Steel Reinforcing Mesh Suppliers and Manufacturers

Steel Reinforcing Mesh Roll is used to provide tensile strength and crack control to structural concrete elements. Steel reinforcing mesh is the thin ribbed wire that can be make rolls presentation. Advantages to save more than 33% of steel, reducing costs 10% -30%; increase the speed of construction can shorten the duration of about 80%; to improve the quality of engineering structures, and concrete bonding anchoring reliable, smooth reinforcement bond strength equal to three times more, and the overall good, deviation is small, anti - cracking performance above 75%. Application Retaining and shear walls Beams and columns Concrete paving overlays Precast concrete elements Suspended floor slabs Swimming pool and gunite construction size(mm) 2.8-5.3 Reinforcement spacing(mm) Longitudinal wire 50-200mm Cross wire 30-1000mm Sheet size Length 2-50m Width 1-1.3m Mechanical and process property Meet GB/T1499.3-2002 standard;AS/NZS 4671; 2001,BS 4483:2005,A185-02

Welded Wire Reinforcement (WWR) provides the exact size of reinforcement where needed through variable bar size and spacing, thereby reducing steel waste. Plain Square Mesh sheets are a multi-purpose mesh and complies with AS/NZS 4671 : 2001 Steel reinforcing materials. Plain Square Mesh sheets are available in 6 x 2.4 m. Associated standards: AS/NZS 4671 : 2001 Steel reinforcing materials Application: Welded Wire Reinforcement can be used for: Slab on Grade reinforcement Floor and Walls Systems Topping Slabs Architectural precast wall panels Tilt-up construction wall systems Shear walls Retaining walls Mechanically Stabilized Earth (M.S.E.) reinforcement

Reinforcement steel mesh was welded by automatic electrical resistance welding machines conformance to standard AS-NZS 4761-2001. The material of reinforcement steel mesh is 250N, 500N, 500L, 300E, 500E. Reinforcement steel mesh is very poupular in civil engineering and construction. It always used on road subgrade, building foundation, tunnel support and reinforced,mine and coal reinforced and support, bridge construction etc. During construction works, It is not only increase our working speed and time but also save 75% construction cost and enhance the crack resistance. The specification of rectangular reinforcement steel mesh as below: Rectangular Reinforcing Mesh 2.4m*6m=14.4sqm Code Cross wire Longwire mm Mass/sheetkg Quantityin pack Pitch@mm No. x dia., mm Pitch@mm No. x dia., mm RL718 7.60 @ 200 30 x7.6 6.75 @ 100 25 x 7.6 68 20 RL818 7.60 @ 200 30 x7.6 7.60 @ 100 25 x7.6 79 20 RL918 7.60 @ 200 30 x7.6 8.55 @ 100 25 x 8.55 93 20 RL1018 7.60 @ 200 30 x7.6 9.50 @ 100 25 x9.5 109 15 RL1118 7.60 @ 200 30 x7.6 10.65 @ 100 25 x10.65 131 15 RL1218 7.60 @ 200 30 x7.6 11.90 @ 100 25 x11.9 157 10 The panel size 2.4m*6m is very pouplar in Australian market,but considered the transportation in container by sea and saved cost, we advise the customers to change the panel size to be 2.2m x5.8m.

We manufacture mesh for tilt slabs , concrete tanks , commercial flooring components , and security purposes. We can customise sheet sizes and lapping requirements according to particular client needs. Talk to us about your reinforcing mesh requirements or check out the reinforcing mesh size options below.

A142 mild steel mesh is used widely across a range of industries and sectors. Reinforcing mesh is most often used in the construction industry for reinforcing concrete slabs in floors and other structures. A142 steel mesh is usually lowered into concrete as it sets, the concrete will then grip the a142 mesh making it more tensile and robust. Steels have a very similar coefficient to that of concrete, this helps to reduce internal strains caused by a change temperature, helping to make a strong robust material. A142 specifications: Wire thickness 6mm Mesh aperture size (square size) 200mm x 200mm Sheet size 2400mm x 1200mm A393 reinforcing mesh Main wires: 10mm Cross wires: 10mm Mesh size: 200mm x 200mm Weight: 6.16 kg/m2

