Global Tech GFP EoP, Ethernet over PDH, Interface Converter can transport GFP encapsulated Ethernet service over 1 up to 16 E1 channels. Fully comply with G.7041, G.7042, G.7043, and G.8040 recommendations, GFP Interface Converter can cooperate with the products from other manufactures adopted the same recommendations. GFP Interface Converters can transform traffic between E1 interface and Ethernet interface, and utilize current adequate E1 resources to extend the Ethernet transmission distance and coverage range without any network reformation. Feature * GFP encapsulation based Ethernet interface can cooperate with other vendors GFP based Ethernet equipments. * Up to 4 Ethernet interfaces. * Switching Ethernet interfaces isolation is configured by E1 channel or 802.1Q through NMS, disabled by default. * Automatically Fault Shifting function. * Support Telnet/Web browser/SNMP NMS management. Strong NMS function to support client managing in complicate topology. Technical Parameter * E1 Interface - Bit Rate: 1.984M bps - Coding: HDB3 - Impedance: 75, Unbalanced/ 120, Balanced - Port Feature: G.703 and G.704 - Connector: Q9 (75)/ RJ45 or RJ48-C (120) * Ethernet Interface - 10M/100M auto negotiation - Full/half duplex auto negotiation - Port Quantity: 1, up to 4 ports - MDI/MDIX auto negotiation - Related Standard: G.7041, G.7042, G.7043, G.8040 * Optical Interface - Wavelength: 850nm, 1310nm, 1550nm - Optical Port: Single Fiber/ Dual Fiber, FC/SC, Transmission Distance, SMF/ MMF optional. - Tx Power: > -8dBm, 40km - Rx Sensitivity: < -36dBm, 40km * Operation Environment - Working Temperature: -10~ 55 - Storage Temperature: -40~ 70 - Relative Humidity: 5%~ 95%, non-condensing - No corrosive and solvent gas, no dust and heavy EMI - Power Supply: AC 180~ 260V, Desktop, DC -72~ -36V, Chassis - Support 1+1 dual power supply in chassis configuration - Typical Consumption: 5W, Desktop 75W, Chassis - Physical Dimension: Desktop, 19¡± Rack-mountable: 218mm(W)*44mm(H)*136mm(D) Chassis: 483mm(W)*171mm(H)*177mm(D).
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)
Gve(e1, g.703 to v.35, v.24 converter) Gve(e1, g.703 to v.35, v.24 converter) Detailed selling lead description Features: 1) v-gve is an asic-based converter using one e1/g.703 to convert to v.35 2) can convert successive n x 64k (n=1-32) data stream into pcm signal of e1, the data rate is up to 2048kbps 3) placed in e1 frame, data user just needs necessary timeslot 4) setting timeslot is continuous and according to rate of data port 5) the data ports have v.35 and v.24/rs232c which are optional 6) the ports support external clock and become linking end line 7) v-gve satisfies the requirements of g.703, g.704&g.706 of itu 8) v-gve has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnose conveniently Detailed product description Features: 1) rate of data transition: n x 64kbps (n=1-31), 2, 048kbps 2) transmission mode: synchronization 3) line interface: impedance 75 ohm, physical interface bnc; impedance 120 ohm, physical interface rj45 4) transmission features: comply with g.703 5) clock: line; external 6) testing method: local analogy loopback, remote digital loopback 7) dce interface: v.35 or v.24/rs232c 8) power supply: 220v f+ 10%, 50hz; 48v dc (optional) 9) power consumption: 5w 10) volume (l x w x h): 225 x 145 x 40mm; 9" x 5.8" x 1.6" 11) temperature: 0 - 40fpc 12) humidity: 0~95%
Gve-tplus(e1/g.703 to v.35 ehernet converter GVE-Tplus(E1/G.703 to V.35 Ehernet converter Detaile Selling Lead Description Features: 1) GVE-T plus can convert E1 to both V.35 interface and LAN interface 2) Bandwidth of every port can be set into N x 64kbps (N=1-31) continuous data stream, although the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It supports choices of CRC4 on/off and CAS/CCS (30 & 31 time slot) 3) GVE-T plus also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N x 64kbps (N=1-31). The work mode can be either internal clock and slave-clock, or N x 64kbps (N=1-31) external clock to achieve end- linking line 4) GVE-T plus can be set up into long-range Ethernet Bridge from V.35 to LAN interface 5) GVE-T plus has two transmission modes to choose from: data and image 6) GVE-T plus has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test Detailed Product Description Ethernet features: 1) LAN table: 10,000 automatic learning and updating 2) Filtering and forwarding: 30,000 frames / second 3) Buffer size: 64M 4) Throughput delay: 1 frame 5) VLAN: comply with 802.1Q LAN feature: 1) Standard: conforms to IEE802.3 / Ethernet 