Find Verified St 150 Rotary Borehole Drilling Rig Suppliers, Manufacturers and Wholesalers

1. ST-150 Rotary Borehole Water Well Drilling Rig Equipment with hydraulic feeding device, elevated drilling efficiency, reduced labor strength. 2.The ST-150 Rotary Borehole Water Well Drilling Rig Equipment is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown, high efficiency, safe and reliable. 3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole. 4. ST-150 Rotary Borehole Water Well Drilling Rig Equipment designed into compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.

Product Feature: 1. The rig is equipped with latest MW525 car transmission assembly, it owns 10 forward gears and 2 reverse gears, the gear speed design is reasonable to meet the needs of different drilling technology . 2. The drilling rig with large output torque and bearing capacity easy to handle a variety of underground accidents. Mechanical transmission structure is compact, spindle diameter is 96mm, bearing distance is big, drilling rig rigidity is good. 3. Hydraulic system controls the feeding pressure and speed to meet the needs of all kinds of formation drilling. The machine is equipped with pressure indicator at the bottom of the hole, it is easy to grasp the situation inside the hole. 4. This drilling machine is small size, light weight, good disassembly, good layout, flexible and reliable operation, easy maintenance.

ST-200 portable water well drilling rig equipped with BW-160 mud pump and 22HP diesel engine, Max. drilling depth can be 230m with the opening diameter of 75-400mm, trailer, crawler, and tractor chassis for choice. a. the machine is equipped with crawler chassis device, easy to move with fast speed. b. hydraulic oil pressure feed device, improve drilling efficiency. c. pressure gauge display the condition of the bottom of the drill hole. d. drill mast controlled by hydraulic cylinder, improve the efficiency diesel engine adopt the electric starter, to reduce the labor intensity.

Drilling Rig Description: 1.Construction drilling of the projects e.g. prospection, geotechnical investigation, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction; 2. Core drilling, mining exploration, Or exploration; 3. Small hole diameter water well drilling; 4. Geothermal pipe-installing for heat pump; 5. Small-diameter hole foundation piling drilling. Feature: ST-200 type drilling rig is a hydraulic feeding of low speed and high torque portable drilling rig. The railway, hydro power, traffic bridges foundation and other buildings in the engineering geological investigation. The geological core drilling, geophysical survey The small grout Confucians, blast hole drill The small water well drilling. The characteristics of drilling rig: 1. With the hydraulic feeding mechanism, improve the drilling efficiency, reducing the labor intensity of workers. 2. The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency convenient operation, safe and reliable. 3. Furnished with hole bottom pressure gauge pressure indicator, and easy to master the status inside the hole. 4. The handle centered, convenient operation. 5. The drilling machine has the advantages of compact structure, small volume, light weight, convenient move.

JK610 Crawler Mounted Blasting Borehole Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig borehole drilling machine In contrast with pneumatic drill rig, the air displacement of matched air compressor reduces 30% to 50%. JK610 internal combustion (electric) crawler mounted hydraulic DTH drill rig, is the latest updated product of "Sharp Sword" series, featuring its better performance, lower operation cost and humanized design.  It adopts a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning.  During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drilling rigs, JK610 consumes about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%.  JK610 is equipped with dust collecting system, and wet type dust collector is optional as long as water is accessible on site.  JK610 is mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK610 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4148mm Rod-changing length 3m Max. horizontal drilling height 3370mm Rotation rate 0-60rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 30° Power Yuchai 70KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mmÃ?2000mmÃ?2500mm Weight 6900kg Wired remote control Optional

Product Feature: 1. With the hydraulic feeding mechanism, improve the drilling efficiency, reducing the labor intensity of workers. 2. The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency convenient operation, safe and reliable. 3. Furnished with hole bottom pressure gauge pressure indicator, and easy to master the status inside the hole. 4. The handle centered, convenient operation. 5. The drilling machine has the advantages of compact structure, small volume, light weight, convenient move.

Fes supplies ytr series rotary driling rigs which incorporate high quality global parts and components, including: caterpillar base carrier, brevini gear box and rexroth motors, etc. The rigs range from 80knm to 400knm in torque. Since

Series ytr rotary drilling rig is one kind of high efficiency pile hole construction drilling rig that suitable for the construction of base piles such as bridges, railroads, and building construction, of which the products features high hole drilling efficiency, power-saving, environmental protection, low machine malfunction rate, and high reliability.