1.Specification: Material:Low carbon steel, Ribbed steel, Deformed steel bar Type:Welded Mesh Standard:AISI, ASTM, BS DIN, GB, JIS Usage:Construction Reinforcement Hole Shape:Square Weave Style:Reinforcing mesh, Welded 2.Standard Size: 1. Rectangular Rib Mesh Standard Sheets - 6m (Length) x 2.4 m (width) RL1218 RL1118 RL1018RL918RL818RL718 2. Square Rib Mesh Standard Sheet - 6 m (Length) x 2.4 m (Width) SL81SL102SL92SL82SL72SL62SL52 3.Application: 1.Welded reinforcement steel wire mesh is widely used in construction filed,like housing floor, roof wall, terrace, concrete pavement; 2.Welded reinforcement steel wire mesh is also used in deck paving, airport runway, tunnel lining, concrete pipes, piles of industry and civilian; 3.Welded Wire Mesh can be used in wall,road for reinforcement. Skype:cara-gao Email:sales5_sjt@shengjintai.com.cn

HDPE Steel Mesh Reinforced Pipe This products series is a new style of low, medium ,and high pressure resistant composite pipes, taking high strength adhesive coated steel wires as the reinforcement between inner and outside composite thermoplastics. We implementing hygienic standards GB/T17219 of â??Safety evaluation index of drinking water distribution and distribution equipment and protective materialsâ??, the products standards conforms with CJ/T189-2007. Looking for HDPE mining tailing pipe, HDPE Pipe for Drawing Out Methane, Mining Pipe and HDPE steel mesh reinforced pipe? We views innovation as the driving force of sustainable development and creates value for society, customers, shareholders, employees.

Scope of application: Line wire diameter: 3.0-6.0mm Cross wire diameter: 3.0-6.0mm Line wire spacing: 50/70/100/150/200/250/300/350/400mm Cross wire spacing: 15/50/60/75/100/120/150/200/300mm Other and larger cross wire spacing freely programmable Max. Wire mesh length: 6000mm Max. Wire mesh width: 4000mm Finish could be: PVC coated, powder coated, Electro galvanized, Hot dipped galvanized. In bulk or with pallets.

Australian coal, australian diesel, brazilian sugar, construction steel, lng (liquified natural gas).

Aneealed wire, steel wire, low-carbon steel wire of general purpose, gost 3282-74 (din 177); low-carbon steel wire of general purpose, heat-treated, gost 3282-74 (din 177); low-carbon cold-drawn wire for reinforcement of ferroconcrete structures, gost 6727-80; welding wire of low-carbon steel, sv08a, gost 2246-70 (din 17145); splint pin, reinforcement mesh, hardware.

Concrete reinforcement welded steel wire mesh.

cold rolled, hot rolled reinforcing mesh and heat shrinkable insulation casing steel bars and other related products.Produce

Cld rolled ribbed reinforcement meshalso named: reinforcing welded mesh, welded reinforced mesh, reinforcing mesh, reinforcing weld mesh panels, reinforcing mesh, construction reinforcing mesh. Cold rolled ribbed reinforcement mesh assortment:cold-rolled ribbed reinforcing mesh, hot-rolled ribbed reinforcing mesh, the most widely application of cold-rolled ribbed steel mesh; Cold rolled ribbed reinforcement mesh is hot rolled wire rods by the multi-channel cold reducing pressure rib and the elimination of internal stress formed with two or three surfaces on the crescent shaped reinforced. The mesh is welded by the cold ribbed steel net. He in the prestressed concrete is the update to the cold drawn low carbon wire replacement products, substitution reinforced grade i, is a better similar processing of cold drawn steel. Cold rolled ribbed reinforcement mesh material: crb550 cold-rolled ribbed steel bar, crb550 cold drawn round steel bar, hrb400 hot rolled ribbed bar

Cld rolled ribbed reinforcement meshalso named: reinforcing welded mesh, welded reinforced mesh, reinforcing mesh, reinforcing weld mesh panels, reinforcing mesh, construction reinforcing mesh. Cold rolled ribbed reinforcement mesh assortment:cold-rolled ribbed reinforcing mesh, hot-rolled ribbed reinforcing mesh, the most widely application of cold-rolled ribbed steel mesh; Cold rolled ribbed reinforcement mesh is hot rolled wire rods by the multi-channel cold reducing pressure rib and the elimination of internal stress formed with two or three surfaces on the crescent shaped reinforced. The mesh is welded by the cold ribbed steel net. He in the prestressed concrete is the update to the cold drawn low carbon wire replacement products, substitution reinforced grade i, is a better similar processing of cold drawn steel. Cold rolled ribbed reinforcement mesh material: crb550 cold-rolled ribbed steel bar, crb550 cold drawn round steel bar, hrb400 hot rolled ribbed bar Cold rolled ribbed reinforcement mesh size:d5,d6,d7,d8,d9,d10,d11,d12,e5,e6,e7,e8,e9,e10,e11,e12