2) Work mode: full duplex / half duplex 3) Data rate: 10Mbps 4) Physical interface: 10 BaseT (UTP), shielded RJ-45 5) WAN E1 / G.703 feature: 6) Line transmission rate: N 64Kbps (N=1-31) 2048Kbps 7) Line coding options: HDB3 8) Format of line frame: G.703 (framed / unframed) 9) Line interface: BNC; RJ45 Transmission features: 1) Comply with G.703 2) Rate of data transmission: N 64Kbps (N=1-31) 3) Transmission mode: synchronization 4) Data interface: V.35 or V.24 / RS232C DCE 5) Clock: master clock; slave clock; external clock 6) Testing methods: local analogy loopback test; remote digital loopback test Feature: 1) Power supply: 220VACf+10%, 50Hz 48V DC (optional) 2) Power consumption: 5W 3) Volume: 225 x 145 x 40mm; 9" (L) x 5.8" (W) x 1.6" (H) 4) Temperature: 0 - 40fpC
Formatters Random Regex Text More New: Boost your productivity. Get our free Chrome extension. Regex Tools Remove Special Characters Remove Special Characters The tool can be used to remove special characters from text. More. Input | Keep alphanumeric & spaces only 528 char(s) Hand tufted from 100% New Zealand Wool. Pile height varies between 10 - 12 mm which means its supremely cozy to lounge and walk on. New Zealand Wool Hand-Tufted W 5\' x L 8\' Patterned Rug Rug Thickness : 10 - 12 mm Cleaning� : Do not wash. We recommend gently vacuuming this rug once or twice weekly with a brush attachment. Do not use an abrasive rotary brush head as this may damage to the rug. Stain Removal� : Wipe the stain carefully with a mixture of lukewarm water. Absorb excess liquid with a dry microfiber cloth. Output 508 char(s) Hand tufted from 100 New Zealand Wool Pile height varies between 10 12 mm which means its supremely cozy to lounge and walk on New Zealand Wool HandTufted W 5 x L 8 Patterned Rug Rug Thickness 10 12 mm Cleaning Do not wash We recommend gently vacuuming this rug once or twice weekly with a brush attachment Do not use an abrasive rotary brush head as this may damage to the rug Stain Removal Wipe the stain carefully with a mixture of lukewarm water Absorb excess liquid with a dry microfiber cloth This is a client-side utility. Your data will NOT leave your own browser. Copy shareable link is limited to 5,000 characters as it uses a client-side feature. How it works? Remove Special Characters online: The tool can be used to remove special characters from text. Keep alphanumeric & spaces only: Remove all non-alphanumeric & and non-spaces characters from the text. Keep alphanumeric only: Remove all non-alphanumeric characters from the text. Keep numeric & spaces only: Remove all non-numeric & non-space characters from the text. Keep numeric-only: Remove all non-numeric characters from the text. Keep ASCII only: Remove all non-ASCII characters from the text. See the examples of usage below. Examples Input (Keep alphanumeric & spaces only) !#This tool removes $special *characters* /other/ than! digits, characters and spaces!!!$ Output (Keep alphanumeric & spaces only) This tool removes special characters other than digits characters and spaces Tutorials How to remove special characters from text Follow these steps to quickly delete unwanted symbols from the input. Prepare your text Have your text with unwanted characters ready. Enter the data Paste your data or load the file into the input area. Select the option Click on the "Options" and select the desired character set you want to keep. Submit Click the "Submit" button. You should now see the clear text output. All done Your data is ready. Click the "Copy to Clipboard" button and you should be ready to rock! Additional Resources Alphanumeric characters - Wikipedia Remove special characters using JavaScript - HowToBits.com Related tools Extract emails from text Extract URLs from text Hashtag Extractor IP Extractor Looking for something else? In case you are looking for something else than this functionality, please let us know by contacting us. The most common requests will be made available (for free) once possible. Share the word Text-Utils.com is one of the most powerful, secure and free websites containing various tools for helping with your daily tasks, such as online formatters (XML, JSON, SQL and HTML), encoding (Base64, Hashes), converters (binary, XML, JSON), multiple text tools, such as to remove duplicate lines, extract text and much more. Enjoy all for free! CATEGORIES Converters Encoders Escape Tools Formatters Numbers Random Regex Tools Text Tools Web Tools POPULAR TOOLS JavaScript Object to JSON JSON Formatter XML Formatter Remove Special Characters Find and replace Remove Duplicate Lines Remove Lines Containing Sort text lines MORE Contact About © 2021 Copyright: Text-Utils.com | Privacy Policy Follow us on Twitter: textutils