Model 180 Weight(Kg) 4500 Dimensions(mm) 2700Ã?1550Ã?2350 Traveling speed(Km/h) 0~2.5 Engine model YC4D08 Power 58Kw/2400rpm Climb capacity(°) 20 Drilling depth(m) 180 Working pressure(MPa) 1.05-2.46 Air consumption(m3/min) 16-30 Length of rod(mm) 2000 Drill bit diameter(mm) Ï?110-202 Feed cylinder stroke(mm) 400 Feed power(N) 25000 Lift power(N) 50000 Speed of rotator(rpm) Min.speed 33 Max.speed 67 Lifting speed(m/min) Min.speed 8 Max.speed 26 Forcing speed(m/min) Min.speed 0-15 Max.speed 51 Rotation torque(N·m) 4200

Overview: Rotary Drilling Rig is a self-running ground drilling equipment, including drilling rig and crawler car, which completes the drilling through the rotation, excavation, lifting, soil unloading of drill. It plays a vital role in varied foundation works of industrial infrastructure, such as concrete pouring pile, continuous wall. Application: Widely used for drilling and grouting in urban high-rise buildings, railways, highways, bridges, tunnels, airports, ports and other pile foundation engineering. Features: Diesel powered with higher work efficiency; Highly integrated body without installation; Can freely rotate to 360and move easily; No dust and mud pollution while high-speed drilling.

1.keeping bracket is installed on the hoist to form a double wheel support structure, can withstanda strong blow. 2.Vertical box four couple of bearings positioned to ensure the rotary machine has a sufficient rigid response to gravel layer, the complex geological conditions. 3.This machine adopts national patent technology taper clutch,with charactristics of strong transmission torque, easy to operation, free to maintenance. 4.53x59 driving lever is adopted, high rigitidy, strong delivery torque.

ST-100 Drilling Rig widely applied in bore well drilling, underground core drilling, large-scale water conservancy projects, etc. It can work in soft soil, sediments, gravel and hard rocks. It has been exported our drilling rig to more than 20 countries, mainly Kenya, Ghana, Togo, Chili, Tanzania, Mexico, France, Canada, Lesotho, etc. Features of ST-100 Water Well drilling machine, borehole drilling machine, soil drilling rig machine: 1. Power can be electric motor or diesel engine as options. 2. Two or four wheels can be mounted on tractors, trailers or cars. Easy for outdoor and rugged place drilling. 3. Integrated mud pump, gearbox, hoist, etc. Not only saving land, but also easy to take and operate. 4. Different operation handles to control working. One person is able to operate it. 5. Easy to assemble and dissemble. One person is able to handle.

Drilling depth 200m Maximum open hole caliber 400mm End hole caliber 75mm Diameter of drill rod 50mm Drilling angle 90~75 Weight(not include power) 760kg Dimension 2750*950*1600mm 2. Vertical shaft Rotating speed 71,142, ,310,,620r/min Feeding stroke 450mm 3.Hoist Max. single line hoisting capacity 2400Kg Diameter of wire rope 13mm Volume of winding drum 35m Hug floodgate caliber 230mm Hug floodgate belt width 70mm 4.Mud pump Type Horizontal single urn twin-action Rate of flow 180L/min MAX. pressure 1.5MPa Working pressure 0.7MPa Diameter of water inlet tube 50mm Diameter of water outlet tube 45mm 5.Power Diesel engine 22HP, 2200r/min

Drilling Rig Drilling diameter(mm) 75,91,110,130,150,300 Drilling depth (m) 200,150,100,70,50,30 Drill pipe diameter (mm) 42,50 Drilling angle(°) 90~75 Equipment size(L * B * H) 1730 * 860 * 1360 (mm) Rig weight (except engine) 700 Mobile device Moving length 350mm Leave distance 300mm Gyrator Spindle speed (four gear) (r/min) 115,230,505,1010 Spindle travel(mm) 450 Spindle no-load lifting maximum moving speed(m/s) 0.05 Spindle no load drop maximum movement speed(m/s) 0.067 Spindle maximum feed pressure(KN) 15 Spindle maximum lifting force(KN) 25 Spindle maximum output torque(KN� m) 1.5 Winch assembly Winch maximum lifting force (single rope) 20 Reel speed (r/min) 20,39,85,170 Reel circumferential speed(m/s) 0.172,0.345,0.738,1.476 Reel diameter(mm) 140 Wire rope diameter(mm) 9.3 Wire rope density (m) 40 Brake diameter(mm) 278 Brake band width (mm) 50 Oil pump Oil pump type YBC -20/125 Nominal pressure (Mpa) 12.5 Rated flow(ml/r) 20 Rated speed(r/min) 800-2500 Diesel engine or motor Diesel engine 1115 Rated power (KW) 16.2 Rated speed (r/min) 2200 Rated pressure(Mpa) 12.5 Motor type Y160M - 4 Rated power (KW) 11 Rated speed (r/min) 1460

1.The features of KY-150 hydraulic drilling rig KY-150 full hydraulic drilling rig is easy to disassemble and convenient to transport. The drilling rig has flexible arrangement, and the drilling pipe can be dismantled mechanically, which can reduce labor cost and improve work efficiency. Also the rig has infiniTely variable speeds. KY-150 full hydraulic drilling rig has the function of linkage. It is simple and safe to control the rig through the operation platform. The spindle of the gyration adopts the through hole structure. The length of the drill pipe is not restricted by the drilling rig, and it can also be applied to diamond wire-line coring drilling. KY-150 full hydraulic drilling rig uses full hydraulic operation to make the structure more reasonable to make the function more complete. It uses variable motor which has wide speed regulating range. This drilling rig applies to high speed drilling of alloy steel stone and hard alloy drilling at low speed, and it is suitable for any inclination drilling in the tunnel or surface drilling.

