I. Introduction SS-2000-HG mercury emission monitoring system for flue gas is a combination of the world's advanced online analytical technology and China's environmental protection monitoring technology. It is based on the company's many years of accumulated experience in the field of gas analysis and adopts multi optical path UV atomic absorption method. The system consists of a sampling unit with heat trace, a valence converter, and an analysis and processing unit. It can realize continuous on-line automatic and accurate measurement of mercury from fixed sources of flue gas. The system uses Cold Vapor Atomic Absorption Spectrometry (CVAAS), which is the most mature and stable analytical method among many mercury analysis methods. This method can only analyze the elemental mercury (Hg0) in the vapor state. CVAAS is based on the principle of selective absorption of ultraviolet light with a wavelength of 253.7 nm using mercury vapor. The low-pressure mercury lamp emits ultraviolet light through a gas chamber filled with sample gas and directly monitors the transmitted light intensity with an optoelectronic receiver to calculate the absorbance. Within a certain concentration range, the mercury concentration is proportional to the absorbance, which is in accordance with Beer-Lambert law. At the same time, oxygen, temperature, pressure, flow rate, humidity and other parameters can be monitored. Charts are generated through the data acquisition and processing system, and data remote transmission interfaces are reserved. The monitoring data can be transmitted to all levels of environmental protection according to the HJ/T212 national standard communication protocol. department. II. Specifications 1. Detection method: Cold Vapor Atomic Absorption (CVAAS) 2. Measurement range: 0-100g/m3, 0-500g/m3 3, detection limit: 0.05g/m3 4, response time T90:
Virgin Mercury purity = 99.99% Pure by wt min. - Free from heavy metals - Packing iron cylinder ( 34.5)kg net weight - Physical State: Liquid - Appearance: silver - Odor: odorless - PH: Not available. - Vapor Pressure: 0.002 mm Hg AT 25C - Vapor Density: 7.0 - Evaporation Rate: Not available. - Viscosity: 15.5 mP AT 25 dig C - Boiling Point: 356.72 dig C - Freezing/Melting Point:-38.87 dig C - Decomposition Temperature: Not available. - Solubility: Insoluble. - Specific Gravity/Density: 13.59 (water=1) - Molecular Formula :Hg - Molecular Weight: 200.59 Mercury Packaging: * 34.5kg virgin steel flask
Mowell Touch Screen Patient Monitor System with 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse Specifications: 12? LED Touch Screen 16:9, suitable for bedside, operation room, ICU, etc. Various display screen : Trend Coexist Display, OxyCRG Dynamic View Display, Bed to Bed view Display Arrhythmia Analysis, Multi-Lead ECG Waveforms Display in Phase, Real time S-T segment analysis, pacemaker detection Drug calculation and titration table. 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse Can be used to monitor adult, pediatric & neonate patient and Low perfusion working possible. Advanced streamline outline design, compact, lightweight, in-built handle makes it truly portable.
Mowell Touch Screen Patient Monitor System with 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse Specifications: 12 LED Touch Screen 16:9, suitable for bedside, operation room, ICU, etc. Various display screen : Trend Coexist Display, OxyCRG Dynamic View Display, Bed to Bed view Display Arrhythmia Analysis, Multi-Lead ECG Waveforms Display in Phase, Real time S-T segment analysis, pacemaker detection Drug calculation and titration table. 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse Can be used to monitor adult, pediatric & neonate patient and Low perfusion working possible. Advanced streamline outline design, compact, lightweight, in-built handle makes it truly portable. Mowell Touch Screen Patient Monitor System with 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse
2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials
Virgin Mercury purity = 99.99% Pure by wt min. - Free from heavy metals - Packing iron cylinder ( 34.5)kg net weight - Physical State: Liquid - Appearance: silver - Odor: odorless - PH: Not available. - Vapor Pressure: 0.002 mm Hg AT 25C - Vapor Density: 7.0 - Evaporation Rate: Not available. - Viscosity: 15.5 mP AT 25 dig C - Boiling Point: 356.72 dig C - Freezing/Melting Point:-38.87 dig C - Decomposition Temperature: Not available. - Solubility: Insoluble. - Specific Gravity/Density: 13.59 (water=1) - Molecular Formula :Hg - Molecular Weight: 200.59 Mercury Packaging: * 34.5kg virgin steel flask
Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations
With over 2000 farmers covering 5 regions in Karnataka, we cultivate and process gherkins, chillies, capsicums, carrots, cauliflower and celery from our FSC 22000 processing plant in India. Setup by hands-on industry experts with an average of almost 20 years experience each,we have systems and practices in place to ensure our contract farmers achieve the highest yields and our products meet the highest standards expected by our clients. With the future in mind, all farmers are taught to follow sustainable agricultural practices. We have implemented practical and scientific post-harvest techniques to ensure that freshness is retained till we pack into barrels. Our team of qualified field staff, personally monitor all farmers, visiting each twice a week, providing invaluable ongoing support and guidance, which greatly contributes to greater yields and the overall quality of our produce.
With over 2000 farmers covering 5 regions in Karnataka, we cultivate and process gherkins, chillies, capsicums, carrots, cauliflower and celery from our FSC 22000 processing plant in India. Setup by hands-on industry experts with an average of almost 20 years experience each,we have systems and practices in place to ensure our contract farmers achieve the highest yields and our products meet the highest standards expected by our clients. With the future in mind, all farmers are taught to follow sustainable agricultural practices. We have implemented practical and scientific post-harvest techniques to ensure that freshness is retained till we pack into barrels. Our team of qualified field staff, personally monitor all farmers, visiting each twice a week, providing invaluable ongoing support and guidance, which greatly contributes to greater yields and the overall quality of our produce.
With over 2000 farmers covering 5 regions in Karnataka, we cultivate and process gherkins, chillies, capsicums, carrots, cauliflower and celery from our FSC 22000 processing plant in India. Setup by hands-on industry experts with an average of almost 20 years experience each,we have systems and practices in place to ensure our contract farmers achieve the highest yields and our products meet the highest standards expected by our clients. With the future in mind, all farmers are taught to follow sustainable agricultural practices. We have implemented practical and scientific post-harvest techniques to ensure that freshness is retained till we pack into barrels. Our team of qualified field staff, personally monitor all farmers, visiting each twice a week, providing invaluable ongoing support and guidance, which greatly contributes to greater yields and the overall quality of our produce.
With over 2000 farmers covering 5 regions in Karnataka, we cultivate and process gherkins, chillies, capsicums, carrots, cauliflower and celery from our FSC 22000 processing plant in India. Setup by hands-on industry experts with an average of almost 20 years experience each,we have systems and practices in place to ensure our contract farmers achieve the highest yields and our products meet the highest standards expected by our clients. With the future in mind, all farmers are taught to follow sustainable agricultural practices. We have implemented practical and scientific post-harvest techniques to ensure that freshness is retained till we pack into barrels. Our team of qualified field staff, personally monitor all farmers, visiting each twice a week, providing invaluable ongoing support and guidance, which greatly contributes to greater yields and the overall quality of our produce.