Nonwoven fabrics are broadly defined as sheet or web structures bonded together by entangling fiber or filaments (and by perforating films) mechanically, thermally or chemically. They are flat or tufted porous sheets that are made directly from separate fibres, molten plastic or plastic film. They are not made by weaving or knitting and do not require converting the fibres to yarn. Typically, a certain percentage of recycled fabrics and oil-based materials are used in nonwoven fabrics. The percentage of recycled fabrics varies based upon the strength of material needed for the specific use. In addition, some nonwoven fabrics can be recycled after use, given the proper treatment and facilities. For this reason, some consider non-woven a more ecological fabric for certain applications, especially in fields and industries where disposable or single use products are important, such as hospitals, schools, nursing homes and luxury accommodations. USES IN- isolation gowns surgical gowns surgical drapes and covers surgical masks surgical scrub suits caps medical packaging: porosity allows gas sterilization gloves shoe covers bath wipes wound dressings
Power Module Monitoring module Eltek SMARTPACK WEB/SNMP 242100.118
Interface converter Introduction: Ne2701bridge (also called 2mbps g.703 / ethernet interface converter) serves as a type of data communication equipment to transparently and directly convert the transmit data from 2m g.703 interface into ethernet. It is ideal for the case where low-cost bridging is required. It also can be used as a lan extension. When used as extension or segment switch, it has two working status, namely filtering and non-filtering, to determine whether all communication traffic is allowed to transport to wan circuit or not. Main features: (1 e1interface (1 utp interface, for connection to network card or hub (optional clock: internal clock (master mode); receiving and recovering clock (complete alert and status display 210mm140mm38mm
Max throughput: Base: 1Gbps (load balancing), 450 Mbps (standalone) , 250 Mbps (peered). Higher performance available in Truffle E, EC, EF models. Max number of concurrent IP sessions: 150,000 (1,000,000 with Truffle E, EC, EF, EX models). Device management: Cloud based, SNMP, Remote Syslog, Email alerts. DHCP and DNS servers: DNS relay, Parallel DNS optimization, DHCP server. DDNS: Support for dynamic DNS for multiple interfaces WAN Configuration: Static IP, PPPoE, DHCP or passthrough. Failover-only or aggregate modes for cellular and other WAN ports. Interface binding. Routing: NAT and IP forwarding, QoS and inbound/outbound VOIP quality management
Eltek 242100.118 Smartpack WEB/SNMP Smartpack Controller Monitoring And Control Unit 242100.118 Smartpack WEB/SNMP (Ethernet, 6 + 6 I/O, 1 String Battery connection) 242100.000 Smartpack Basic Slave (without display, buttons & internal power for distributed systems) 242100.300 Battery Monitor 242100.301 Load Monitor 242100.304 I/O Monitor (Outdoor) 242100.200 Smartnode RS232/485
Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console They can realize the integrated management to all chassis. Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port. Supporting remote and local management. With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters. Standard package
Overview: GVE-Tplus is E1 to V.35/V.24/RS232 and Ethernet Converter. Other series interface RS449/RS530/X.21 also can be optional. E1 port can support BNC/75ohm and RJ45/120ohm optional. This device provides an economical digital access solution for E1 and fractional E1 network services. With a adapter cable, the device can connect to other DTE device, such as router, at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame, using only the required number of timeslots, timeslot assignment is accomplished according to the data port speed and manual setting of DIP switches. The V.35 or V.24/RS232 and Ethernet share the 2Mbps bandwidth, the total bandwidth of the 2 interfaces must be not more than 1984Kbps.GVE-Tplus is widely used in communication network, both in WAN and LAN connection field. Features: *Comply with ITU V.35, G.703, G.704, G.706, G.823 *Full comply with IEEE 802.3 /IEEE 802.1Q (VLAN) *Framed (N*64Kbps) and unframed (2.048Mbps) optional *Ethernet port 10Mbps, Full/Half Duplex mode compatible *Frame mode support PCM30/PCM31 *Support CRC4 *Support internal clock, E1 recovery clock or V.35 line clock *Provide analog and digital loopback and remote digital loopback test *For E1 interface, 75ohm (unbalanced) and 120ohm (balanced) optional *For data interface, V.35 and V.24/RS232 optional *Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state *Stand-Alone and Rack-Mount available *16-slots, elaborate cooling design and two redundant power supplies *Support management *-48V DC & 220V AC power supply optional Specifications: E1 & FE1 interface Comply with ITU G.703,G.704,G.706,G.823 Rate:2.048Mbps;N*64Kbps(N=1~31) Code type:HDB3 Impedance:75ohm unbalanced & 120ohm balanced optional Physical interface:BNC coaxical for unbalanced RJ45 twisted pair for balanced Ethernet interface Comply with IEEE 802.3/IEEE 802.3Q(VLAN) Rate:10Mbps,Half/Full auto-negotiation MDI/MDI-X optional Physical interface:10 Base-T(UTP);RJ45 V.35,V.24/RS232 interface Comply with V.35,V.24/RS232 standard Rate:2048Kbps;N*64Kbps(N=1~31) Transmission mode:Synchronization Data interface:V.35 or V.24/RS232 Physical interface:DB25 female jack,V.35 via external adapter Work mode:DCE Power supply AC power:220V¡¨¤10%,50Hz DC power:-48V(optional) Power:5W Environment Temperature:0¡«40¡æ Humidity:0¡«95% RH Carton.
Contact: amily[at]veecom dot com dot cn GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter. GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line. GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast. 245mm*215mm*50mm
Micro controller based numeric protection, control & automation devices, single phase voltage monitoring relays, three phase voltage monitoring relays, multifunctional time delay relays, motor protection relays, automatic phase selectors, overcurrent relays & power limiters, temperature controllers, power quality analyzers and data loggers, programmable & astronomical timers, protocol converters & interface controllers for iot, food products powdered chutneys flaxseeds, rice, toordal, millets, electrical relays.Distributors
Media converter Two 10/100m electrical ports, one single-mode or multi-mode optical port Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions. Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted Supports management based on web, snmp, telnet or local console Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found) Supports llcf(report the disconnected alarm message to local network administration) Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management Supports open or close electrical and optical ports through via the far end network management Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp Physical property: Input power: ac 100v~220v or dc 48v Dimension: 191mm x 110mm x 25mm Environment requirements: Operating temperature: 0¦-50¦ Storage temperature: -40¦-70¦ Environment humidity: 5-90%(non-condensing) Export carton with inner box
Overview: Dhodt-eoc is a converter for stm-1 converter electrical and optical interface conversion. It is designed for the pdh equipment coaxial interface and optical interface interconnect. Dhodt-eoc is an interface converter for stm-1 electrical and optical interface conversion.It is designed for the sdh equipment coaxial interface and optical interface interconnect, as well as the atm 155.520 mbps interface and sdh device interconnection. Complete loopback facility is supported for system diagnostic and commissioning.Compact casing and simple operation achieve the cost saving and investment protected. Features: 1. High reliability, comply with itu-t g.703 and g.957 2. Single fiber bi-directional is selectable 3. State-of-the-art design, ensure normal working under different environment. 4. Supports local and remote loop-back on electrical or optical interface for system diagnostic. 5. Suitable for sdh and atm 155.52 mbps interface interconnection. 6. Simple operation and maintenance 7. Compact design and low power consumption. Specifications: Electrical interface Standard:itu-t g.703 compliant Data rate:155.52 mbps Line code:cmi Physical connector:bnc coaxial Optical interface Standard:itu-t g.957 stm-1 Bit rate:155.520 mbps Coding:nrz Connector:sc Light source:laser diode Wave length:1310nm (typical), or 1550nm (optional) or single Fiber bi-directional (optional) Transmit power:-12dbm (1310nm) / -5dbm (1550nm) Receive sensitive:-36dbm (1310nm) / -38dbm (1550nm) Power supply Ac 220v10%, 50hz Dc¡¡ìc48v (optional) Consumption:5w Environment Temperature:050 Humidity: 90% (non condensing) Dimension Wd(mm): 245 x 215 x50 Carton.
