The heat collectors and the water tanks are connected perfectly, the heat which the panels collected will be stored in the water tank, it guarantees 24 hours per day to provide the hot water, and the system can work even under the -30 degrees. It can supply with a few tons even more water, is an ideal hot water supply system. It is applied to the big hotels, restaurants and other large places. 1: The water tank should be placed higher than the heat collectors, while the models are isolated types and the heat collectors are not pressure-enduring; The water recycled freely by the height difference between the water tank and the heat collectors. 2: The water tank should be placed lower than the heat collectors, while the models are isolated types and the heat collectors are pressure-enduring, the water is recycled by the water pump between the water tank and the heat collectors, the specific pressure-enduring models, please see the information of the pressure-enduring models on the web.
Structure of solar collector: 1. Manifold 2.F58mm heat pipe tube 3.Side track 4.Bottom track 5.Feet holder Characteristics 1.Water is rapidly heated by the heat pipe. 2.There is no water in the vacuum tube, so the tube will not break in cold climate. 3.The small size of the collector allows for versatile architectonic integration. 4.Collectors can be combined with existing pipeline. 5.The collector can operate even in case of a broken tube. A single tube can, if necessary, be exchanged without interruption of the heating cycle. Type: jt58/1800-20 ac/sc Aperture area (m2) : 1.872 Vacuum tube qty (pcs) : 20 Vacuum tube size: f58*1800 mm Dimension: 2000*1600*130 Gross weight (kg) : 77 20gp/40gp/40hc loading qty(sets) : 82/164/200 Remark: Inlet and outlet: 22mm Testing pressure: 1 mpa Working pressure: 0.6 mpa Stagnation temperature: 200 ? Distance between tubes: 75 mm Installation angle: 15-75 degree Warranty: 5 years Paymant: t/t, paypal, l/c at sight Packing: standard box/ carton box Transportation: after payment 15-20 days at sea / airplane
Skylight Evacuated Tube Specifications: 1. Length (nominal):1800mm/1600mm 2. Outer tube diameter: 58mm/47mm 3. Inner tube diameter: 47mm/37mm 4. Glass thickness:1.8mm/2.0mm 5. Thermal expansion: 3.3x10-6í¦C 6. Material: Borosilicate Glass 3.3 7. Absorptive Coating: Graded Al-N/Al 8. Absorptance: v>93% (AM1.5) 9. Emittance:
Solar keymark Solar collector Reliable, efficient, twin-glass solar tubes heat pipe Copper heat pipes for rapid heat transfer Corrosion resistant brazed copper header Fetures: 1) length: 1800mm; thickness: 0.8mm 2) the manifold: Made of red copper Conducted by heat transfer medium liquid 3) the out casing: Made of aluminum alloy mold material of high-strength with air flow design 4) water can't flow into vacuum tubes 5) resistant to high-pressure( 6bars) 6) resistant to extremely cold or hot environment 7) no harm or pollution, environment protective, clean, healthy Economic, invest once and benefit for ever 8) to assemble many collectors together for the solar central heating project of the hotel and factory are permitted. Modelabsorb a rea (m2)heat pipesupply hot water (l/)qty. Per 20/40 container (set) Diameter(mm) length (mm) no. (pcs) Free/j-1800/58-181.4458180018150/6084/175 Free/j-1800/58-201.6058180020175/6077/160 Free/j-1800/58-241.9258180024220/6064/133 Free/j-1800/58-302.4058180030260/6052/106 Whole packaging
Specification: Manifold box: inner tank: stainless steel 304-2b, 0.4mm. Outer tank: stainless steel or galvanized steel. Frame: profile stainless steel, 1.2mm or more, or galvanized steel, 1.2mm or more. Types of tubes: 47-1500, 58-1800, or other types. No. Of tubes: from 10 tubes to 50 tubes. Characteristic: High efficiency, low cost Suitable for project or home use No pressure at all, very safe easy installation Beautiful outlook, match the building perfectly large absorbing area
Features: * Choose applicable non-pressure manifolds according to different demands. * From family to factory; from tens to hundreds to thousands, it is widely used in hotels, schools, armies and factories. * Automatic supplying water, electric heat, recycling and protection. * Investment only once, benefit forever. * No harm, no pollution, save an clean Key specifications: * Material: stainless steel or Anodized aluminum * High-performance evacuated tube design. Up to 75% efficient a) Size: 47 x 1,500mm / 58 x 1,800mm b) Qty: 15 / 20 / 25 / 30pcs c) Hail resistance: diameter 25mm * Temperature conservation layer in chest a) 30mm thickness imported polyurethane, machinery overall for keeping the same temperature and high pressure foam b) Heat preservation: 72 hours * ISO9001:2000 / CE/CCC certificate * 3 years international responsibility for free repairing or exchange due to original quality problems * Packing: export carton and foam
Working principle: * combined many collectors with water storage tank as complete projects, heat pipe in solar vacuum tube for heat transferring, by circulation pump and relative system to make transfer medium liquid take the heat to water tank. Key specifications: * solar vacuum tube with heat pipe A) size: 47 x 1, 500mm / 58 x 1, 800mm B) qty: 15 / 20 / 25 /30 C) hail resistance: diameter 25mm * material: stainless steel or anodized aluminum * temperature insulation layer in chest A) 30mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam B) heat preservation: 72 hours * max pressure bearing: 0.8mpa * 3 years international responsibility for free repairing or exchange due to original quality problems * packing: export carton and foam
1. Blocking design, easy assembled 2. It can be mounted sloping roof and wall without frame 3. The pipeline is made of red copper and conducted by heat transfer medium liquid; water can't flow in the vacuum tubes and is operated when confined 7 layers thicken cartons
Solar collector The characteristic: 1 the vacuum tubes absorb the solar energy and transfer into the heat energy, then pass it to the u pipe, it can get high temperature. 2 there is no water in the vacuum tube, so the tube will not break in the winter. 3 it is steady and credible. 4 it can be combined with the architecture perfectly. 5 it can be combined with existing pipeline. 6 it can still operate in the event of occasional tube breakages. The details of material: Outer tank: alnico 1.5mm Manifold: 22mm thickness 2mm U copper type: 8mm thickness 0.6mm G.W. 50.6kg
Solar collector The characteristic: 1 The water is heated by the heat pipe rapidly. 2 There is no water in the vacuum tube,so the tube will not break in the winter. 3 It can be combined with the architecture perfectly. 4 It can be combined with existing pipeline. 5 It will be affected by the local water quality,it doesnf+t suit hard water. 6 It can still operate in the event of occasional tube breakages. The details of material Outer tank: Alnicof¼1.5mm Manifold:fT22mm thickness 2mm g.w. 77.1kg
Solar collector receive solar radiation and convert into heat energy, can use to heat water.