MODEL C650D-EXP BLASTHOLE DRILL SPECIFICATIONS RATED CAPACITY : Nominal hole size 7-7/8¡¨(200 mm ) by Rotary method, Upto a depth of 148¡¦ (45.12 m) using 30¡¦ long 6.25¡¨ OD drill pipes. STANDARD MOUNTING : Tengl, India make Under Carriage model T23/D4 , 24¡¨ Triple grouser track 10¡¦ 6¡¨ long with 9 bottom rollers and 2 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 3.0 KMPH on plains and 1.5 KMPH on grades. Gradeability up to 25% grades with Mast down. PULLDOWN AND HOIST : Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 33¡¦ head travel for handling 30¡¦ long drill pipe. Pulldown capacity : 35,000 LBS. Hoisting capacity : 20,000 LBS. Standard feed rate : 14 FPM Standard hoist rate : 25 FPM Fast feed rate : 70 FPM Fast hoist rate : 124 FPM MAST :Electrically welded square and rectangular steel mast of robust construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 38¡¦ for 30¡¦ long drill pipe. ROTARY HEAD :Axial piston hydraulic motor driven top head drive through spur gear reduction with a constant torque of 48,000 Inch-pounds at 0-150 RPM infinitely variable speed. AIR COMPRESSOR :Screw compressor with a capacity of 900 CFM at 100 PSI. Air oil receiver, Oil cooler, Oil filters and safety valves are provided as standard. PRIME MOVER : Cummins India make engine NTA 855C running @ 1800 RPM drives compressor @ flywheel end and hyd. pumps @ front PTO. Fuel tank capacity : 750 lit. DRILL PIPE HANDLING : Hydraulically operated Four pod loader suitable for handling 6.25¡¨ OD x 30¡¦ long drill Hydraulic power breakout wrench and stem wrench are provided as standard. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, Fan, auxiliary and pilot circuits. Axial piston ,variable volume pump: 48 US GPM at 4700 PSI for tram circuit and at 4200 PSI for rotation circuit. Axial piston pump : 12 US GPM at 2500 PSI for feed circuit. Gear pump for ROC fan : 22 US GPM at 3000 PSI for ROC fan circuit and 15 US GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters. Relief valves in all circuits. LEVELLING JACKS : Three hydraulic jacks - one front 140 MM bore, 48¡¨ stroke; two rear 125 MM bore, 36¡¨ stroke equipped with heavyduty telescopic guide tubes and lock check valves for safety. OPERATOR¡¦S CAB :Fully enclosed spacious steel fabricated, sound suppressed, thermal insulated, Air-conditioned and safety glassed cab with centralised controls for operator¡¦s convenience. Adjustable seat for operator¡¦s comfort and a seat for Helper. DUST CONTROL SYSTEM : NVE type dust control system, equipped with hydraulic motor driven blower and dry type filters. NIGHT LIGHTING : Adequate lighting to enable operation of drill at night times. Lights powered by engine alternator at 24V, DC supply. WEIGHT AND DIMENSIONS :(Approx.) Length(mast down) : 43¡¦ 0¡¨ Length(mast up) : 32¡¦ 0¡¨ Width : 14¡¦ 2¡¨ Height(mast down) : 16¡¦ 0¡¨ Height(mast up) : 42¡¦ 6¡¨ Operating Weight : 73,500 LBS OPTIONAL EQUIPMENT: Centralised Lubrication system Shock sub for rotary head Rotary Deck Bushing Hyd powered winch Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system Retractable dust curtain Water injection system with water tank Angle hole drilling kit upto 25„a in steps of 5„a. 122

Description: The PCDR-150 drill rig is ideal for Soil testing drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PCDR-150 rigs flexibility means it will be mounted on tractor and (Rig can be mounted on two wheel or four wheel tractor upon customer request) Optional: Multipurpose drill rig (Core, DTH, Mud rotary) Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement Drill rod handling : 10 feet (3.0 meter) Drilling depth: up to 500 feet (150 meters) Drilling diameter: NQ-HQ Pull up force:5000 kgf Drill head torque : 40 kg.m 70 kg.m Carrier : Tractor(Optional: Truck) Optional : Crawler/Skid/Trolley