-10/100M self-adaptive Ethernet Interface -Support ATUO MDI/MDIX, allowing crossover cable connection or straight-through cable connection -Selectable Baud rate between 1299bps and 921.6Kbps -Build-in WEB server, allowing users to configure their webpage easily -Auto reconnection after a network break, ensure the reliable TCP connection for the whole network -Support DNS, can achieve a communication using the domain name -Compatible to SOCKET working modes (TCP Server, TCP Client, UDP and etc.), the upper layer machine software is written strictly following the SOCKET rules -TCP modes supports multi connections, specific data sending after password verifying, allowing up to 4 user to manage a single embedded device at a same time -Advanced security mechanisms, prevent illegal access from unauthorized visitors, provide IP verifying firewall, and up to 8 configurable IP or IP segment certifications -Support the local and remote upgrading of the firmware;Support AT Command configuration;Support remote configuration -16 bits ARM7 CPU; -Ethernet: 10/100Mbps -Protections: build-in 2KV surge protection -Type:RS232, RS485 -Control Signals :TXD,RXD,GND -Parity: None, Even, Odd -Data Bit: 5, 6, 7 or 8 bits -Stop Bit: 1 or 1.5 bits -Flow Control: Non -Baud Rate: 1200bps~921.6Kbps -Compatible Protocol: Ethernet, ARP, IP, UDP, TCP, BootP -Network Services: DHCP, DNS, PPPoE, TFTP, HTTP, UDP Broadcasting -Client/Server: Server -Ethernet Connector: RJ-45 -Ethernet Speed/Duplex: Auto-negotiation 10/100Mbps, Full/Half duplex -Auto-MDIX: Yes -WOL: Magic Packet, Wakeup Frame, Link-Up events -Software Tool: VSP Driver, DS Manager, Web Server -Configuration Mode: Web browser configuration tool, Windows Hyper Terminal, Telnet, Serial port configuration -Power Input: 3.3V DC -Physical Size (Wí-Dí-H): 77.5í-41.7í-22.7(mm)
10gbps fiber to copper media converter for long distance transmission Network management function web snmp console Support dmi function for sfp+ fiber module Support itut prescribed dwdm/cwdm wavelength Media converter for network backbone(san, lan, man) Support 2u rack (16 channel) and standalone use Support jumbo frame Sfp+ fiber module detection, utp cable length detection Support hot plugging Type: rj45 to/from sfp+. Standard package per customer
10/100 MBPS managed media converter Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. Hardware Function Support 10Base-T, 100Base-TX, 100Base-FX Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards Up to 5km distance on multi mode optical port and 120km distance on single mode optical port High-performance auto-negotiation chips make sure the data transfer with higher Security, stability and without block. Up to 1916 bytes package forwarded Support half/full duplex mode Auto-negotiate Low power consumption, low heat generation and excellent compatibility 10Watt professional communication power supply module inside the standalone. Chassis supports double redundant power supply modules and each power supply module Supports up to 100 Watt power output for the security and stability Support hot-swap for all the modules, but not including management module Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable. Device Size Standalone: 132mm (width)*36mm (depth)*122mm (height) 19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)
Built-in ip-based web interface. Supporting remote and local management. Store and forward mechanism, supporling ieeee 802.3x frame flow control for full-duplex mode Manual ip address setting/dhcp client for ip address assignment. Event trap and snmp trap support. Password setting, ip setting and devices description setting through planet smart discovery utility Choice of fiber-connector from sc, lc, wdm, multi-mode / single-mode fiber /1000base-sx / lx mini gbic module. Standard package per customer