? Let Tci Rotary Tricone Bit Iadc745 310Mm sellers contact you.
9 be used for water well, oil field, underground, construction, geothermal, directional boring
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
Brief introduction
Size
12 1/4'' (311.1mm)
Iadc
517
Bearing type
Sealed bearing
Thread connection
6 5/8 reg pin
Wob(kn/mm)
0.35~1.05
Rpm(r/min)
120~50
Make up toqure(kn.M)
46.1~54.2
Weight(kgs/pc)
278
Color
Customized
Packing
Plywood box(free-fumigation)
Industrial standard
Sy/t5164
Moq
1 pc
Payment terms
T/t, western union, and l/c are acceptable
Applications
Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc.
Note:other size and iadc is avaiable
The 437 tci bits are used to drill low compressive strength very soft formation tci bits maximize
the use of both conical and chisel tungsten carbide inserts of large diameters and high projection.
This cutting structure design combined with maximum cone offset ,results in high bit penetration
rates.the deep intermesh of cutter rows prevents bit bailing in sticky formations.
TCI 517 medium formation TCI Tricone bits
The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows this
design provides a fast drilling rate and added cutting structure durability in medium to medium
hard formations the HSN rubber o-ring provides adequate sealing for bearing durability.
TCI 617
TCI tricone bits 617 features robust chisel tungsten carbide inserts on the heel row and conical
on the inner rows .this design provides a fast drilling rate and added cutting structure durability in
medium to medium hard formations . the HSN rubber o-rin provides adequate sealing for bearing durability .
TCI 637 can be used to drill hard and abrasive formations
wear –resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge.
maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.
Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits.
Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field,
Construction, Geothermal, Directional Boring, and Underground Foundation work.
1) Condition: 100% new
2) Manufacturer brand name: GREAT
3) The bit size: 2 7/8" - 36"
4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc.
5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing.
6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing.
7) Nozzle quantity and nozzle size: 3 nozzles.
8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.
1.Brief introduction
We are a professional company in supplying tricone bits, steel teeth bits, single cone bits, and pdc bits.
Bits sizes range from 3 1/2" to 26".And cover almost all iadc codes.It can be used in various of different fields, mining, hydrology, subterranean heatpilling, water well drilling and oil well drilling.
This type of bits have optimal bearing design, it can be working stably in high wob, and the qualtiy
Tungsten carbide inserts on cone and the gauge make a good wear resistance largely extend the
Working life of bits.It is suitable for medium to hard formation.
2.Advantage
1.High-strength, high flexibility, high temperature, high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.
12 1/4" TCI bit
Size: 12 1/4" IADC code:517
Sealed Type: Rubber sealed Thread:6 5/8"reg pin
WOB(KN/mm):0.7~1.20 RPM(r/min):70~40
Make up toqure(KN.M):16.300~21.700 Weight(kgs/pc):105
Color:Blue, red, green or Customized Packing:Plywood box(free-fumigation)
Industrial standard:SY/T5164 MOQ:1 PC
Payment terms: T/T,Western Union,and L/C are acceptable
Applications:Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc.
Note:other size and IADC is available
Model Number:417,517,617 ,437,537,637,117,217
Type: rock bit cutter
Material:Tungsten Carbide
Use: Well Drilling
Formation:soft to hard formation
Usage:Produce /replace hole opener cutters
Bearing type: journal bearing
Sealed type:metal sealing /Rubber seal
Teeth type: insert button or milled tooth,saw tooth
Name:Tci rock bit cutter
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium Oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
6.Advantage:
1. High-strength, high flexibility, high temperature and high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.
API-7-1 Standard rock bit tricone bit TCI Tricone Bits inserted tooth
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques
2.Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.
3.Bearing Structure
High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.
4.Seal and Lubracation
Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.
5.Six-Point Position stabilzation Structure
The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.
6. Product Application
It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells.
Tricone Roller Bits
All sizes and IADC codes of drill bits are available. Special requirements of different models can be customized.
1)Main features
1. Cutting Structure of this type sealed and non-sealed tci tricone bits:
The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
2. Gauge Structure of this type tci tricone rock bits:
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3. Bearing Structure of this type tci tricone rock bits:
High precision roller bearing with two thrust faces. Ball lock the cone. Thrust faces hardface with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved.
For more info:
www.crossingbit.com
Hebei Crossing Drill Bit Manufacture CO.,LTD
1.
The water circulation, elastomer&mental-face sealed roller bearing tricone bit .
2.
Sy/t5217-2000 and api spec7-1 standard;
3.
Gauge protection extend period of using life
ons for water well and oilfield
7.
The size range from 3 7/8 to 22.
Our tricone bits can be devided into two series: steel tooth tricone bit (mill tooth tricone bit) and TCI tricone bit (tungsten carbide tricone bit), both of which are used for mining, piling, water well drilling and oil well drilling.
Our tri-cone bits are of American style and we process our products strictly according to API standard and ISO9001-2001 quality controlling certificate, that can ensure you of our offering good quality products.
Product Specification/Models: various sizes and styles
Steel tooth tricone bit: IADC 127, 126, 117, 216, 125, 215, 311
TCI tricone bit: IADC 517, 527, 537, 547, 617, 515, 525
Application: for water well drilling, oil well drilling, mining, piling.
We specializes in drill bits, drill pipe, Mud pump and stabilizers for water well, oil field, construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the best quality products at the lowest possible price.
We are professional supplier of new and used(rebuilt) drill bits used for oil filed, water well. Including tricone bits,PDC bits and drill pipe. Various of model and dimension available. Good condition and reasonable price.
Product Description: Steel teeth Bits
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
Medium hard with high compressive strength and hard streak (hard shale ,sandstone , limestone, etc.)
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
Plywood case or according to the conform order.
435 Tci Rotary Tricone Bit Iadc745 310Mm Suppliers
Short on time? Let Tci Rotary Tricone Bit Iadc745 310Mm sellers contact you.