Solar Collectors ODELKE 2.0RKE 2.5R Gross area (m²)2,092,49 Absorber area (m²)1,922,31 Effective area,(m²)1,922,31 Length (mm)20302030 Width,(mm)10301230 Height,(mm)9292 Weight (kg)4250 InstallationVerticalVertical Absorber typeHarpHarp Absorber volume (l)1,371,64 Absorber typeHigh SelectiveHigh Selective Thickness (mm)0,500,50 Absorptivity95% +/-2%95% +/-2% Emmisivity5% +/-2%5% +/-2% Welding processLaserLaser Stagnation temperature193193 Certification BENSEN12975 BENSEN12975 Maximum Operation Pressure10 bar10 bar
Our main product is solar water heater, solar project, has laser welding, automatic punching and vacuum sputtering equipment to strictly control the product quality. Main high and core technology is blue coating flat collector, which is advanced worlwide. Our main product is solar water heater, solar project, has laser welding, automatic punching and vacuum sputtering equipment to strictly control the product quality. Main high and core technology is blue coating flat collector, which is advanced worlwide.
Detailed Specifications: 1. Quantity of tube: 15pcs 2. Absorber Area: 1.95 m2 3. Daily output: 110-150L 4. Manifold: Aluminum Alloy with plastic coated with 1.5mm 5. Pipeline: Material: Red copper; Diameter: 35mm; Thickness: 1.0mm 6. Copper pipe: TP2 copper; Diameter: 8mm; Thickness: 0.6mm 7. Heat preservation Layer: Polyurethane integral foaming with 40mm 8. Support frame: Aluminum Alloy \ hot zincification steel with 1.5mm 9. Work pressure: 0.6Mpa 10. Certification: CE, ISO9001: 2000, CCC export carton
Heat pipe solar collector 1) reliable and efficient twin-glass solar tubes; 2) copper heat pipes for rapid heat transfer; 3) easy plug-in installation; 4) free maintenance; 5) suitable for mains pressure water (up to 8 bar/116psi); 6) corrosion resistant silver brazed copper header; 7) aluminum frame; 8) powder coated (black, brown or silver) aluminum casing; 9) stable solar conversion during the day; 10) the perfect solar collector for domestic solar water heater systems; 11) ideal for commercial solar water heating applications.
Consol solar collector
Flat plate solar collector Features: High performance with nice feature 93% absorptance; 25% emittance Absorbing fins: copper / or aluminum with selected coating All copper pipe inside Dark color or silver color of aluminum alloy frame Cover glass: tempered glass with 4. 0mm thickness Back cover sheet: galvanized steel sheet or aluminum sheet Insulation: glass wool
Heat pipe solar collector Tech data: 1. Manifold casing materials:galvanized steel, aluminum alloy or stainless steel;sliver or black;insulation: rock wool or puf. 2. Header pipe materials:copper tu2, 1.0mm thickness and 35mm diameter. 3. Vacuum tube heat pipe:copper, tu2; 8mm dia; 1700mm len.;condenser, dia, 14mm; single or double fins. 4. Frame material: galvanized steel, aluminum alloy or stainless steel. 5. Fame angle can modified according to the customers, requirement. 6. Manifold shape and size can be modified according to the customers, requirement. Characteristic: The heat pipe solar collector is connected with storage tank, electric control device, hot water mix unit and fittings for circulation and installation. The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins. The liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat ex-changer and the vapor becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.
Evacuated tube collector with CPC-reflector - 6 evacuated tubes for water, space and process heating, series connection Pipe material: Copper Scope of delivery: Fully pre-assembled unit comprising Evacuated tubes based on the thermos flask principle Manifold with direct flow heat conduction unit and dry tube connection CPC-reflector Collectors are packed in individual boxes. In addition, there is a sun protection sheet over the evacuated tubes. Installation types: On-roof installation Flat roof / wall installation
1. Inner tank: Import stainless steel SUS304-2B food grade; thickness:1.2mm 2. Outer tank: galvanized steel/Stainless steel SUS201, thickness: 0.4mm. 3. Vacuum tube: heat pipe 58x1800mm 4. The material of insulation:High-density polyurethane integrated foam-forming layer 50mm thickness 5. Frame(Bracket): galvanized steel/Stainless steel 6. Angle: As customer requirement 7. Heat preservation: 72hrs
